Does anyone have experience with the 300 NORMA MAG? Would like to know the ballistics capabilities of the 208 A-MAX and 240 SMK. Also, what barrel length is optimal for a full propellant burn?
Thanks
Thanks
Re: 300 NORMA MAG ?
260shooter,
No recent experience with the 308 Norma Mag, as I last owned one 20 + years ago. But brass for the 308 Norma has always been problematical. Unless using original Norma brass, you have to generally use a case forming die. You could use 338 Win mag brass, without a die, but they do come out a might short. When using 300 Win Mag brass to from 308 Norma, you do need a special (about $50.) case forming die, to do it right.
Easier to form, load and shoot, is the 30-338. You use the same load data, as the 308 norma mag, but case forming from the original 338 win was one pass through a regular 30-338 FL Die.
In my 30-338 and 308 Norma I used the same load with a 200 bullets: 72 Grains H-4831, Federal 215 Primer, WW brass.
The 308 Norma, and 30-338 have the same capabilities as the 300 Win Mag. but use slightly less powder. Both cases are a bit easier to reload than the 300 Win mag, as I always found the 300 Win Mag neck a bit short. But in reality there is not much difference in the 30-338, 308 Norma and 300 Win Mag performance wise.
Good brass is easier to come by in the 30-338 and 300 win mag. Unless you have an existing 308 Norma mag, I really cannot see any sound reason to build one, unless just wanting something different.
Barrel length wise my 30-338 had a 22" barrel, and my 308 Norma Mag had a 24" Barrel. No crono back in the Mid 80"s so I have no idea of their velocities. The 22" 30-338 shot well though.
Best of luck,
Bob
260shooter,
No recent experience with the 308 Norma Mag, as I last owned one 20 + years ago. But brass for the 308 Norma has always been problematical. Unless using original Norma brass, you have to generally use a case forming die. You could use 338 Win mag brass, without a die, but they do come out a might short. When using 300 Win Mag brass to from 308 Norma, you do need a special (about $50.) case forming die, to do it right.
Easier to form, load and shoot, is the 30-338. You use the same load data, as the 308 norma mag, but case forming from the original 338 win was one pass through a regular 30-338 FL Die.
In my 30-338 and 308 Norma I used the same load with a 200 bullets: 72 Grains H-4831, Federal 215 Primer, WW brass.
The 308 Norma, and 30-338 have the same capabilities as the 300 Win Mag. but use slightly less powder. Both cases are a bit easier to reload than the 300 Win mag, as I always found the 300 Win Mag neck a bit short. But in reality there is not much difference in the 30-338, 308 Norma and 300 Win Mag performance wise.
Good brass is easier to come by in the 30-338 and 300 win mag. Unless you have an existing 308 Norma mag, I really cannot see any sound reason to build one, unless just wanting something different.
Barrel length wise my 30-338 had a 22" barrel, and my 308 Norma Mag had a 24" Barrel. No crono back in the Mid 80"s so I have no idea of their velocities. The 22" 30-338 shot well though.
Best of luck,
Bob
Re: 300 NORMA MAG ?
Bob
Thanks for the input, but I'm interested in the .338 Norma Mag necked down to .30 cal.
Bob
Thanks for the input, but I'm interested in the .338 Norma Mag necked down to .30 cal.
Re: 300 NORMA MAG ?
260 shooter,
My apologies. I missed that part, 300 Norma vs 308 Norma. Quite stupid of me in fact. I had forgotten about the newish 338 Norma Mag. I'll go back to my old guy nap now.
Thanks for pointing it out so politely.
Bob
260 shooter,
My apologies. I missed that part, 300 Norma vs 308 Norma. Quite stupid of me in fact. I had forgotten about the newish 338 Norma Mag. I'll go back to my old guy nap now.
Thanks for pointing it out so politely.
Bob
Re: 300 NORMA MAG ?
PM Bluejazz here.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bluejazz</div><div class="ubbcode-body">I am reloading for a 30 cal wildcat on the 338 Norma case. Using 90-92 gr of H1000 and Retumbo. Getting 3150-3200fps with the 210 Berger's.</div></div>
PM Bluejazz here.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bluejazz</div><div class="ubbcode-body">I am reloading for a 30 cal wildcat on the 338 Norma case. Using 90-92 gr of H1000 and Retumbo. Getting 3150-3200fps with the 210 Berger's.</div></div>
Re: 300 NORMA MAG ?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 260 shooter</div><div class="ubbcode-body">Bob
Thanks for the input, but I'm interested in the .338 Norma Mag necked down to .30 cal. </div></div>
Not quite, but 30-338 Lapua was tested here years ago already.
Great cal but barrels are gone between 1000 and 1500 shots.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 260 shooter</div><div class="ubbcode-body">Bob
Thanks for the input, but I'm interested in the .338 Norma Mag necked down to .30 cal. </div></div>
Not quite, but 30-338 Lapua was tested here years ago already.
Great cal but barrels are gone between 1000 and 1500 shots.
Re: 300 NORMA MAG ?
260shooter,
I have switch to H1000, using 89gr with the 210 Berger's.
Velocity is running in the 3140fps range. Could push it harder, but don't feel the need. Accuracy is excellent where I am at, and I have brass with 10 reloads, showing no primer pocket expansion. I have not done any load developement with 240 SMK, as at present I don't see any gain to be had going to them. Some quick calculations show there is no significant gain in trajectory using the 240gr SMK. My rifle is called a 300 JAZZ. It is a 338 Norma Mag necked down to 30cal, with a 30 degree improved shoulder. My barrel length is 28", 1.30 @ breech, #5 contour. My COAL with the 210 Berger's w/BT seated at the neck/shoulder junction is less than 3.50 and easily fits in a standard magwell or DM box system. I would think a 26" barrel would also be fine, as that is what alot of 338 Norma Mag are built on. The 300 Norma should be a great cartridge as well.
260shooter,
I have switch to H1000, using 89gr with the 210 Berger's.
Velocity is running in the 3140fps range. Could push it harder, but don't feel the need. Accuracy is excellent where I am at, and I have brass with 10 reloads, showing no primer pocket expansion. I have not done any load developement with 240 SMK, as at present I don't see any gain to be had going to them. Some quick calculations show there is no significant gain in trajectory using the 240gr SMK. My rifle is called a 300 JAZZ. It is a 338 Norma Mag necked down to 30cal, with a 30 degree improved shoulder. My barrel length is 28", 1.30 @ breech, #5 contour. My COAL with the 210 Berger's w/BT seated at the neck/shoulder junction is less than 3.50 and easily fits in a standard magwell or DM box system. I would think a 26" barrel would also be fine, as that is what alot of 338 Norma Mag are built on. The 300 Norma should be a great cartridge as well.
