Range Report 6.5 cm 153 grain a-tips

[Landon4]

Just curious if anyone has put any of these down range and what you thought and how they performed, I just received a few boxes from copper creek ammo in lapua brass hopefully going to try them out this weekend

 

[Steel head]

I haven’t even seen them yet.
I will try them when I can.

 

[Speedarino]

any word on the a-tips

 

[John Glidewell]

https://www.snipershide.com/shootin...tips-in-6-5cm-yet.6950260/page-2#post-7845794

 

[Landon4]

I haven’t got to shoot any yet I had to leave for work I’ll be home in 2 weeks and will be able to get to the range then

 

[Bantam1]

After my load development with the 135 I was only able to shoot them at 600 to confirm my velocity. I show on steel and they were very consistent, but it's not exactly long range. I'll try to get out soon and shoot them from 1000-1400 to check BC and actual performance.

 

[65shootmoor]

https://www.snipershide.com/shootin...tips-in-6-5cm-yet.6950260/page-2#post-7845794

That's on the 135's, but should be relevant. The short of it is they're incredibly accurate, seem to like a lot of jump, more speed the better.

 

[John Glidewell]

The beginning of that thread has info on 153s and RL26, pushing them at 2780 roughly. So it has info for both Atips in 6.5.

 

[65shootmoor]

The beginning of that thread has info on 153s and RL26, pushing them at 2780 roughly. So it has info for both Atips in 6.5.

Ah, forgot about that part.

 

[hacabrera071]

Following!