• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

6mm Creedmoor Berger 105 hybrid load data

NCSWATSNIPER

Private
Minuteman
Aug 2, 2020
18
4
Tried searching but couldn’t find anything. Does anybody have the max load data from the Berger book using 105 hybrid target bullets with H4350. I’m getting ready to start a load development with this combo and need the book recommendation for a max load. Thanks.
 
The Berger reloading manual doesn't have a 6mm Creedmoor data.

I looked at a Sierra page and it shows 42.1 grain of H4350 with the 107 grain bullet. This sounds reasonable. I looked at some other notes I made and I went up to 41.4 grain of H4350 with the Berger 105 grain Hybrid.
 
I started around 40.5 if I remember correctly, but was able to get to 43grs. My node seems to be in the 41.8-42.2 range
 
I take the approach of a min safe load instead of a max load when starting load development. All barrels are different...some much faster than others. Also, be advised, you can expect 6cm to speed up 100-150fps within the first 150rds and then settle.

40gr is a good starting point for 105/H4350.

My current load is 41.2gr doing 3120fps
 
Also, 42.2 of StaBall 6.5 gives me 3067, same hole with little SD and ES. Worth a shot.
Hey, I saw where you were using staball looking through threads on 6creed. How's that going for you? I might end up switching to 4350 for my 6.5cm and trying the staball for my 6creed. Thanks