Re: 300 NORMA MAG ?
BLUEJAZZ
Very insightful. Any ideas on barrel life?
BLUEJAZZ
Very insightful. Any ideas on barrel life?
Re: 300 NORMA MAG ?
I only have 120 rds down the tube doing load developement and trajectory validation, so I can't tell you about barrel life. It is an over bore situation, but not that extreme. I would guess that 0.50 MOA accuracy would go to about 1,000-1200 rounds with a little bit of chasing the lands thrown in for fun.
I only have 120 rds down the tube doing load developement and trajectory validation, so I can't tell you about barrel life. It is an over bore situation, but not that extreme. I would guess that 0.50 MOA accuracy would go to about 1,000-1200 rounds with a little bit of chasing the lands thrown in for fun.
Re: 300 NORMA MAG ?
260 shooter,
Hey!
Getting ready to build a .300 Norma mag myself reamer is on the way. It will shoot and barrel life should be close to the Hulk at about 2000-3000 rounds of pin point accuracy. This cartridge will shoot out to one-mile no problem with 208's and or 240's.
Retumbo or H-1000 will do the trick with about 82-85 grs. with 240's and 88- 90 grns. with 208's - 210's. Velocitys will be around 3100-3200 with 208-210 and 2900 plus with 240's.
Barrel life is greatly misunderstood with most rifles. 1000 yard BR proves it a bunch.
Hope to see you and your daughter again soon!
Tom
260 shooter,
Hey!
Getting ready to build a .300 Norma mag myself reamer is on the way. It will shoot and barrel life should be close to the Hulk at about 2000-3000 rounds of pin point accuracy. This cartridge will shoot out to one-mile no problem with 208's and or 240's.
Retumbo or H-1000 will do the trick with about 82-85 grs. with 240's and 88- 90 grns. with 208's - 210's. Velocitys will be around 3100-3200 with 208-210 and 2900 plus with 240's.
Barrel life is greatly misunderstood with most rifles. 1000 yard BR proves it a bunch.
Hope to see you and your daughter again soon!
Tom
Re: 300 NORMA MAG ?
Tom
Thanks for the input. Other than better brass and case length, is the 300 Norma that much better than the 300 RUM?
Would love to get back over to your place but days off have just changed. So it will probably be next spring before we get back.
Tom
Thanks for the input. Other than better brass and case length, is the 300 Norma that much better than the 300 RUM?
Would love to get back over to your place but days off have just changed. So it will probably be next spring before we get back.
Re: 300 NORMA MAG ?
I do not have a 300 Norma, but my 300 JAZZ is based on the same parent case, just more case capacity than the 300 Norma.The differences that I see between the 300 Norma and the 300 RUM is that the 300 Norma does it with less powder, and allows you to seat the base of the bullets at the neck shoulder junction and still use a standard magbox length of 3.60. I shoot 210gr Berger's and my COAL is 3.500. This allows the use of the standard magwell and not have to go with a Wyatt magbox, which I have had to do in the past. With the 300 RUM and Berger bullets, you have to seat the bullet deeper in the case to get it to fit in the standard magbox, thereby using up case capacity. For some this is not an issue. I like the BT of my bullets seated slightly above the neck/shoulder junction. The 300 Norma should be a very efficient cartridge.
I do not have a 300 Norma, but my 300 JAZZ is based on the same parent case, just more case capacity than the 300 Norma.The differences that I see between the 300 Norma and the 300 RUM is that the 300 Norma does it with less powder, and allows you to seat the base of the bullets at the neck shoulder junction and still use a standard magbox length of 3.60. I shoot 210gr Berger's and my COAL is 3.500. This allows the use of the standard magwell and not have to go with a Wyatt magbox, which I have had to do in the past. With the 300 RUM and Berger bullets, you have to seat the bullet deeper in the case to get it to fit in the standard magbox, thereby using up case capacity. For some this is not an issue. I like the BT of my bullets seated slightly above the neck/shoulder junction. The 300 Norma should be a very efficient cartridge.
Re: 300 NORMA MAG ?
Square me away if I’m wrong... but I owned a .308 norm mag... Is that what you guys are calling a 300 Norma Mag...?
Or is the 300 Norma Mag specifically a 338 Norma necked down to the .308?
I have some of the .308 NM Brass if someone wants it... has 3 uses
.
Square me away if I’m wrong... but I owned a .308 norm mag... Is that what you guys are calling a 300 Norma Mag...?
Or is the 300 Norma Mag specifically a 338 Norma necked down to the .308?
I have some of the .308 NM Brass if someone wants it... has 3 uses
.
Re: 300 NORMA MAG ?
NOrma had the 308 norma magnum and I think a 358 nrma mag. back in the past.
As they were releasing the 338 norma mag, they have thought about the 300 and 375 norma mag. ( beltless) whihc I guess come from necking down and up the 338.
Blaser is now also looking at these cartridges as they are releasing the 7 blaser mag, 300 blasert mag, 338 blaser mag and 375 blaser mag.. so I guess we will see a lot of these in the future.
NOrma had the 308 norma magnum and I think a 358 nrma mag. back in the past.
As they were releasing the 338 norma mag, they have thought about the 300 and 375 norma mag. ( beltless) whihc I guess come from necking down and up the 338.
Blaser is now also looking at these cartridges as they are releasing the 7 blaser mag, 300 blasert mag, 338 blaser mag and 375 blaser mag.. so I guess we will see a lot of these in the future.
Re: 300 NORMA MAG ?
.300 Norma mag is the .338 Norma necked down to .300. same (14,93mm) head size. Slightly more case taper but uses exactly the same headspace guages as the .338 Norma.
Bullet of choice...240grn Sierra MK.
Once I have some loads, I'll post them. Dafe Kiff makes the reamers.
Cases can be formed from .338 Norma brass (available from Black Hills). - .338 Norma cases are made with ½ deg taper sepcified for the .300 chamber so no problems there. The .338 Chamber has marginally less taper, but the cases are slighly undersized.
