• 1 WEEK LEFT: This Target Haunts Me Contest

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

308 components

Re: 308 components

.308 win:
Powder=Varget (44.0 grains)
Primers CCI Large Rifle (BR-2)
Bullets 175 gr Sierra Match king.

.243 Win:
Powder Reloader25
Federal Gold Medal (GM210M)
Bullets 115 grain DTAC, moly or boron nitride.

James
 
Re: 308 components

thanks Jasmck, to the other asshole, your input was greatly appreciated. I cant stand people like you, all i wanted to know was an honest answer and not some bullshit. But again thanks Jasmck
 
Re: 308 components

Mostly RL15 and IMR4064 for the 168s
little Varget

I get better V out of RL-15, needed in the 20" & 21" barrels. I've also had some issues with warm loads living in WI and shooting them in the TX summer, especially with FGMM brass when the primer pocket gets questionable. Rl-15 is a double-base powder, Varget single.

Nosler CC 168s (cheaper short-range loads)
Sierra 175SMK
Mostly Hornady 178AMAX
3 1:10 barrels, one 1:12
The lapua 155s are probably a better choice at range, I have'nt switched over to them...yet

GM210M primer
little CCBR2 in the past

FGMM reuse and Win Brass

Pretty basic and popular components.
 
Re: 308 components

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 427Cobra</div><div class="ubbcode-body">What to use is the easy part, where to find it is the hard part, did someone say Zebra? </div></div>I would say putting it together to make a winning combination is the hard part,too
laugh.gif