It's good to have options. The AX buttstock is obviously great, but at $1000 it's an expensive upgrade for someone with an AT. This will give the option to replace just the buttstock frame and keep the factory AI hinge; only downside on an AT would be that it would still fold to the non-bolt side. And if someone has a fixed AT or wants the buttstock to fold over the bolt, then a full Vision assembly with a Vision hinge would be available.
This is all I want in life. A gold TT Diamond 2 stage for my AI
Have you had any issues with the extractor on the tl3? Mine took some work to get running right
I want this buttstock on my AXSR & ATX…. With a folding hinge. Sayyyyy maybe you should be making us folding hinges.
If one is going to you, who is the other lucky person? I know it ain’t me lol, I don’t get anythingThere are only 5 in existence, 2 are in route to the US, and 1 is NC bound.
I guess the AO forend is a little longer than the AT and AX, doesn't look like you could go any shorter on the barrel.
Do you know what fps you are getting from that bbl?
Oh yea, it's definitely longer which was by design and a good thing.
I haven't the foggiest. I literally shot less than 9 rounds down it since I got chopped and didn't have the lab radar out.
The Obsession chassis was designed for 16.5" and longer.
Never served but I have one patiently waiting in the safe for the stock to come in so I'll let you know lol.Are you the one guy that actually liked the USMC Unertl on their M40A1?
Hey, I prefer an action that’s limited to 10 rounds and won’t reliably feed BR based cartridges.
Non factory magazine. Said magazine won’t feed 10+ Dasher. Lots of spacer kits and other BS needed for most people.
I’m just bitter because I tried BRA and it wouldn’t feed worth a shit.
You didn't give them feed lips enough love, homey. You got to talk sweet to 'em.
You couldn't buy these fuckers off me.As long as nothing happens to your two magic mags
Damn that is sexy.
Excuse my ignorance but sounds like it'll be available as a complete chassis but also has individual components?
I get that the AO forend exists already and the butt is what you are working on, will the pistol grip section also be available?
Keen to see how it performs.
Lots of guys post their badass short barrel 308s but never mention performance.
Appreciate it's probably not impressive but interested nonetheless.
If you are looking for the unicorn among Accuracy internationals
Have look at Holts Auctions lot no 4124.
Have look at Holts Auctions lot no 4124.
Not sure what I'm missing here.
-----------------
VERBERGER 6mm PCC BOLT-ACTION TARGET RIFLE, serial no. 5611, 22 3/8in. unsighted nitro barrel, fitted with 29mm scope rings, 14in. custom stock (including recoil pad), together with RCBS F L Die Set 6mm PCC
------------------
Figured it out, I think. It's a different auction. Try: https://auctions.holtsauctioneers.c...alelot=A0322+++1152+&refno=++175762&saletype=
What cartridge you shooting?
I'm thinking a 16" 308 with the same ASE SL5 suppressor would be as close as you can get to a "practical" hunting setup on an AI.
Pictured is a 20” .308 however with the longer 16” AXMC forend. Do you have an AX or AT?
I have 4 barrels across two AI’s. 26” 6.5 creedmoor, 20” .308 for range work. Then a 18” 6.5CM & 16” .308 used for hunting.
I do have an SL5i and SL7i-BL (pictured). However both are heavy beasts if keeping down the weight & or length for hunting. Might want to consider a lighter weight suppressor for hunting…. However if you taking the same set up on the range for some abuse the SL5 is a great shout.
I did think that forend looksonger than normal.
Im a soon to be owner of an AT.
Planning to run a 26" 6.5CM for range/competition use and will get a short 308 for hunting and subsonics (for fun on the range).
I've got a couple of ASE cans, while heavy I inevitably end up using all my rifles in some form of competitive shooting so not sure about the longevity of an aluminum hunting suppressor.
I know plenty of guys do use them in competitions but I feel like the ASE cans will be a better long term.
I'll going so short on the barrel means you need a muzzle forward suppressor and the Sl5i is by far the shortest muzzle forward suppressor I know of that is rated for 308.
There are some shorter ally cans I know of but not sure they'd do too well on a fire breathing short 308.
Getting a little tripod/ bag practice in today. Shot the best I've ever shot in a center fire match yesterday down at Fort Carson. My BRA ran flawlessly and gave zero issues. I think this fancy TT made me shoot better too 
Still can't get over how stable this AO chassis is on props and what not
Still can't get over how stable this AO chassis is on props and what not
Getting a little tripod/ bag practice in today. Shot the best I've ever shot in a center fire match yesterday down at Fort Carson. My BRA ran flawlessly and gave zero issues. I think this fancy TT made me shoot better too
Still can't get over how stable this AO chassis is on props and what not
View attachment 7826912
Accuracy International AT-X AICS balances pretty damn good, beware of cheap imitations
6 weights up front hardly constitutes as a good balance.Accuracy International AT-X AICS balances pretty damn good, beware of cheap imitations
The "cheap imitation" can actually meet deadlines and make it to market and can fold. So there's that 
Still wanna run an ATX tho and compare the AO to that. Not that I would ever sell my rifle to get an ATX.
Still wanna run an ATX tho and compare the AO to that. Not that I would ever sell my rifle to get an ATX.
Your not very smart are you........what part of balancing on a 1" pine board is not good balance
Familydude
Spending my kids’ paltry inheritance on hobbies
Supporter
Full Member
Minuteman
Supporter
Are we talking chassis, or rifle? What “cheap” chassis are you referring to? Are you comparing your AI chassis to the several others available in an R700 footprint, since your action appears to be that? MPA, MDT, etc, etc?
The post above mine is mocking a guys take on how well his AI balances. I'm mocking his cheap imitation. And all the whiners
Not to mention my AT-X AICS balances pretty damn good.
failing to see any cheap imitations any where around here but go off champ
How about a cheap imitation balancing on a piece of half inch board? Does that not make it twice as good?
Last edited:
Familydude
Spending my kids’ paltry inheritance on hobbies
Supporter
Full Member
Minuteman
Supporter
You’re mocking a guy’s very, very expensive and custom AI, calling it a cheap imitation while using an R700 clone in an AI chassis. Nothing wrong with the R700 in that chassis but, in this instance, it really waters down your argument. But hey, I’m just another dude on the internet.The post above mine is mocking a guys take on how well his AI balances. I'm mocking his cheap imitation. And all the whiners
Not to mention my AT-X AICS balances pretty damn good.