.300 Norma mag is the .338 Norma necked down to .300. same (14,93mm) head size. Slightly more case taper but uses exactly the same headspace guages as the .338 Norma.
Bullet of choice...240grn Sierra MK.
Once I have some loads, I'll post them. Dafe Kiff makes the reamers.
Cases can be formed from .338 Norma brass (available from Black Hills). - .338 Norma cases are made with ½ deg taper sepcified for the .300 chamber so no problems there. The .338 Chamber has marginally less taper, but the cases are slighly undersized.
Re: 300 NORMA MAG ?
So basically if you have .338 Norma brass neck it down and you have .300 Norma ?
If one was thinking of building a hunting rifle and was considering .300 winnie but was also having a .338 Norma built in a heavy platform then this really might be an option ?
Will it perfrom from a 26" barrel ? How much more over a .300 winnie using the 210 berger would one expect with a 26" tube ?
So basically if you have .338 Norma brass neck it down and you have .300 Norma ?
If one was thinking of building a hunting rifle and was considering .300 winnie but was also having a .338 Norma built in a heavy platform then this really might be an option ?
Will it perfrom from a 26" barrel ? How much more over a .300 winnie using the 210 berger would one expect with a 26" tube ?
Re: 300 NORMA MAG ?
man I bet that is a barrel burner, 338 necked down to a 300
man I bet that is a barrel burner, 338 necked down to a 300
Re: 300 NORMA MAG ?
PC3 If you are looking at a hunting round, you would do better to go with the .300 Blaser magnum. Factory ammo available from both Norma and Blaser, good case life, fits in some actions better etc, mag holds more etc.
The .300 Norma is designed to give best accuracy with 215 -240grn bullets and the throat design reflects this. I would venture that for hunting you will be wanting top accuracy with 180-200grn bullets.
.300 blaser is based on .404 case as oposed to .416 rigby of the Norma. ie only 8 thou fatter than .300 Win is across the belt. But being beltless it holds 12% more powder. In the Blaser rifles we are tipically seeing ½ moa with 180grn Noslers.
PC3 If you are looking at a hunting round, you would do better to go with the .300 Blaser magnum. Factory ammo available from both Norma and Blaser, good case life, fits in some actions better etc, mag holds more etc.
The .300 Norma is designed to give best accuracy with 215 -240grn bullets and the throat design reflects this. I would venture that for hunting you will be wanting top accuracy with 180-200grn bullets.
.300 blaser is based on .404 case as oposed to .416 rigby of the Norma. ie only 8 thou fatter than .300 Win is across the belt. But being beltless it holds 12% more powder. In the Blaser rifles we are tipically seeing ½ moa with 180grn Noslers.
Re: 300 NORMA MAG ?
Here is a pic of my LR hunting rig .<span style="font-weight: bold">300 JAZZ </span>(30-338 Norma w/ 30 degree shoulder).
Shooting 210 Berger's at 3140fps in a 28" barrel.
Adam, necking down a 338 to 308 is not that overbore, and does not dictate that it will be a barrel burner.
As stated before, I think the 300 Norma is going to be a great caliber, based on the performance I am seeing in my 300 JAZZ.
However, I thought the shoulder on the 300 Norma was bumped back alittle from the 338 Norma. At present I do not see an advantage to go with the 240gr SMK over the 210 Berger's that I am shooting now. Ran ballistics on both to 1000yds, and the 210 Berger's only give up approximately 100ft.lb of energy, and wind between the 2 are almost identicle.This is the first time I have used Norma brass, and find the quality very high in their 338 Norma brass. I have some cases that have 10 reloads on them and no signs of primer pocket expansion. These cases were used for load developement and checking pressure, so they were pushed pretty hard.
Here is a pic of my LR hunting rig .<span style="font-weight: bold">300 JAZZ </span>(30-338 Norma w/ 30 degree shoulder).
Shooting 210 Berger's at 3140fps in a 28" barrel.
Adam, necking down a 338 to 308 is not that overbore, and does not dictate that it will be a barrel burner.
As stated before, I think the 300 Norma is going to be a great caliber, based on the performance I am seeing in my 300 JAZZ.
However, I thought the shoulder on the 300 Norma was bumped back alittle from the 338 Norma. At present I do not see an advantage to go with the 240gr SMK over the 210 Berger's that I am shooting now. Ran ballistics on both to 1000yds, and the 210 Berger's only give up approximately 100ft.lb of energy, and wind between the 2 are almost identicle.This is the first time I have used Norma brass, and find the quality very high in their 338 Norma brass. I have some cases that have 10 reloads on them and no signs of primer pocket expansion. These cases were used for load developement and checking pressure, so they were pushed pretty hard.
Re: 300 NORMA MAG ?
Ganyana, despite the fact I will have 300 or so .338 Norma Cases on the way its a pain in the ass to get this stuff in Australia so the Blaser .300 will be harder I reckon. My brain is saying stick with .300 winnie my heart is saying .300 norma (but I have a few rifles that use exotic brass and sometimes that can get tiresome if you know what I mean) I plan to shoot 210 bergers, I have my scope 3.5-15x50 NXS Mildot and mil turrets ready to go just need to work out what platform and when.....
I will follow this thread with interest all the same. Isnt the whole theory of the .338 Norma case the fact that it fits fine in standard mags and therefore you can seat your pills out etc. ? Isee it as being a halfway in power between .300 winnie and .300 RUM. I like the non belted case and one could drive it at top .300 win speeds with really low pressure.
Ganyana, despite the fact I will have 300 or so .338 Norma Cases on the way its a pain in the ass to get this stuff in Australia so the Blaser .300 will be harder I reckon. My brain is saying stick with .300 winnie my heart is saying .300 norma (but I have a few rifles that use exotic brass and sometimes that can get tiresome if you know what I mean) I plan to shoot 210 bergers, I have my scope 3.5-15x50 NXS Mildot and mil turrets ready to go just need to work out what platform and when.....
I will follow this thread with interest all the same. Isnt the whole theory of the .338 Norma case the fact that it fits fine in standard mags and therefore you can seat your pills out etc. ? Isee it as being a halfway in power between .300 winnie and .300 RUM. I like the non belted case and one could drive it at top .300 win speeds with really low pressure.
