Where did you get your cheek pad and ARCA rail? Thanks
I had a flat rail on forend , 20 moa stock rail on action.
Was getting wonky poi/poa with my xii so I Dremel down a full size 20 moa rail for the clip on.
Currently running stock action rail , 1.5” scope mount , cut down forend 20moa rail. 1.3” center xii
Previous set up with zero moa rail :
Can’t find a pic with the new rail with clip on on
Been using other things for night time interdiction
Last edited:
The arca rail i sourced from forums, googled the RRS model name and found a listing on ar15 forums, signed up, messaged the guy and was lucky it was still available.
The cheek pad i got from sporting services i think
It's going to depend how sensitive your clipon is to angular misalignment. My PVS 30 is perfectly happy riding on a standard section of pic rail, and a PVS 27 should be similar. Thermals may be more sensitive.
Thanks!
I haven’t gone down the clip on route yet. Planning for future ideas as I set up this rifle piece by piece
A friend of mine is absolutely amazed after shooting my AW in 308. He thinks about getting an AT. What are your thoughts comparing those two? What are the main differences? I know about the quick change barrel and another trigger. Anything more? Are they comparable by any means?
Never handled an AT, not sure what to tell him...
To me personally the AW is the holy grail after owning her for a few months. Rest of my rifles stays in the safe since then and even sold most of them recently.
Cheers
Never handled an AT, not sure what to tell him...
To me personally the AW is the holy grail after owning her for a few months. Rest of my rifles stays in the safe since then and even sold most of them recently.
Cheers
Basically the same gun besides the quick change barrel and new skins
I prefer the at night vision bridge to the aw as well... no way I would take an aw vs an at personally
IYKYK 
Took the TBAC out to Range 4 for a 1,000yd day; heading OCONUS so I won't be shooting for a while. Winds were at 10-15 mph. What's unique is the range is in a bowl so the 10mph at range level is tame considering the real wind at ground level (above us) was 20-25mph, which is unusual for us here in NoVA.
Started the session shooting my 600yrd steel to check velocity / true. After I shot my first string (just under the red stripe), I let the firing line shoot my steel (you'd think I'd know better by now).
ETA - Chow time.
Took the TBAC out to Range 4 for a 1,000yd day; heading OCONUS so I won't be shooting for a while. Winds were at 10-15 mph. What's unique is the range is in a bowl so the 10mph at range level is tame considering the real wind at ground level (above us) was 20-25mph, which is unusual for us here in NoVA.
Started the session shooting my 600yrd steel to check velocity / true. After I shot my first string (just under the red stripe), I let the firing line shoot my steel (you'd think I'd know better by now).
ETA - Chow time.
Last edited:
I was getting schooled by the wind on MCBQ R4 with the AE Mk l in 260R. Good training and turned out to be a beautiful day.
AT-X with 6.5CM Carbon Fiber Bartlein 24" Bbl and 6CM PVA 26" Bbl (installed).
S&B PMII 5-25 H59, Vortex Impact 4000, Sig SRD 7.62Ti.
Thanks @WillHugh for talking me into another expensive toy
S&B PMII 5-25 H59, Vortex Impact 4000, Sig SRD 7.62Ti.
Thanks @WillHugh for talking me into another expensive toy
Attachments
I'm jonesin for one of those impacts...AT-X with 6.5CM Carbon Fiber Bartlein 24" Bbl and 6CM PVA 26" Bbl (installed).
S&B PMII 5-25 H59, Vortex Impact 4000, Sig SRD 7.62Ti.
Thanks @WillHugh for talking me into another expensive toy
How much does it weigh with the 24” Carbon Fiber BartlienAT-X with 6.5CM Carbon Fiber Bartlein 24" Bbl and 6CM PVA 26" Bbl (installed).
S&B PMII 5-25 H59, Vortex Impact 4000, Sig SRD 7.62Ti.
Thanks @WillHugh for talking me into another expensive toy
With the 6mm 26” MTU barrel and everything pictured, it is 22.2lbs. I think it was about 19lbs when I weighed it with the carbon barrel on it before adding the Impact 4000.
We are really liking them! Trued the GB data to match existing Kestrel 5700 data and it seems to be spot on.
Somebody needs to develop a telescopic barrel so we could just run those puppies in and out of the forend…
Do you even shoot that gun? Hornady hasn’t used that box in like 5+ years j/k hahah
The foam has a cutout for one box of ammo, I think you know the answer to your question
Did you sell your AT?
