Re: 6.5 Grendel barrel there's not on left on earth!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DIESEL758</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: WildBill3/75</div><div class="ubbcode-body">I'd avoid Precision Firearms and Mark like the plague. Unless of course you want to deal with a narsasistic personality that does spotty work and lies to you, then by all means go ahead. </div></div>
Holy crap there has been quite of few people that have been saying that lately, I don't know if it is because of the move or lack of returning phone calls and emails but I have never had a problem with him. </div></div>
What happend to me June-Aug 2012,
I payed damn near $800 for a brand new diamond fluted lilja with matching bolt(way over priced I know I just really wanted the barrel and didn't want to wait on satern)....he sent me a regular fluted lilja that had gas block set screw marks, a giant surface scratch on it, and copper in the barrel...gets better. He improperly attached the barrel extension so when I mounted it in my upper the barrel canted hard to the right side. He also installed the barrel extension with a roll pin instead of the usual regular solid pin.
Phone conversations were ridiculous..When I told him he sent me the wrong barrel he tells me that he doesn't do diamond fluting any more and didn't know who accepted an order for one(when he was the one who turned me on to the idea of a diamond flute, and weeks after the whole incident I see posts on the internet with him offering the option...). I'm easy going and don't care if it is regular fluting so I say I am fine with the one he sent me I just wanted to be refunded the diffrence.I also asked him if he test fires his barrels before he sends them off, he says not they are all new. Then I tell him that I cleaned copper out of the barrel he sent me and he says OH YEAH I test fired 1 out of a few...sure. When I tell him about the cant in the barrel he makes me sound like I'm an idiot and can't mount a barrel and there is no way that he fucked up installing the barrel extension. I end up sending him my whole upper. It ended up being the barrel extension....in the process he sends it back without my BCG and charging handle. I then had to harass him to find the BCG/charging handle which took him over a week to find.
The barrel shoots around 1/2MOA with factory hornady 123 amax's which I'm happy with but all the bad with my dealing with Mark makes that my 1st and last experiance with Precision Firearms in MD.