Re: 300 NORMA MAG ?
pc3,
I don't think the 300 Norma gives up anything to the 300 RUM.I would estimate that they will be very similar in velocity, but the 300 Norma will get it done with slightly less powder and seat VLD bullets in a standard magbox of 3.60 As far as dies, I had to go custom, but if you are patient, I am sure that Forester or Redding will be coming out with them. My 338 Norma dies I got from Forester.
pc3,
I don't think the 300 Norma gives up anything to the 300 RUM.I would estimate that they will be very similar in velocity, but the 300 Norma will get it done with slightly less powder and seat VLD bullets in a standard magbox of 3.60 As far as dies, I had to go custom, but if you are patient, I am sure that Forester or Redding will be coming out with them. My 338 Norma dies I got from Forester.
Re: 300 NORMA MAG ?
BlueJazz - Jimmie Sloans original design of the .300 Norma was indeed slightly shorter. This has since been changed to alow the use of a single set of headspace guages for both .338 and .300 versions and give a perfect fit in a Single AI mag (so they don't have to have different mags).
pc3- Correctly headstamed Norma brass for the 300 will only be available to the public by the end of the year. All the current run is going to a couple of rifle makers. The Norma agent in Aussie is Parabellum Imports & Wholesales. (0)3 93 29 48 80. He can order .338 Norma brass, factory loaded .300 blaser or .300 blaser brass
As a target cartridge, the .300 Norma is the best available in .30 cal, but it is a pain to fit into many standard bolt actions as the case head is .584" (14.84mm) and you need a custom bolt for the remington 700. For a hunting rig, the .300 Blaser fits a regular magnum bolt face with perhaps a tiny bit of clean up, fits the same magazine box as the .300 win, but is a better design of both cartridge and chamber so you get a good 10%+ increase in performance over the 300 win. Cases for the .300 Blaser can be made from Bertram .404 brass if needs be.
BlueJazz - Jimmie Sloans original design of the .300 Norma was indeed slightly shorter. This has since been changed to alow the use of a single set of headspace guages for both .338 and .300 versions and give a perfect fit in a Single AI mag (so they don't have to have different mags).
pc3- Correctly headstamed Norma brass for the 300 will only be available to the public by the end of the year. All the current run is going to a couple of rifle makers. The Norma agent in Aussie is Parabellum Imports & Wholesales. (0)3 93 29 48 80. He can order .338 Norma brass, factory loaded .300 blaser or .300 blaser brass
As a target cartridge, the .300 Norma is the best available in .30 cal, but it is a pain to fit into many standard bolt actions as the case head is .584" (14.84mm) and you need a custom bolt for the remington 700. For a hunting rig, the .300 Blaser fits a regular magnum bolt face with perhaps a tiny bit of clean up, fits the same magazine box as the .300 win, but is a better design of both cartridge and chamber so you get a good 10%+ increase in performance over the 300 win. Cases for the .300 Blaser can be made from Bertram .404 brass if needs be.
Re: 300 NORMA MAG ?
ganyana,
Thanks for the update on the 300 Norma headspace.
As far as being a pain to do a 300 Norma on a Remington .700 bolt standard action, the rifle I have is built on a .700 bolt and was no trouble to build. Remington and Savage are just a couple of makers that are coming out with 338 Norma rifles on standard actions from what I understand, there will be others as well.
ganyana,
Thanks for the update on the 300 Norma headspace.
As far as being a pain to do a 300 Norma on a Remington .700 bolt standard action, the rifle I have is built on a .700 bolt and was no trouble to build. Remington and Savage are just a couple of makers that are coming out with 338 Norma rifles on standard actions from what I understand, there will be others as well.
Re: 300 NORMA MAG ?
Reviving this thread.
Now that 300 Norma Mag brass is available does anyone know where to get reloading dies for this caliber? Checking all the usual sources but to no avail.
Reviving this thread.
Now that 300 Norma Mag brass is available does anyone know where to get reloading dies for this caliber? Checking all the usual sources but to no avail.
Re: 300 NORMA MAG ?
I know RCBS used to make them, I have a FL set.
I know RCBS used to make them, I have a FL set.
Re: 300 NORMA MAG ?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Quickdraw40</div><div class="ubbcode-body">I know RCBS used to make them, I have a FL set. </div></div>
For the 300 Norma magnum? My understanding is it is a brand new cartridge. I've looked everywhere I know of and can't find any dies offered...... not a good thing.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Quickdraw40</div><div class="ubbcode-body">I know RCBS used to make them, I have a FL set. </div></div>
For the 300 Norma magnum? My understanding is it is a brand new cartridge. I've looked everywhere I know of and can't find any dies offered...... not a good thing.
Re: 300 NORMA MAG ?
Guess I didn't read closely enough either. I was referring to the 308 also. Good Luck.
Guess I didn't read closely enough either. I was referring to the 308 also. Good Luck.
Re: 300 NORMA MAG ?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C.K</div><div class="ubbcode-body">Forester has the dies, I got the seater die a month ago. </div></div>
Thanks, they did indeed have them but haven't yet updated their availability on the website. Much appreciated.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: C.K</div><div class="ubbcode-body">Forester has the dies, I got the seater die a month ago. </div></div>
Thanks, they did indeed have them but haven't yet updated their availability on the website. Much appreciated.
Re: 300 NORMA MAG ?
Does anyone have any firm load data for the Norma 300 Mag?
Does anyone have any firm load data for the Norma 300 Mag?
Re: 300 NORMA MAG ?
for those of you looking for the 300 Norma brass,
its available at Huntingtons.com Norma item # 26787A $166.98 per 100.
for those of you looking for the 300 Norma brass,
its available at Huntingtons.com Norma item # 26787A $166.98 per 100.
Re: 300 NORMA MAG ?
