Accuracy International - Thumbhole Grip Upgrade Kit
The Accuracy International thumb hole grip upgrade kits are available in fixed or folding and includes a thumbhole backstrap, rear end mouldings, and screws. For AT, will also fit AW and AWM. Fits new style stocksides only.
www.sportingservices.co.uk
Happy Easter
Some people were told they don't ship to the US when they called. I ordered a 3 or 4 months ago and had no problem. Came in about 2 weeks.
Just caught this on my computer, was looking at before from my phone.
I see what you've done here.. you introduced some Elite Sand magic with the magazine! No wonder it's feeding.
I see what you've done here.. you introduced some Elite Sand magic with the magazine! No wonder it's feeding.
And every Tom, Dick and Harry has been finger fu*king it... It's going to get marked up some.
The rubber does develop white looking powder on it. Which in this case could have been mixed with dirt from being on the display shelf.
White stuff on my new ATX, cropped from yesterdays range trip.
The rubber does develop white looking powder on it. Which in this case could have been mixed with dirt from being on the display shelf.
White stuff on my new ATX, cropped from yesterdays range trip.
I ordered online. Got mine in a little under 2 weeks as well. They definitely ship to the US, if the order is placed online.
Ken
Working on a 750gr A-Max load for the AX ELR
Man if they ever just let you buy one as a .375CT I would probably get one. I don’t want the .50 parts since I would hardly use them. But that is a shmexy rifle.
EDIT: Does your LabRadar work with that much vertical offset?! If so I need to try that with mine, I keep it at ground level and get more error messages than I’d like due to the muzzle brake gasses.
EDIT: Does your LabRadar work with that much vertical offset?! If so I need to try that with mine, I keep it at ground level and get more error messages than I’d like due to the muzzle brake gasses.
I use a Piet recoil trigger with that offset, picks up every shot and no errors after adjusting trigger sensitivity to 3.
Inertia trigger on Labradar is the way to go.
No perfectly aiming, or issues with microphone picking up. Just point at target and shoot.
No perfectly aiming, or issues with microphone picking up. Just point at target and shoot.
Another recoil trigger user here. No dropped shots and I also use trigger sensitivity level 3.
Too easy
Too easy
Saturday was the worst possible rain to shoot in. Wind, rain, and fog. 1150 yard targets completely obscured. Did manage to get 2 impacts at 1260.
Also, you can order a 25ft 3mm cable and plug into the trigger.
Log velocity while practicing off barricade.
Log velocity while practicing off barricade.
Shot a match Saturday with the AX/AO. Placed 11/29. Pierced one primer during sight in but I think it was due to excessive head spacing on some 1x fired brass I had bought. Other than that one hiccup it was flawless.
Back in the backOf a Cadillac
Number one with a bullet, I'm a power pack
Yes, I'm in a bang
With a gang
They've got to catch me if they want me to hang
'Cause I'm back on the track
And I'm beatin' the flack
Consider yourself educated lol
I could see you using it as a podcast roll in intro beat lol
Okay…not to derail the thread any further buttttt
For my new AT, if I was looking at a 4-16x42 ATACR, the 7-35, or a 5-25PM2 which would you go with?
For my new AT, if I was looking at a 4-16x42 ATACR, the 7-35, or a 5-25PM2 which would you go with?
Um Alex that would be , what is a ZCO 527
If you are happy with low magnification, the only correct answer is the s&b 3-12x50 pmii. That scope is magical.
Honestly it's reticle choice. Pick your reticle then go.
I own the 4-16 and the 7-35. The 4-16 is nice for a short distance setup or gas guns, but I am partial to the 7-35 for longer range stuff even though I vary rarely get above 15 for any actual shooting.
It's about the perfect scope for a shorter barrel AI. Recently got rid of mine since I'm going with longer barrel setups. The 3-12x50 PMII punches well above it's weight.
I commented on your ATACR thread with my AT/NF combo. 4-16X42. But I’ll be more specific
This gun is primarily used as a hunting gun. Crop damage to be exact. It’s on a 308 20” barrel. Primary use being shooting deer inside 500 yards. It’s perfect for that and 4X is useful for close range in low light
My AXMC wears a 7-35 ATACR. I haven’t had a chance to hunt with that yet.
That said I have been left wanting more magnification to ID deer (antlers) at the 400+ yard ranges. As what I shoot needs to be does.
I have used many other higher mag scopes like Athlon Cronus BTR 4.5-29 and deem this a good magnification range for all around shooting
So moral of my story is I like 4X on low end for low light and being this is a primary hunting rifle it works out very well. If I was hunting longer ranges or target shooting 800+ yards I’d opt for the 7-35. I rarely shoot my higher power scopes near max magnification. I will when load testing or identifying at long ranges
Keep in mind there’s a decent size difference between the two. If that matters to you. I’ve posted the pic before but here’s the two in comparison for size. The AX is about 12” behind the AT in this pic. Low profile/locking elevation turret on the 4-16 is nice as well for my application
There’s been a decent amount of ZCO in the PX as well. $3700-$3800 compared to $2800-$2900 many ATACR go for
Um Alex that would be , what is a Tangent Theta 5-25x56!
This is super helpful. I like the 4-16, but I think I’m gonna want more magnification. 5-25 or 7-35 seem to be the ideal range.
A lot of people who use both say the 7-35 has the best glass. I haven’t used the 5-25 so I can’t compare. If you think you use the magnification then get it. Can always turn it down
Mlok hand guard for my AX arrived early today.
So it’s cold outside, the shed is all looked up, I’m afraid of the dark and various other excuses for me not going out and checking myself but can anyone confirm or deny if AX and AXMC barrels are interchangeable between actions?
Picked up the AXMC very recently with a short action 308 bolt kit. So I’m wondering if my AX 6.5 barrel will work with it. Meh if not but it would be handy to know.
Failing an answer I’ll check tomorrow lol.
Picked up the AXMC very recently with a short action 308 bolt kit. So I’m wondering if my AX 6.5 barrel will work with it. Meh if not but it would be handy to know.
Failing an answer I’ll check tomorrow lol.
Attachments
They make 6.5 for the AXMC. I’ve been waiting on a 2018 profile one for mine. Picked one up here from a member as well for mine.
The 6.5 barrels for AX/AT are a dime a dozen in the px here. AXMC in the win tac are harder to come by
