Yeah the mount on the Spuhr is what I was looking for. Cheers!
If they aren’t going to share the shorty rails, Hacksaws are always in stock at HD/Lowes (or Ace if you’re a serial killer).
That’s my plan anyways
View attachment 7840394
If they aren’t going to share the shorty rails, Hacksaws are always in stock at HD/Lowes (or Ace if you’re a serial killer).
That’s my plan anyways
Whoa whoa whoa, Ace is the place…..with actual old guys who know what you are talking about when you say “I need a bolt with 8mmx1.25 threads” the children at Home Depot and Lowe’s didn’t even know what
WD-40 was so I asked for “lubricants” and the kid at HD looked me in the eyes and walked off to get help, never to return and the Lowe’s kid paged a manager who was a tranny.
View attachment 7840394
If they aren’t going to share the shorty rails, Hacksaws are always in stock at HD/Lowes (or Ace if you’re a serial killer).
That’s my plan anyways
If serious though, at least send it to me & let me clean up your hack-job on the lathe... Or I can mill it so you don't have any open slots on the end, not sure if that would be an issue or not.
J ham just Became the official machinist of the AI thread
Son of bitch... All the real machinists are reading this, thinking back to when they were hobbyists & just laughing their asses off at me, haha!
Took the masking tape special out for some vermin control on the farm. Hitting corvids out to 610m in decent wind is massively satisfying with 143eldx.
I was wondering thanks deersniper
I’m going to shoot my AI this weekend. I need it. I’ve had a year from hell and I need some trigger time.
6CM and 300 Norma are in order. How awesome to have a rifle that can do multi cal in one session
thanks deersniperI’m going to shoot my AI this weekend. I need it. I’ve had a year from hell and I need some trigger time.
6CM and 300 Norma are in order. How awesome to have a rifle that can do multi cal in one session
Finally picking my AT-X up from my smiths tomorrow. Had a couple barrels spun up and a custom make up job. She gonna be ready to party finally. 
The jagged MLOK edge will act in the same way a NC Star breaching standoff brake does on a shotty….duh.
I’m sad you don’t think my DIY job on my miter saw and a dremel won’t cut it for the gram. I’ll use my hand drill to pop a few holes for the RRS ARC system while I’m at it. $400 arts and crafts projects are the way.
Ace is absolutely the place to go for hardware. Home Depot and Lowes are absolutely filled with fuckin retards. HD > Lowes …but both are terrible.
What it feels like when I’m at HD/Lowes:
(Or at a public range and the RO starts to hover
)
Welp. Posting up the AI on gunbroker. Kinda wanna see how awesome the okie special is. Here's the link to it if anyone is interested. Wanted to give you folks first dibs.
Gunbroker Auction AIAX AO
Gunbroker Auction AIAX AO
Why not bothNot even gonna fall for that shit. It’s either rock roll or a picture of a giant dick.
Familydude
Spending my kids’ paltry inheritance on hobbies
Supporter
Full Member
Minuteman
Supporter
@MDT_Josh @MDT_OFFICIAL when's the lightweight AI chassis dropping?
But you watched the whole clip right?I actually clicked it
Ticked over 10k rounds on the action yesterday, still looks pristine in every way.
Fuck me. Hangover headache from Jameson Black barrel then I get Rick Rolled…. Might as well go fill up my truck for the trifecta today.
These 1100 ftlbs get hungry! Yes still Super Duty, feels so nice getting a half tank of Diesel.
Hey guys I’m looking for a little friendly gun guy advice if possible. Using new brass vs same lot 1x fired brass I am getting flat primers on the 1x fired with the same load as the new brass. Why would 1x fired be flat and new isn’t with the same formula? Anyone know why that is?
Just the facts ma’am:
- AI ASR
-6mm Creedmoor. (The Lord’s round)
-24 inch Proof CF barrel suppressed
-60 degrees F & 2500 FASL
-brass is Lapua SRP all the same lot.
-both new and 1x fired were sized using the same Whidden bushing die.
-105 Berger hybrid
-seated to 2.795 COAL
- charge is 40.00 of RL16 all the same lot and same bottle loaded at the same time.
- CCI 450 primer
-rounds fired the same day all in succession. 1x was fired first. I fired 10 to test speed vs my new brass speed.
-all brass new and 1x fired trimmed to 1.915
-new brass is 3030 FPS and 6 SD
-1x fired brass is 3047 FPS and 9 SD
-accuracy was identical
Photo = new brass on the right. 1x (now 2x fired) on the left.
Just the facts ma’am:
- AI ASR
-6mm Creedmoor. (The Lord’s round)
-24 inch Proof CF barrel suppressed
-60 degrees F & 2500 FASL
-brass is Lapua SRP all the same lot.
-both new and 1x fired were sized using the same Whidden bushing die.
-105 Berger hybrid
-seated to 2.795 COAL
- charge is 40.00 of RL16 all the same lot and same bottle loaded at the same time.
- CCI 450 primer
-rounds fired the same day all in succession. 1x was fired first. I fired 10 to test speed vs my new brass speed.
-all brass new and 1x fired trimmed to 1.915
-new brass is 3030 FPS and 6 SD
-1x fired brass is 3047 FPS and 9 SD
-accuracy was identical
Photo = new brass on the right. 1x (now 2x fired) on the left.
Last edited:
I should have clarified, how much bump are you resizing?
MDT_OFFICIAL
Official Account of Modular Driven Technologies
Supporter
Commercial Supporter
Full Member
Minuteman
Wait you want a light one or a replacement for the AT-X stock with our ACC Chassis? Very big distinction here!
- Josh
