7mm SAMU Load Data Needed

[DadEO]

7mm SAUM Load Data Needed
Does any one have any load data they are willing to share on 7mm SAUM?
I want to shoot the 180 Bergers because of the higher BC. If I cant then I would probably go to the 162 Amax.
My barrel is 25” with 8.7 twist

Any help and or advice would be appreciated

 

[FCS]

Re: 7mm SAMU Load Data Needed

How much freebore do you have to work with?

 

[Skyking]

Re: 7mm SAMU Load Data Needed

Try H1000 and Retumbo. Here is a good start.

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2926609#Post2926609

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2839238&page=1

 

[DadEO]

Re: 7mm SAMU Load Data Needed

Thanks Skyking!! I must have missed that one. Lots of good info.

 

[SIE107]

Re: 7mm SAMU Load Data Needed

http://forum.accurateshooter.com/index.php/topic,3775772.0.html

If the link doesn't work, go to AccruateShooter.com and look under the "Big Stuff" section, there is a thread for loads just for the 7mm RSAUM.

 

[Wild_Bill]

Re: 7mm SAMU Load Data Needed

Hi i have shot out 4 barrels in F Class and you should use H1000,
PM what your loaded length is to the lands and i will hook you up.
Are you using Rem or Norma cases norma cases must have the loads reduced 1gr to get the same performance and CCI250 primers have been the best performers for me. I have also used H4831SC it is good for the 162's but a bit hot for th eheavier projectiles and with a 25" barrel Retumbo will be a bit slow and give you problems with uniform pressures and burn out of the barrel.

 

[DadEO]

Re: 7mm SAMU Load Data Needed

Sorry it took so long to get back. Free bore is .188

 

[head2h2o]

Re: 7mm SAMU Load Data Needed

tag