300 Norma
26.0 BBL
1.9 Twist Broughton
220 Sierra Match
OAL; 3.463 to 3.502
Powder; Ramshot Magnum 85.2 to 90.8gr
Primer; WLRMP
300 Norma
240 Sierra Match
3.436 OAL
Powder; N-560 80 to 81gr
Primer; Fed 215M
300 Norma
240 Sierra Match
3.436 OAL
Powder; H 1000 81.5 to 81.7gr
Primer; Fed 215M
240 Sierra Match
3.436 OAL
Powder; Ramshot Magnum 82.4 to 86.9gr
Primer; WLRMP
Reamers can be found, Dave Kiff ( PT&G )
300 Norma
26.0 BBL
1.9 Twist Broughton
220 Sierra Match
OAL; 3.463 to 3.502
Powder; Ramshot Magnum 85.2 to 90.8gr
Primer; WLRMP
300 Norma
240 Sierra Match
3.436 OAL
Powder; N-560 80 to 81gr
Primer; Fed 215M
300 Norma
240 Sierra Match
3.436 OAL
Powder; H 1000 81.5 to 81.7gr
Primer; Fed 215M
240 Sierra Match
3.436 OAL
Powder; Ramshot Magnum 82.4 to 86.9gr
Primer; WLRMP
Reamers can be found, Dave Kiff ( PT&G )
Re: 300 NORMA MAG ?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Have None</div><div class="ubbcode-body">300 Norma
26.0 BBL
1.9 Twist Broughton
220 Sierra Match
OAL; 3.463 to 3.502
Powder; Ramshot Magnum 85.2 to 90.8gr
Primer; WLRMP
300 Norma
240 Sierra Match
3.436 OAL
Powder; N-560 80 to 81gr
Primer; Fed 215M
300 Norma
240 Sierra Match
3.436 OAL
Powder; H 1000 81.5 to 81.7gr
Primer; Fed 215M
240 Sierra Match
3.436 OAL
Powder; Ramshot Magnum 82.4 to 86.9gr
Primer; WLRMP
Reamers can be found, Dave Kiff ( PT&G )
</div></div>
C'mon man! We need the velocities too!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Have None</div><div class="ubbcode-body">300 Norma
26.0 BBL
1.9 Twist Broughton
220 Sierra Match
OAL; 3.463 to 3.502
Powder; Ramshot Magnum 85.2 to 90.8gr
Primer; WLRMP
300 Norma
240 Sierra Match
3.436 OAL
Powder; N-560 80 to 81gr
Primer; Fed 215M
300 Norma
240 Sierra Match
3.436 OAL
Powder; H 1000 81.5 to 81.7gr
Primer; Fed 215M
240 Sierra Match
3.436 OAL
Powder; Ramshot Magnum 82.4 to 86.9gr
Primer; WLRMP
Reamers can be found, Dave Kiff ( PT&G )
</div></div>
C'mon man! We need the velocities too!
Re: 300 NORMA MAG ?
Jimmie, thanks a lot for the info.
Jimmie, thanks a lot for the info.
Re: 300 NORMA MAG ?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: steve123</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Have None</div><div class="ubbcode-body">300 Norma
26.0 BBL
1.9 Twist Broughton
220 Sierra Match
OAL; 3.463 to 3.502
Powder; Ramshot Magnum 85.2 to 90.8gr
Primer; WLRMP
300 Norma
240 Sierra Match
3.436 OAL
Powder; N-560 80 to 81gr
Primer; Fed 215M
300 Norma
240 Sierra Match
3.436 OAL
Powder; H 1000 81.5 to 81.7gr
Primer; Fed 215M
240 Sierra Match
3.436 OAL
Powder; Ramshot Magnum 82.4 to 86.9gr
Primer; WLRMP
Reamers can be found, Dave Kiff ( PT&G )
</div></div>
C'mon man! We need the velocities too! </div></div>
Here's 240 SMK info
Tabular trajectory data at Std.ICAO Atmosphere
-------------------------------------------------------------------------------------
Gun / Ammunition : .300 Norma Mag
Bullet : .308, 240, Sierra HPBT LR MatchK 9245
Bullet weight : 240 grains or 15.55 Grams
Muzzle velocity : 2829 fps
Crosswind speed : 1 Mph
Ballistic Coefficient(s) (G1):
C1=0.699@V>2150 fps;
C2=0.690@V>1800 fps;
C3=0.673@V>0 fps;
Optimum trajectory information :
Optimum sight-in range (X) = 202 Yds.
with max. ordinate above LOS at range (M)= 122 Yds.
and max. point blank range (P)= 234 Yds.
-------------------------------------------------------------------------------------
Sight-in clicks, 1 click = 1.0 cm/100 m or 0.394 in/100 m
Height of sight above bore axis = 5.0 cm or 1.969 inch
Gun is zeroed-in at 200 yds,
by sighting-in at level firing
-------------------------------------------------------------------------------------
Range Velo Time of Energy Path Deflection Total Sight correction Target
city flight to at crosswind drop for setting new lead
LOS of 1.0 Mph zero range 33 fps
-------------------------------------------------------------------------------------
·Yards fps s ft.lbs. in. in. MOA in. Clicks MOA yds ·
-------------------------------------------------------------------------------------
| 0 2829 0.0000 4265 -2.0 0.0 ----- 0.0 ------ ----- 0.00
| 27 2793 0.0289 4157 -0.6 0.0 0.02 0.2 +6.2 +2.14 0.32
| 54 2757 0.0583 4052 +0.4 0.0 0.03 0.6 -2.2 -0.76 0.64
| 81 2722 0.0880 3948 +1.1 0.0 0.04 1.5 -3.9 -1.33 0.96
| 108 2687 0.1181 3847 +1.5 0.1 0.06 2.6 -3.8 -1.31 1.29
M 122 2669 0.1339 3795 +1.5 0.1 0.06 3.4 -3.5 -1.20 1.46
| 135 2652 0.1486 3748 +1.5 0.1 0.07 4.2 -3.1 -1.05 1.62
| 162 2618 0.1794 3651 +1.1 0.1 0.08 6.1 -1.9 -0.66 1.96
| 189 2583 0.2106 3556 +0.4 0.2 0.09 8.3 -0.6 -0.20 2.30
X 200 2569 0.2234 3518 0.0 0.2 0.09 9.3 0.0 0.00 2.44
| 216 2549 0.2421 3463 -0.7 0.2 0.10 10.9 +0.9 +0.31 2.65
P 232 2529 0.2609 3409 -1.5 0.3 0.11 12.7 +1.8 +0.63 2.85
| 243 2515 0.2739 3372 -2.2 0.3 0.11 13.9 +2.5 +0.85 3.00
