Nope, just standard 11rd......
Day started with @Mr. F like this....
View attachment 7284245
Fortunately turned into this...
View attachment 7284246
6.5cm hawkhill Hammering at 600 sub minute of thumb with 147 eldms
View attachment 7284247
View attachment 7284248
Gentlemen, I have to give a shout out to Mr. Stoner from Hoptic USA. I ordered a 2 round holder and when the holder was received it had the wrong hardware. No worries, so I sent an email to Mr. Stoner and he contact me the same day (within 1hr actually). He then sent new hardware, a prepaid return envelope, and some swag. In addition to what Mr. Stoner sent was an American flag for the AIAX in the battle flag section of his website store. I thought this was an awesome gesture and really does not cost him much at all, but still super cool none the less.
Now I am a lefty (Mr. Stoner wouldn't have known anyway) and it wouldn't work on my rifle. I would like to send it to whomever would like it so they can put it on their AIAX. PM me your address and Ill send it USPS to you on Monday. Just a way to pay it forward.
Poor coyote. Now the deer and varmints are going to take over.
The battle flags are a nice touch.Gentlemen, I have to give a shout out to Mr. Stoner from Hoptic USA. I ordered a 2 round holder and when the holder was received it had the wrong hardware. No worries, so I sent an email to Mr. Stoner and he contact me the same day (within 1hr actually). He then sent new hardware, a prepaid return envelope, and some swag. In addition to what Mr. Stoner sent was an American flag for the AIAX in the battle flag section of his website store. I thought this was an awesome gesture and really does not cost him much at all, but still super cool none the less.
Now I am a lefty (Mr. Stoner wouldn't have known anyway) and it wouldn't work on my rifle. I would like to send it to whomever would like it so they can put it on their AIAX. PM me your address and Ill send it USPS to you on Monday. Just a way to pay it forward.
This is where I hope to be one day. Ax vudoo and a legit ax ??? the envy is realThe battle flags are a nice touch.
View attachment 7284598
Competing over at the New Zealand Mountain Challenge a couple of weeks ago with the AX308 in 6.5CM. Amazing scenery, excellent people!View attachment 7285442
Very nice! @96C Is that a Proof Research drop-in AI AX Carbon Fiber barrel with Area 419 Sidewinder muzzle brake?Competing over at the New Zealand Mountain Challenge a couple of weeks ago with the AX308 in 6.5CM. Amazing scenery, excellent people!View attachment 7285442
What is the long extension for the quicker?
Don't worry about prefit barrels as long as it's from a reputable source. If you're doing standard calibers like 6.5 creed, Mile High and EuroOptic have the real specs and the real Cerakote colors to get you a "factory" barrel. Any other shop can turn a good AI barrel, I use Long Rifles Inc, personally.I’m looking to take the plunge into getting an AIAX.
For replacement barrels, should I be at all concerned about buying prefits for AI? Like the Win Tac, Proof, etc? Some people swear you should get smiths to perfectly match it to your action, but I don’t know enough to answer that.
Also, first world problems, but any thoughts on color? Trying to decide between Pale Brown and Dark Earth. I haven’t seen in person, just online. Pale Brown looks like a lighter tan, Dark Earth looks like a darker brown? With a black scope I don’t think it will matter, but what would match/coordinate better if I went with a Razor Gen II? My wife won’t like hearing I’m spending more time (and money) trying to coordinate the look of a rifle more that my actual wardrobe...
But sage green isnt ... "Elite." If it were, it would have in it's name like my elite sand does. (Said while looking down my nose.)Don't worry about prefit barrels as long as it's from a reputable source. If you're doing standard calibers like 6.5 creed, Mile High and EuroOptic have the real specs and the real Cerakote colors to get you a "factory" barrel. Any other shop can turn a good AI barrel, I use Long Rifles Inc, personally.
As for color, where are you located geographically and will you hunt with it? I've never liked Pale Brown, I don't really care for the color but it makes no sense to me in the grass/woodlands of WI where I live. If you live in the desert it would make more sense. Dark Earth and Sage Green will blend in with more environments IMO, but I can't imagine why anyone would choose anything other than Sage Green. It's scientifically proven to be the best
I’m looking to take the plunge into getting an AIAX.
For replacement barrels, should I be at all concerned about buying prefits for AI? Like the Win Tac, Proof, etc? Some people swear you should get smiths to perfectly match it to your action, but I don’t know enough to answer that.
Also, first world problems, but any thoughts on color? Trying to decide between Pale Brown and Dark Earth. I haven’t seen in person, just online. Pale Brown looks like a lighter tan, Dark Earth looks like a darker brown? With a black scope I don’t think it will matter, but what would match/coordinate better if I went with a Razor Gen II? My wife won’t like hearing I’m spending more time (and money) trying to coordinate the look of a rifle more that my actual wardrobe...