Always sad to see such rifles collecting dust. Rifles are made to shoot, you can put them on the wall after 30 barrels. Others are desperately searching for those and have to pay ridicolous prices to be able to shoot one. Each to their own though....The foam has a cutout for one box of ammo, I think you know the answer to your question
Cheers
Yeah. Pulled the optic and dumped it for $2500 on here a couple weeks ago. Sold pretty quick
Just a joke!
I’ll never sell the AT. It’s the holy grail of AI’s. The ATX fate has yet to be determined down the road.
It does have a nice feel to it though. The centerline of the rifle is similar to my other AT. Just with a chassis. I wanted a feel similar to what I have vs the taller/blocky feeling my AX had.
If I don’t like it I’ll sell the ATX chassis and get a takeoff AT thumbhole folder for this to
Edit: if I ever do go back to the AX platform I’d put a thumbhole on it like @Huskydriver did. That rifle was sick!!
I shed a tear just writing I sold that rifle! There’s not many rifles I legit would never part with but that AT is one I won’t. Everything I wanted over all my years shooting is that rifle.
I wanted another rifle for target shooting. Something I can run year round as a fuck around rifle while my green AT is working crop damage shifts in the farm fields.
Trigger on this ATX is phenomenal though I give it that for sure
Good one, for a moment i had a tear in my eye for not seeing that add in the trade section
Alright, i will tell my buddy to get one. Seems legit
Already caught myself thinking about an AT aswell to take pressure from my AW. Had 1000 rounds within 4 months
Too bad they dont offer the AT in 300winmag.
Cheers
Alright, i will tell my buddy to get one. Seems legit
Already caught myself thinking about an AT aswell to take pressure from my AW. Had 1000 rounds within 4 months
Too bad they dont offer the AT in 300winmag.
Cheers
Last missing piece of the puzzle with the addition of the BT57-QK monopod. Was stressful cutting into that cerakoted thumbhole stock but end result is perfect !
Will also(mostly) work as a much needed bagrider
Will also(mostly) work as a much needed bagrider
Finally cleaned a PRS Skills Stage. Slow I know but I feel so much more stable now using the Vision Chassis.
HeAvY BoLt LiFt WiLl NeVeR wIn A mAtCh…
@Steelcityprecision 1 Day Team Match. Format was hike to blind holding area, self stage brief in blind holding area, move to stage, find, range and engage with 6 min par time. Rinse and Repeat. Covered about 4 miles in 5hrs over six stages.
@Steelcityprecision 1 Day Team Match. Format was hike to blind holding area, self stage brief in blind holding area, move to stage, find, range and engage with 6 min par time. Rinse and Repeat. Covered about 4 miles in 5hrs over six stages.
Last edited:
Hi Team,
A couple of months ago I posted about my Accuracy international Coopermatch which I was planning on converting from single shot to magazine fed and looking for a Chassis to drop it into. J-Ham absolutely pulled though, being an absolute legend and posting his AT chassis from the land of the free to the land of haggis and whisky (one big favour still outstanding).
Its just been finished (magazine well milled out and new bedding screw holes) by Jack at JR firearms so I thought I would take the opportunity to give credit to those who made this possible. Thank you J-Ham, Jack and EOD100
I'll post another photo when she's fully dressed.
Jack
A couple of months ago I posted about my Accuracy international Coopermatch which I was planning on converting from single shot to magazine fed and looking for a Chassis to drop it into. J-Ham absolutely pulled though, being an absolute legend and posting his AT chassis from the land of the free to the land of haggis and whisky (one big favour still outstanding).
Its just been finished (magazine well milled out and new bedding screw holes) by Jack at JR firearms so I thought I would take the opportunity to give credit to those who made this possible. Thank you J-Ham, Jack and EOD100
I'll post another photo when she's fully dressed.
Jack
Good deal my dude... I'm glad it worked out & I hope you're happy with the end result. 
Our local PRS club has 3 AI's in it. All AT-X's. All 3 were in the top 5 of the match.
Decided to take the AT out looking for Mule deer
What is the extra dial on top of the elevation turret? I have a 7-35 ATACR, but neither mine nor any of the others I've seen have that.
MIL version. It’s locking.
I saw the On <->Off markings and wondered. I wasn't aware there was a military-specific version. Any other differences? Also, other than in the military itself, are those available anywhere?
They're available if you buy the rifle. Come as part of the mk22 package.
Ah. Are there any other differences you know of?
I'm not sure what the difference are besides the locking turret.