| 270 2482 0.3060 3282 -4.0 0.3 0.12 17.3 +4.1 +1.42 3.35
| 297 2449 0.3385 3195 -6.3 0.4 0.13 21.1 +5.9 +2.02 3.70
| 324 2415 0.3716 3109 -9.0 0.5 0.15 25.3 +7.7 +2.64 4.06
| 351 2383 0.4053 3025 -12.1 0.6 0.16 30.0 +9.6 +3.29 4.43
| 378 2350 0.4395 2943 -15.7 0.7 0.17 35.1 +11.5 +3.97 4.81
| 405 2318 0.4743 2863 -19.8 0.8 0.19 40.7 +13.6 +4.66 5.19
| 432 2286 0.5096 2785 -24.3 0.9 0.20 46.8 +15.6 +5.38 5.57
| 459 2254 0.5455 2708 -29.4 1.0 0.22 53.3 +17.8 +6.11 5.97
| 486 2223 0.5819 2633 -34.9 1.2 0.23 60.4 +20.0 +6.86 6.36
| 513 2191 0.6188 2559 -41.0 1.3 0.24 68.0 +22.2 +7.63 6.77
| 540 2160 0.6561 2487 -47.6 1.5 0.26 76.1 +24.5 +8.41 7.18
| 567 2129 0.6939 2416 -54.7 1.6 0.27 84.7 +26.8 +9.21 7.59
| 594 2098 0.7323 2346 -62.3 1.8 0.29 93.9 +29.1 +10.02 8.01
| 621 2068 0.7710 2278 -70.5 2.0 0.30 103.6 +31.5 +10.85 8.43
| 648 2037 0.8103 2212 -79.3 2.2 0.32 113.9 +34.0 +11.68 8.86
| 675 2007 0.8499 2146 -88.6 2.4 0.33 124.8 +36.5 +12.53 9.29
| 702 1977 0.8897 2083 -98.4 2.6 0.35 136.1 +38.9 +13.38 9.73
| 729 1947 0.9303 2020 -108.9 2.8 0.36 148.1 +41.5 +14.26 10.17
| 756 1918 0.9719 1959 -120.1 3.0 0.38 160.8 +44.1 +15.17 10.63
| 783 1888 1.0143 1900 -132.1 3.2 0.40 174.4 +46.9 +16.11 11.09
| 810 1860 1.0577 1843 -144.9 3.5 0.41 188.7 +49.7 +17.08 11.57
| 837 1831 1.1019 1787 -158.5 3.8 0.43 203.8 +52.6 +18.09 12.05
| 864 1803 1.1470 1733 -173.0 4.1 0.45 219.8 +55.6 +19.12 12.54
| 891 1775 1.1928 1679 -188.2 4.4 0.47 236.6 +58.7 +20.17 13.04
| 918 1747 1.2394 1626 -204.3 4.7 0.49 254.2 +61.8 +21.25 13.55
| 945 1719 1.2867 1575 -221.3 5.0 0.51 272.7 +65.0 +22.36 14.07
| 972 1692 1.3348 1525 -239.1 5.4 0.53 292.0 +68.3 +23.49 14.60
| 999 1665 1.3836 1477 -257.8 5.7 0.55 312.3 +71.7 +24.64 15.13
| 1026 1638 1.4330 1430 -277.4 6.1 0.57 333.4 +75.1 +25.82 15.67
| 1053 1612 1.4831 1384 -297.9 6.5 0.58 355.4 +78.6 +27.02 16.22
| 1080 1586 1.5338 1340 -319.3 6.8 0.60 378.3 +82.1 +28.23 16.77
| 1107 1560 1.5852 1296 -341.6 7.2 0.62 402.2 +85.7 +29.47 17.34
| 1134 1534 1.6371 1254 -364.8 7.6 0.64 426.9 +89.4 +30.72 17.90
| 1161 1509 1.6896 1213 -389.0 8.1 0.66 452.6 +93.0 +31.99 18.48
| 1188 1485 1.7428 1174 -414.2 8.5 0.68 479.3 +96.8 +33.29 19.06
| 1215 1460 1.7973 1136 -440.8 9.0 0.70 507.4 +100.8 +34.64 19.66
| 1242 1437 1.8531 1100 -468.8 9.4 0.73 537.0 +104.8 +36.04 20.27
| 1269 1414 1.9100 1065 -498.2 9.9 0.75 567.9 +109.0 +37.49 20.89
| 1296 1391 1.9681 1032 -529.1 10.5 0.77 600.3 +113.4 +38.98 21.52
| 1323 1370 2.0271 999 -561.3 11.0 0.79 634.1 +117.8 +40.51 22.17
| 1350 1348 2.0870 969 -595.0 11.5 0.82 669.3 +122.4 +42.08 22.82
| 1377 1327 2.1478 939 -630.1 12.1 0.84 705.9 +127.1 +43.69 23.49
| 1404 1307 2.2094 910 -666.5 12.7 0.86 743.8 +131.8 +45.33 24.16
| 1431 1287 2.2718 883 -704.4 13.3 0.89 783.2 +136.7 +47.00 24.84
| 1458 1267 2.3348 856 -743.6 13.9 0.91 824.0 +141.6 +48.70 25.53
| 1485 1249 2.3991 831 -784.7 14.5 0.93 866.6 +146.8 +50.46 26.24
| 1512 1230 2.4643 807 -827.4 15.2 0.96 910.8 +152.0 +52.25 26.95
| 1539 1213 2.5306 784 -872.1 15.8 0.98 957.0 +157.4 +54.10 27.68
| 1566 1196 2.5980 762 -918.6 16.5 1.01 1005.1 +162.9 +56.01 28.41
| 1593 1180 2.6663 742 -966.9 17.2 1.03 1054.9 +168.6 +57.96 29.16
| 1620 1164 2.7354 722 -1017.1 17.9 1.06 1106.6 +174.4 +59.95 29.91
| 1647 1149 2.8053 704 -1069.1 18.6 1.08 1160.2 +180.3 +61.98 30.68
| 1674 1135 2.8763 687 -1123.2 19.4 1.11 1215.8 +186.3 +64.07 31.46
| 1701 1121 2.9480 670 -1179.3 20.1 1.13 1273.4 +192.5 +66.19 32.24
| 1728 1108 3.0207 655 -1237.5 20.9 1.16 1333.1 +198.9 +68.37 33.03
| 1755 1096 3.0942 640 -1297.8 21.7 1.18 1394.9 +205.4 +70.60 33.84
| 1782 1084 3.1685 626 -1360.2 22.5 1.21 1458.9 +212.0 +72.88 34.65
| 1809 1073 3.2436 613 -1424.8 23.3 1.23 1525.0 +218.7 +75.20 35.47
| 1836 1062 3.3195 601 -1491.6 24.2 1.26 1593.4 +225.6 +77.57 36.30
| 1863 1052 3.3962 589 -1560.6 25.0 1.28 1663.9 +232.6 +79.98 37.14
| 1890 1042 3.4735 578 -1631.8 25.9 1.31 1736.6 +239.8 +82.43 37.99
| 1917 1032 3.5516 568 -1705.4 26.7 1.33 1811.7 +247.0 +84.93 38.84
| 1944 1023 3.6305 557 -1781.3 27.6 1.36 1889.1 +254.4 +87.48 39.70
| 1969 1015 3.7042 549 -1853.6 28.4 1.38 1962.9 +261.4 +89.87 40.51
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: steve123</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Have None</div><div class="ubbcode-body">300 Norma
26.0 BBL
1.9 Twist Broughton
220 Sierra Match
OAL; 3.463 to 3.502
Powder; Ramshot Magnum 85.2 to 90.8gr
Primer; WLRMP
300 Norma
240 Sierra Match
3.436 OAL
Powder; N-560 80 to 81gr
Primer; Fed 215M
300 Norma
240 Sierra Match
3.436 OAL
Powder; H 1000 81.5 to 81.7gr
Primer; Fed 215M
240 Sierra Match
3.436 OAL
Powder; Ramshot Magnum 82.4 to 86.9gr
Primer; WLRMP
Reamers can be found, Dave Kiff ( PT&G )
</div></div>
C'mon man! We need the velocities too!