That's an interesting trigger shoe. And a very nice looking rifle ;-)
Thanks for the compliment! The straight trigger shoe is factory AI. It's made for the comp trigger, but works with the standard one as well. I had the 4302 left over from another setup, so I just used it on this rig so it would fit into the transit case. I had an ERA-TAC mount on it originally but that was too tall for the foam cutout.That's an interesting trigger shoe. And a very nice looking rifle ;-)
@MACHTECH If I may ask, what made you go for the Spuhr SP-4302 3MIL over the SP-4602 6MIL?
So, rustoleum satin nutmeg isn't available in Aus, fancy that. Anyone got a close colour match for spray paint for any of the other AI colours (besides black obviously)?
Awesome, cheers mate, I'll take a look nowDuraCoat sell DIY aerosol kits in most firearm related colours. It'll hold up better than hardware store spay paint.
Very nice! @96C Is that a Proof Research drop-in AI AX Carbon Fiber barrel with Area 419 Sidewinder muzzle brake?
22mph wind, 1921m, 6.5CM, 1 metre steel gong...View attachment 7289158... Not going so well
Thanks for the advice, ya’ll! Obviously I want the most accurate color I do have a questions. Trying to figure out the color in these two pictures. On the upper picture I would assume the top rifle is pale brown and bottom is dark earth? However, on the bottom picture Mile High said the color is dark earth.
On the top picture what I assume is dark earth looks dark brown, on the bottom more yellow/coyote. Is it the lighting? Am I off on the correct color on that upper picture? Did the colors change on newer models? View attachment 7289703
Thanks for the advice, ya’ll! Obviously I want the most accurate color I do have a questions. Trying to figure out the color in these two pictures. On the upper picture I would assume the top rifle is pale brown and bottom is dark earth? However, on the bottom picture Mile High said the color is dark earth.
On the top picture what I assume is dark earth looks dark brown, on the bottom more yellow/coyote. Is it the lighting? Am I off on the correct color on that upper picture? Did the colors change on newer models? View attachment 7289703
Pale Brown Master Race FTW.
I’m looking to take the plunge into getting an AIAX.
For replacement barrels, should I be at all concerned about buying prefits for AI? Like the Win Tac, Proof, etc? Some people swear you should get smiths to perfectly match it to your action, but I don’t know enough to answer that.
Also, first world problems, but any thoughts on color? Trying to decide between Pale Brown and Dark Earth. I haven’t seen in person, just online. Pale Brown looks like a lighter tan, Dark Earth looks like a darker brown? With a black scope I don’t think it will matter, but what would match/coordinate better if I went with a Razor Gen II? My wife won’t like hearing I’m spending more time (and money) trying to coordinate the look of a rifle more that my actual wardrobe...
I like your stylehard to find photos of AI's with anything other than ATACR's OR PMII's
here is a razor on a PB
View attachment 7289782
While not an AI here is my razor on my custom switch lu700 in AIAX Chassis. It's cerakoted Coyote Tan. It's just a tad less "pink" than PB.
View attachment 7289783
The razor would look weird on DE. It's a much deeper brown/red than PB
As far as deciphering colors. PB always has a tan butt pad and black rear pistol
Grip. DE has solid color pistol grip and Black butt pad.
hard to find photos of AI's with anything other than ATACR's OR PMII's
here is a razor on a PB
View attachment 7289782
While not an AI here is my razor on my custom switch lu700 in AIAX Chassis. It's cerakoted Coyote Tan. It's just a tad less "pink" than PB.
View attachment 7289783
The razor would look weird on DE. It's a much deeper brown/red than PB
As far as deciphering colors. PB always has a tan butt pad and black rear pistol
Grip. DE has solid color pistol grip and Black butt pad.
Are you saying H-212 is a direct match for factory AI Dark Earth? Or that your rifle is cerakoted in H-212?Mine is the AI version of Dark Earth. Cerakote shade is H-212, Federal Brown.
I was about to tag you in that post.Are you saying H-212 is a direct match for factory AI Dark Earth? Or that your rifle is cerakoted in H-212?
Got any pics?
Are you saying H-212 is a direct match for factory AI Dark Earth? Or that your rifle is cerakoted in H-212?
Got any pics?
Only way to do it is to remove the barrel and look inside the action from the front while you tighten and loosen the QuickLoc screw.Just ordered a Pale Brown AIAX Demo from Eurooptic. Thanks for the all the advice! I’ve been checking this thread out for the past 2 years and have learned a lot of info from you guys.
The only thing that’s ever concerned me is I’ve heard some have to torque it past spec recommendations. Sounds like @samb300 might have discovered it was an issue with the epoxy. Is there a good way to check movement of the Quickloc without removing the action from the stock?
If anyone has any advice or tips for an AI newbie feel free to share.
Just ordered a Pale Brown AIAX Demo from Eurooptic. Thanks for the all the advice! I’ve been checking this thread out for the past 2 years and have learned a lot of info from you guys.
The only thing that’s ever concerned me is I’ve heard some have to torque it past spec recommendations. Sounds like @samb300 might have discovered it was an issue with the epoxy. Is there a good way to check movement of the Quickloc without removing the action from the stock?
If anyone has any advice or tips for an AI newbie feel free to share.