Gunsmithing 280 Ackley Imp. Medium Hunter Allen S.

LRI

Lance Criminal
Full Member
Minuteman
  • Mar 14, 2010
    6,355
    7,768
    53
    Sturgis, S. Dakota
    www.longriflesinc.com
    Here we go Allen. Getting her setup to run next.

    Were rockin this bugger now!

    This action is a freak! It's a BAT Machine Model RL. Lots of features, facets, lugs, etc. Going to be fun programming this bugger.

    Rastor the tang to a vector file:

    DSC_0002-1.jpg


    DSC_0003.jpg


    Setting up the stock:

    DSC_0002.jpg


    DSC_0001.jpg


    More to come. . .
    smile.gif






    C.

    DSC_0002.jpg


    DSC_0001.jpg
     
    Re: 280 Ackley Imp. Medium Hunter Allen S.

    The receiver has 32 facets all the way around it. I was able to mirror this in the inlet surface model. This should be pretty cool. I speculate its often debated if we truly do surface model each receiver.

    Hopefully this will settle the debate a bit. They are difficult to see in the CAD drawing. I could dicker around with the shading/lighting feature to illustrate it better, but I know they are there due to how I generated it. Lofted surfaces are handy for features like this.


    DSC_0001-2.jpg





    On we go. More to come. We'll be bedding this one today as well.

    5x so far this AM. Not too chabby!
    smile.gif


    C.
     
    Re: 280 Ackley Imp. Medium Hunter Allen S.

    Chad i have a question on a different build you did.On a 300 norma mag the barrel had skip fluting on it did you d o the fluting on the barrel or did the barrel maker do it.
     
    Re: 280 Ackley Imp. Medium Hunter Allen S.

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rottenron</div><div class="ubbcode-body">Chad i have a question on a different build you did.On a 300 norma mag the barrel had skip fluting on it did you d o the fluting on the barrel or did the barrel maker do it. </div></div>

    Brux barrels in lodi wi.

    C.
     
    Re: 280 Ackley Imp. Medium Hunter Allen S.

    SORRY Guys I apologise i did not mean to be rude and brake in on the thread.I seen it on his web and i had to know i liked it alottttt.I will be getting a hold of you chad for my necks build.I like your work a lot your an artist.And like always the 280 looks awesome grate job chad.Sorry again