Here's 240 SMK info
Tabular trajectory data at Std.ICAO Atmosphere
-------------------------------------------------------------------------------------
Gun / Ammunition : .300 Norma Mag
Bullet : .308, 240, Sierra HPBT LR MatchK 9245
Bullet weight : 240 grains or 15.55 Grams
Muzzle velocity : 2829 fps
Crosswind speed : 1 Mph
Ballistic Coefficient(s) (G1):
C1=0.699@V>2150 fps;
C2=0.690@V>1800 fps;
C3=0.673@V>0 fps;
Optimum trajectory information :
Optimum sight-in range (X) = 202 Yds.
with max. ordinate above LOS at range (M)= 122 Yds.
and max. point blank range (P)= 234 Yds.
-------------------------------------------------------------------------------------
Sight-in clicks, 1 click = 1.0 cm/100 m or 0.394 in/100 m
Height of sight above bore axis = 5.0 cm or 1.969 inch
Gun is zeroed-in at 200 yds,
by sighting-in at level firing
-------------------------------------------------------------------------------------
Range Velo Time of Energy Path Deflection Total Sight correction Target
city flight to at crosswind drop for setting new lead
LOS of 1.0 Mph zero range 33 fps
-------------------------------------------------------------------------------------
·Yards fps s ft.lbs. in. in. MOA in. Clicks MOA yds ·
-------------------------------------------------------------------------------------
| 0 2829 0.0000 4265 -2.0 0.0 ----- 0.0 ------ ----- 0.00
| 27 2793 0.0289 4157 -0.6 0.0 0.02 0.2 +6.2 +2.14 0.32
| 54 2757 0.0583 4052 +0.4 0.0 0.03 0.6 -2.2 -0.76 0.64
| 81 2722 0.0880 3948 +1.1 0.0 0.04 1.5 -3.9 -1.33 0.96
| 108 2687 0.1181 3847 +1.5 0.1 0.06 2.6 -3.8 -1.31 1.29
M 122 2669 0.1339 3795 +1.5 0.1 0.06 3.4 -3.5 -1.20 1.46
| 135 2652 0.1486 3748 +1.5 0.1 0.07 4.2 -3.1 -1.05 1.62
| 162 2618 0.1794 3651 +1.1 0.1 0.08 6.1 -1.9 -0.66 1.96
| 189 2583 0.2106 3556 +0.4 0.2 0.09 8.3 -0.6 -0.20 2.30
X 200 2569 0.2234 3518 0.0 0.2 0.09 9.3 0.0 0.00 2.44
| 216 2549 0.2421 3463 -0.7 0.2 0.10 10.9 +0.9 +0.31 2.65
P 232 2529 0.2609 3409 -1.5 0.3 0.11 12.7 +1.8 +0.63 2.85
| 243 2515 0.2739 3372 -2.2 0.3 0.11 13.9 +2.5 +0.85 3.00
| 270 2482 0.3060 3282 -4.0 0.3 0.12 17.3 +4.1 +1.42 3.35
| 297 2449 0.3385 3195 -6.3 0.4 0.13 21.1 +5.9 +2.02 3.70
| 324 2415 0.3716 3109 -9.0 0.5 0.15 25.3 +7.7 +2.64 4.06
| 351 2383 0.4053 3025 -12.1 0.6 0.16 30.0 +9.6 +3.29 4.43
| 378 2350 0.4395 2943 -15.7 0.7 0.17 35.1 +11.5 +3.97 4.81
| 405 2318 0.4743 2863 -19.8 0.8 0.19 40.7 +13.6 +4.66 5.19
| 432 2286 0.5096 2785 -24.3 0.9 0.20 46.8 +15.6 +5.38 5.57
| 459 2254 0.5455 2708 -29.4 1.0 0.22 53.3 +17.8 +6.11 5.97
| 486 2223 0.5819 2633 -34.9 1.2 0.23 60.4 +20.0 +6.86 6.36
| 513 2191 0.6188 2559 -41.0 1.3 0.24 68.0 +22.2 +7.63 6.77
| 540 2160 0.6561 2487 -47.6 1.5 0.26 76.1 +24.5 +8.41 7.18
| 567 2129 0.6939 2416 -54.7 1.6 0.27 84.7 +26.8 +9.21 7.59
| 594 2098 0.7323 2346 -62.3 1.8 0.29 93.9 +29.1 +10.02 8.01
| 621 2068 0.7710 2278 -70.5 2.0 0.30 103.6 +31.5 +10.85 8.43
| 648 2037 0.8103 2212 -79.3 2.2 0.32 113.9 +34.0 +11.68 8.86
| 675 2007 0.8499 2146 -88.6 2.4 0.33 124.8 +36.5 +12.53 9.29
| 702 1977 0.8897 2083 -98.4 2.6 0.35 136.1 +38.9 +13.38 9.73
| 729 1947 0.9303 2020 -108.9 2.8 0.36 148.1 +41.5 +14.26 10.17
| 756 1918 0.9719 1959 -120.1 3.0 0.38 160.8 +44.1 +15.17 10.63
| 783 1888 1.0143 1900 -132.1 3.2 0.40 174.4 +46.9 +16.11 11.09
| 810 1860 1.0577 1843 -144.9 3.5 0.41 188.7 +49.7 +17.08 11.57
| 837 1831 1.1019 1787 -158.5 3.8 0.43 203.8 +52.6 +18.09 12.05
| 864 1803 1.1470 1733 -173.0 4.1 0.45 219.8 +55.6 +19.12 12.54
| 891 1775 1.1928 1679 -188.2 4.4 0.47 236.6 +58.7 +20.17 13.04
