Did you happen to try the 168gr of the same Federal Gold Match? That is the recipe for my 308. I can't find a more accurate round.Attempted to try several different factory loads at 100yrs.
- Best 10rd grouping (upper left) was with 175gr Fed Gold Medal Match (BTHP)
View attachment 8101135
View attachment 8101136
View attachment 8101276
Sierra 155 gr Palma #2156 works well in .308 10 twist. No recoil. It constantly hammers out to 1200 yards. Gonna be doing load development for Sierra 169 gr soon.
View attachment 8101277
^^ 47 gr of Varget
View attachment 8101278
^^ 47 gr of TAC
I'm lazy to run the numbers what's that dope at 1k?View attachment 8101420View attachment 8101421
Pre fit AI 26” 10 twist
Using .308 small rifle primer cases
cci 450 small magnum primers
View attachment 8101420View attachment 8101421
Pre fit AI 26” 10 twist
Using .308 small rifle primer cases
cci 450 small magnum primers
Is this Racine rifle range in WI?View attachment 8101393
View attachment 8101405
My 6BR AT. this is my first rifle to ever achieved 1/4 MOA 5 shot group at 100 yards. I ve been enjoy shooting the small rocks at 550 yards berm and see them launching into the air lol. She likes 105 berger hybrid with 30.6 gr Varget.
Lol sure looks like it doesn’t it!Is this Racine rifle range in WI?
yepIs this Racine rifle range in WI?
Awesome! I’m a Milwaukee native, and been a member at RCLRC for like 7 or 8 years. Are you planning on shooting any of the WPRC club matches in the area?
For a sec I thought you were rocking a 1970s headband à la The Royal Tenenbaums.
It thought this as well and was actually a little disappointed when I realized it wasn’t.For a sec I thought you were rocking a 1970s headband à la The Royal Tenenbaums.
View attachment 8101895
View attachment 8101896
Me too! Damnit that would've be so Chad. Or so based. Or something.It thought this as well and was actually a little disappointed when I realized it wasn’t.
absolutely. I've been interested in Columnbus PRS match.Awesome! I’m a Milwaukee native, and been a member at RCLRC for like 7 or 8 years. Are you planning on shooting any of the WPRC club matches in the area?
Winter's coming... Just sayin'.View attachment 8102050
Beat 8 other Tac shooters last weekend at MKM.
Also F the wind and F the snow. I've had enough of this winter BS.
View attachment 8102050
Beat 8 other Tac shooters last weekend at MKM.
Also F the wind and F the snow. I've had enough of this winter BS.
next well find out he used 168 FGM ....witchcraft i say!!!!!!AT for the win!
Mind blown. Can you tell us how you won a comp without a lower bore axis, barricade stop & arca rail???
All you do is shoot as mediocre as you always do, and let everyone else suck more.AT for the win!
Mind blown. Can you tell us how you won a comp without a lower bore axis, barricade stop & arca rail???
168g A-Max......next well find out he used 168 FGM ....witchcraft i say!!!!!!
That a standard AI Barrel? What MV you getting out of them?168g A-Max......
For a sec I thought you were rocking a 1970s headband à la The Royal Tenenbaums.
View attachment 8101895
View attachment 8101896
Bartlein 1/10 twist. My load is 45.2g of Shooters World Precision and its at 2710fps at 60°F. Runs around 2677 at 30°F which it definitely was last weekend.That a standard AI Barrel? What MV you getting out of them?
I'm using 178gr Hornady BTHP at the moment. Was going to drop too 175gr SMKs but might drop to 168s instead.
Could you ring that steel water tank in the distance.First day out with the AXSR, thanks @MOUNTIC , the doggo approves
View attachment 8099349View attachment 8099352
View attachment 8099355View attachment 8099356
It's a mile away so probably, but then I'm not sure I'd be welcomed back after that.Could you ring that steel water tank in the distance.
Ah nice. I'm running AI Barrel with Factory Ammo so getting nothing like those MVsBartlein 1/10 twist. My load is 45.2g of Shooters World Precision and its at 2710fps at 60°F. Runs around 2677 at 30°F which it definitely was last weekend.
I drive a car that looks like this:
View attachment 8085981
(13 years old, 185k miles)
So I can drive a rifle that looks like this:
View attachment 8085977
I really need to take an updated version of that pic now that I have a 338 LM barrel and a PVS27
Typical AI guys, like my buddy says... we AI dudes got barrels bolts suppressors for each day of the week for our rifle .View attachment 8104191
Decided to do an inventory because I reached into my ammo stash and pulled out a 20" 338LM barrel that I completely forgot I even had.
Apparently I have a pattern when buying barrels: A shorty and a long boi.
Two by two, hands of blue...
26" 308
16" 308
26" 300WM
20" 300WM
27" 338LM
20" 338LM
26" 6.5CM
24" 6.5CM (which I bought because the lead time on the 26" barrel was supposed to be 5 weeks and 4 months later I hadn't gotten it)
and now I know I need more SR brakes
Makes me wish I never got rid of my HSRCView attachment 8104557
View attachment 8104562
New Proof Carbon 20" 300wm barrel arrived from Front Range Precision, Deadair Nomad L Raw is about to get a rude awakening.
What possessed you in doing such act ?I sold my off too , but I kept atleast one .Makes me wish I never got rid of my HSRC
I never said I was a smart man Jen-Nay.What possessed you in doing such act ?I sold my off too , but I kept atleast one .
Nice setup and hits at that range!2200 Yards 300NM
Just testing 230A-Tip
7 out of 10 Hits.
Hell of a range!2200 Yards 300NM
Just testing 230A-Tip
7 out of 10 Hits.
How many of those barrels do you actually use?View attachment 8104191
Decided to do an inventory because I reached into my ammo stash and pulled out a 20" 338LM barrel that I completely forgot I even had.
Apparently I have a pattern when buying barrels: A shorty and a long boi.
Two by two, hands of blue...
26" 308
16" 308
26" 300WM
20" 300WM
27" 338LM
20" 338LM
26" 6.5CM
24" 6.5CM (which I bought because the lead time on the 26" barrel was supposed to be 5 weeks and 4 months later I hadn't gotten it)
and now I know I need more SR brakes