1600 yard work today getting after it before the ID dmr elr match next month
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Offer valid until 9/23! If you have an annual subscription on Sniper's Hide, subscribe below and you'll be refunded the difference.
SubscribeThat Cadex got some sexy going on!!1600 yard work today getting after it before the ID dmr elr match next month
View attachment 8395911
You talking about the ATX? I have probably over 10k rounds through my AW and MC and have never had a single magazine issue. Not saying that it's impossible for them to have any issues. But to drill into your rifle to use a way inferior magazine is asinine.there is a whole thread of dudes having to mess with their feed lips to get them to run right, others had issued with plastic axsr base plates breaking. Personally I had issues with a bad mag spring, and my follower was popping out past the feed lips. My only issue is with the conversion mags, I'm sure the double stack mags work well for their intended long action calibers.
That Cadex got some sexy going on!!
Axsr .308 conversion mags in particular.You talking about the ATX? I have probably over 10k rounds through my AW and MC and have never had a single magazine issue. Not saying that it's impossible for them to have any issues. But to drill into your rifle to use a way inferior magazine is asinine.
Pretty sure that is what all of mine look like... 0 failures with 308 and 6.5cmThis was my mag spring in that mag
View attachment 8395991
Was the import/export permits easy enough to sort out?Had a great trip to the US recently with a good mate. Took the AT-X in 6.5CM over, being so easy to get ammo for locally with MHSA.
Rocks and sand with Colorado Precision Rifle at the Blue Steel Ranch in NM, snow filled canyons in Colorado and finally farm fields in Missouri shooting NRL Hunter matches.
Caught up with a heap of excellent people, ate a shit load of brisket & burnt ends, drank a lot of Dr Pepper and made a heap of new mates. Love the USA.
View attachment 8396069
Pueblo, Colorado - NRL Hunter a couple of weeks back.
View attachment 8396064
Blue Steel Ranch, New Mexico... Shooting on MARS.
View attachment 8396066
Clarence, Missouri - NRL Hunter.
View attachment 8396067
Had a great trip to the US recently with a good mate. Took the AT-X in 6.5CM over, being so easy to get ammo for locally with MHSA.
Rocks and sand with Colorado Precision Rifle at the Blue Steel Ranch in NM, snow filled canyons in Colorado and finally farm fields in Missouri shooting NRL Hunter matches.
Caught up with a heap of excellent people, ate a shit load of brisket & burnt ends, drank a lot of Dr Pepper and made a heap of new mates. Love the USA.
View attachment 8396069
Pueblo, Colorado - NRL Hunter a couple of weeks back.
View attachment 8396064
Blue Steel Ranch, New Mexico... Shooting on MARS.
View attachment 8396066
Clarence, Missouri - NRL Hunter.
View attachment 8396067
the floor plate shouldn't be 90° to the followerPretty sure that is what all of mine look like... 0 failures with 308 and 6.5cm
View attachment 8396061
Nice. Hope you can tell your friends US is not what the internet says. It is always a Brit or Aussie runs with a snarky “gun violence” comment In every discussion online.Had a great trip to the US recently with a good mate. Took the AT-X in 6.5CM over, being so easy to get ammo for locally with MHSA.
Rocks and sand with Colorado Precision Rifle at the Blue Steel Ranch in NM, snow filled canyons in Colorado and finally farm fields in Missouri shooting NRL Hunter matches.
Caught up with a heap of excellent people, ate a shit load of brisket & burnt ends, drank a lot of Dr Pepper and made a heap of new mates. Love the USA.
View attachment 8396069
Pueblo, Colorado - NRL Hunter a couple of weeks back.
View attachment 8396064
Blue Steel Ranch, New Mexico... Shooting on MARS.
View attachment 8396066
Clarence, Missouri - NRL Hunter.
View attachment 8396067
Same here - The 0 failures partPretty sure that is what all of mine look like... 0 failures with 308 and 6.5cm
View attachment 8396061
The lips to hold the rounds in are in the back, the back of the case are also larger and heavier. You want the pressure to be higher in the back to be able to move all those rounds and hold them with enough pressure to sit tight on the mag lips.To vh20 ,I think to avoid nose dive .
View attachment 8396453
Refurbishment project done, for now
Spec;
- Bergara HMR Wilderness in 308w
- Leupold Mk5 HD 3,6-18 Illum TMR
- Vortex PMR Rings
- Accuracy International 1.5 Legacy AICS Chassis
- Trigger Tech Special 2 stage
- Svemko Hunter Short suppressor
- Cole-tac suppressor cover
Angry fella, its still an Accuracy International product, hens it fits into this «Accuracy International picture thread» threadGet that POS Remington 700 wanna be out of that AI thread.... Smdh almost as bad as ole @BurtG "awm"
Angry fella, its still an Accuracy International product, hens it fits into this «Accuracy International picture thread» thread
"Spec;Angry fella, its still an Accuracy International product, hens it fits into this «Accuracy International picture thread» thread
sorry to disappoint you husky guy, its just a picture…We have lots of threads for non ai's which is where this "clone" belongs LoL
Typical non-AI owner thinking a non-AI rifle rates to be in an AI picture thread.View attachment 8396453
Refurbishment project done, for now
Spec;
- Bergara HMR Wilderness in 308w
- Leupold Mk5 HD 3,6-18 Illum TMR
- Vortex PMR Rings
- Accuracy International 1.5 Legacy AICS Chassis
- Trigger Tech Special 2 stage
- Svemko Hunter Short suppressor
- Cole-tac suppressor cover
I will just crawl back into my hole…Typical non-AI owner thinking a non-AI rifle rates to be in an AI picture thread.