| 918 1747 1.2394 1626 -204.3 4.7 0.49 254.2 +61.8 +21.25 13.55
| 945 1719 1.2867 1575 -221.3 5.0 0.51 272.7 +65.0 +22.36 14.07
| 972 1692 1.3348 1525 -239.1 5.4 0.53 292.0 +68.3 +23.49 14.60
| 999 1665 1.3836 1477 -257.8 5.7 0.55 312.3 +71.7 +24.64 15.13
| 1026 1638 1.4330 1430 -277.4 6.1 0.57 333.4 +75.1 +25.82 15.67
| 1053 1612 1.4831 1384 -297.9 6.5 0.58 355.4 +78.6 +27.02 16.22
| 1080 1586 1.5338 1340 -319.3 6.8 0.60 378.3 +82.1 +28.23 16.77
| 1107 1560 1.5852 1296 -341.6 7.2 0.62 402.2 +85.7 +29.47 17.34
| 1134 1534 1.6371 1254 -364.8 7.6 0.64 426.9 +89.4 +30.72 17.90
| 1161 1509 1.6896 1213 -389.0 8.1 0.66 452.6 +93.0 +31.99 18.48
| 1188 1485 1.7428 1174 -414.2 8.5 0.68 479.3 +96.8 +33.29 19.06
| 1215 1460 1.7973 1136 -440.8 9.0 0.70 507.4 +100.8 +34.64 19.66
| 1242 1437 1.8531 1100 -468.8 9.4 0.73 537.0 +104.8 +36.04 20.27
| 1269 1414 1.9100 1065 -498.2 9.9 0.75 567.9 +109.0 +37.49 20.89
| 1296 1391 1.9681 1032 -529.1 10.5 0.77 600.3 +113.4 +38.98 21.52
| 1323 1370 2.0271 999 -561.3 11.0 0.79 634.1 +117.8 +40.51 22.17
| 1350 1348 2.0870 969 -595.0 11.5 0.82 669.3 +122.4 +42.08 22.82
| 1377 1327 2.1478 939 -630.1 12.1 0.84 705.9 +127.1 +43.69 23.49
| 1404 1307 2.2094 910 -666.5 12.7 0.86 743.8 +131.8 +45.33 24.16
| 1431 1287 2.2718 883 -704.4 13.3 0.89 783.2 +136.7 +47.00 24.84
| 1458 1267 2.3348 856 -743.6 13.9 0.91 824.0 +141.6 +48.70 25.53
| 1485 1249 2.3991 831 -784.7 14.5 0.93 866.6 +146.8 +50.46 26.24
| 1512 1230 2.4643 807 -827.4 15.2 0.96 910.8 +152.0 +52.25 26.95
| 1539 1213 2.5306 784 -872.1 15.8 0.98 957.0 +157.4 +54.10 27.68
| 1566 1196 2.5980 762 -918.6 16.5 1.01 1005.1 +162.9 +56.01 28.41
| 1593 1180 2.6663 742 -966.9 17.2 1.03 1054.9 +168.6 +57.96 29.16
| 1620 1164 2.7354 722 -1017.1 17.9 1.06 1106.6 +174.4 +59.95 29.91
| 1647 1149 2.8053 704 -1069.1 18.6 1.08 1160.2 +180.3 +61.98 30.68
| 1674 1135 2.8763 687 -1123.2 19.4 1.11 1215.8 +186.3 +64.07 31.46
| 1701 1121 2.9480 670 -1179.3 20.1 1.13 1273.4 +192.5 +66.19 32.24
| 1728 1108 3.0207 655 -1237.5 20.9 1.16 1333.1 +198.9 +68.37 33.03
| 1755 1096 3.0942 640 -1297.8 21.7 1.18 1394.9 +205.4 +70.60 33.84
| 1782 1084 3.1685 626 -1360.2 22.5 1.21 1458.9 +212.0 +72.88 34.65
| 1809 1073 3.2436 613 -1424.8 23.3 1.23 1525.0 +218.7 +75.20 35.47
| 1836 1062 3.3195 601 -1491.6 24.2 1.26 1593.4 +225.6 +77.57 36.30
| 1863 1052 3.3962 589 -1560.6 25.0 1.28 1663.9 +232.6 +79.98 37.14
| 1890 1042 3.4735 578 -1631.8 25.9 1.31 1736.6 +239.8 +82.43 37.99
| 1917 1032 3.5516 568 -1705.4 26.7 1.33 1811.7 +247.0 +84.93 38.84
| 1944 1023 3.6305 557 -1781.3 27.6 1.36 1889.1 +254.4 +87.48 39.70
| 1969 1015 3.7042 549 -1853.6 28.4 1.38 1962.9 +261.4 +89.87 40.51
Re: 300 NORMA MAG ?
BLUEJAZZ
Received a few pieces today. Shoulder angle appears to be 20 degrees.
BLUEJAZZ
Received a few pieces today. Shoulder angle appears to be 20 degrees.
Re: 300 NORMA MAG ?
For any of you guys who want a barrel and have an AI 338 Lap Mag call AINA and ask for a 300 Norma barrel. I have the reamer here ready to go to work. Good round BTW.
For any of you guys who want a barrel and have an AI 338 Lap Mag call AINA and ask for a 300 Norma barrel. I have the reamer here ready to go to work. Good round BTW.
Re: 300 NORMA MAG ?
What shell holder is needed for the 300 Norma?
What shell holder is needed for the 300 Norma?
Re: 300 NORMA MAG ?
Thanks Bluejazz.
Thanks Bluejazz.
Re: 300 NORMA MAG ?
How is the accuracy compare to the tried and trued 300win?
How is the accuracy compare to the tried and trued 300win?
