.260 and Berger vld 130 grain

[fmsniper]

260, 130 grain VLD
200 yard target
3 shots .535
4th was after I changed parallax

46 grain 4831SC
COAL 2.892

elev .4 Mils / Vortex PST Scope FFP
Rifle:
Rem 700 Stainless, blue printed, Kreiger barrel, MCS MAnners stock with Badger Mini chassi, AI Mag, Jewel trigger

 

[T2CH]

Very nice, I'm working on a load with these now.

 

[jcampbellsmith]

Very, very nice. Regards JCS

 

[fmsniper]

it likes 140 vlds too

 

[fmsniper]

fyi at 2.892 it does not feed from the magazine

 

[psinclair]

fyi at 2.892 it does not feed from the magazine

Good shooting!

Remove the plate in the front of the mag and you'll be GTG with that COAL...........

 

[fmsniper]

I will take a look, thanks

 

[JB02]

Something else you can do is buy a 300 WSM mag from accurate mag and bend the feed ramps to fit. HS precision sells a magazine feed lip adjustment tool that works well and comes with the appropriate dimensions for the forward and after ends. Or, you can test your luck with a type 2 alpha mag

 

[RugerSlinger]

I have had very good luck with the alpha 2 mags. I own 4 of them and they are all great.

 

[Red_SC]

What velocity are you getting with the 130s? I'm getting around 2915 with 4350 in a 24" tube, and have never played around with 4831 in this caliber.

 

[fmsniper]

crono is broke

 

[tho98027]

What velocity are you getting with the 130s? I'm getting around 2915 with 4350 in a 24" tube, and have never played around with 4831 in this caliber.

How much powder?

 

[fmsniper]

46 grains 4831SC

 

[Red_SC]

How much powder?

44.3 gr h4350, 130 Berger, Rem 7mm08 brass, .030 or so off the lands.