View attachment 8396580
To vh20 ,I think to avoid nose dive .
The spring is attached to the rear of the follower. It doesn’t matter what you do to the rest of the spring or floor plate, or what angle it makes when fully extended. It can only apply pressure to the follower at the single point it is attached (the rear)The lips to hold the rounds in are in the back, the back of the case are also larger and heavier. You want the pressure to be higher in the back to be able to move all those rounds and hold them with enough pressure to sit tight on the mag lips.
Also pressure to front does little.... if you load 1 round in your mag only the middle to back make contact with the round do to a cases design.
More pictures please!I had the pleasure of attending the 2024 International Best Sniper Competition as a spectator. The Irish did not disappoint. I got about three dozen photos, but this was one of the best. They told me that they're all original, right down the barrel, and that they run about 1000 rounds a year through them. Other images show that they are 1993 AWs. Scopes are the S&B Ultra Performance 6-36x. I didn't have a chance to see what reticle they were running.
View attachment 8396652
Also, finally got the thumbhole stock on the AT308. I'm on the fence about the mounting solution for the EFLX though, and might go with a Leupold Low Mount + SPUHR Wilcox Rail (Diving Board).
View attachment 8396653
Just some good photos worth sharing. If you guys want more photos of the AWs from the Irish, I'll share them. I just need to finish editing/color correcting them.
Why the viper-skins?Another beautiful day on MCBQ R4 with the AX-ELR 50BMG and it's half brother AE-MK l 260Rem
View attachment 8396759View attachment 8396760
3777fps out of a .50?? What the hell are you loading?Another beautiful day on MCBQ R4 with the AX-ELR 50BMG and it's half brother AE-MK l 260Rem
View attachment 8396759View attachment 8396760
Cheap, available, and I'm too lazy to rattle canWhy the viper-skins?
No one responded to this https://www.snipershide.com/shootin...nse-510-cal-327-gr-hvcqb-projectiles.7212483/ so it gave me a reason to buy QuickLoad. Chrono only picked up one shot, the other two may have come apart after leaving the muzzle, I'll back it down a little and try again.3777fps out of a .50?? What the hell are you loading?
My Dad is just getting into reloading .50BMG and we're not far from Quantico, I might be PM'ing you before long...Cheap, available, and I'm too lazy to rattle can
No one responded to this https://www.snipershide.com/shootin...nse-510-cal-327-gr-hvcqb-projectiles.7212483/ so it gave me a reason to buy QuickLoad. Chrono only picked up one shot, the other two may have come apart after leaving the muzzle, I'll back it down a little and try again.
View attachment 8397186
I had the pleasure of attending the 2024 International Best Sniper Competition as a spectator. The Irish did not disappoint. I got about three dozen photos, but this was one of the best. They told me that they're all original, right down the barrel, and that they run about 1000 rounds a year through them. Other images show that they are 1993 AWs. Scopes are the S&B Ultra Performance 6-36x. I didn't have a chance to see what reticle they were running.
View attachment 8396652
Also, finally got the thumbhole stock on the AT308. I'm on the fence about the mounting solution for the EFLX though, and might go with a Leupold Low Mount + SPUHR Wilcox Rail (Diving Board).
View attachment 8396653
Just some good photos worth sharing. If you guys want more photos of the AWs from the Irish Army, I'll share them. I just need to finish editing/color correcting them. UPDATE: Adding more edited photos below:
View attachment 8397235
View attachment 8397236
View attachment 8397237
View attachment 8397238
View attachment 8397240
Another beautiful day on MCBQ R4 with the AX-ELR 50BMG and it's half brother AE-MK l 260Rem
View attachment 8396759View attachment 8396760
Got to ask, are you sure that’s an AE MK1 with a 10 round magazine? MK1’s only had 5 rounders if I am not confused. I would love to be corrected.
Na axsrs brand new are 11...Is $12k too much for a brand new unfired AW in .308 with a 24" barrel?
Only if no one is willing to pay that much.Is $12k too much for a brand new unfired AW in .308 with a 24" barrel? Green folding with rail and butt spike.
I really can't decide if OD or Sage green is the ultimate AI colour...I had the pleasure of attending the 2024 International Best Sniper Competition as a spectator. The Irish did not disappoint. I got about three dozen photos, but this was one of the best. They told me that they're all original, right down the barrel, and that they run about 1000 rounds a year through them. Other images show that they are 1993 AWs. Scopes are the S&B Ultra Performance 6-36x. I didn't have a chance to see what reticle they were running.
View attachment 8396652
Also, finally got the thumbhole stock on the AT308. I'm on the fence about the mounting solution for the EFLX though, and might go with a Leupold Low Mount + SPUHR Wilcox Rail (Diving Board).
View attachment 8396653
Just some good photos worth sharing. If you guys want more photos of the AWs from the Irish Army, I'll share them. I just need to finish editing/color correcting them. UPDATE: Adding more edited photos below:
View attachment 8397235
View attachment 8397236
View attachment 8397237
View attachment 8397238
View attachment 8397240
If I could have an AT308 with all its modern feartures that looked exactly like an AW, with classic AW folding thumbhole skin and in its proper OD Green, that would be the best of both worlds for me. I'll always feel the OD Green is a better color than the Sage Green. But, the Sage is a better color for the field.I really can't decide if OD or Sage green is the ultimate AI colour...