The best color is green.
Sadly mine is the inferior FDE. may have to break out the krylon and rectify the situation.
Sadly mine is the inferior FDE. may have to break out the krylon and rectify the situation.
Last edited:
I believe the technical term is “dried toothpaste”@M4guru @deersniper They did away with the master race color...sage green.
I with you on that...the blue is just too loud for me. Dark Earth just fits it better IMONot really digging the “Smurf Dick Blue”
Gonna stick with the Lord’s AI color: Dark Earth.
All of 7K for the short action, which really limits caliber choices....but in terms of a PRS style rifle the SA makes sense. I went to AI for the opposite listed above. The ability to shoot LA and SA in the same rifle. I could see myself getting the second gen at-x after they refine the first generation...update the bolt lugs like on the AXSR etcI believe the technical term is “dried toothpaste”
Elite Sand is bad ass though.
Yeah this thing is gonna be $7k set up, pre-glass. Blow right by that if you’re not set on 6.5CM. All the little widgets are gonna add up. All of us that have $70 thumb screws on ATs know the struggle.
Juice probably ain’t worth the squeeze for me but you never know. I'm more of a “what’s on the wall at Mile High today” impulse shopper.
That's how I do it. Tan cerakote and rattle can darks over it. If I want to change it, I wipe the rattle can off with acetone and start over. The cerakote never gets touchedI would definitely do the DE as well. Then I could cerakote a desert sand, OD Green, black flectarn right over it....
Nice looking stick, at first glance I thought it was an AT-X
That is a MPA mountNice looking stick, at first glance I thought it was an AT-X
What optics mount is that?
good luck getting DE parts from AI. All the have is pale brown and whatever, just no dark earth!I would definitely do the DE as well. Then I could cerakote a desert sand, OD Green, black flectarn right over it....
Yes sir, Custom Gun Coatings did a great job putting a red flectarn together for me awhile back.Fire engine red for the Fireman!
I would contact MIle HighDumb question. AX mags. Feeds 308 fine. 6.5cm and 6CM, not so much. Load five in a mag, first one feeds no issues. Second one, the bolt skips over it. I drop the mag or finger fuck it around while in the rifle, it’ll feed the second round and subsequent rounds fine. Feed lips need tweaked or what? It’s a factory 6CM AXSA.
I’ll run it down there in the next few days. Kinda annoying because I usually run 5 and then another 5 as it gives me a false sense of making it last. Running all 10, no issues. It’s annoying lolI would contact MIle High
That should’nt be an issue with factory offerings or mags.
I killed 3 barrels of 6creed without an issue through my AX
Just have one mag as I’m a poor. I’m gonna pick up another probably though when I go down thereAll mags do it?
I bought a AW mag used that doesn’t feed 100 percent and i compared it to my other mags and the lips are a hair off.
Shooting 6.5cm*
I almost guarantee I know what the issue is. You need to remove the spring and follower and push a socket down in the mag sideways. The mag body is too tight and the rounds don't stack quite right. Don't mess with the feed lips, I can almost guarantee they are fine. I had a mag do it that shipped with my rifle and I sent it back to AI a few times and they sent me a new mag each time but they kept doing it. I spent some time with mags I knew worked and studying the differences and finally figured it out. Worked great ever since.Dumb question. AX mags. Feeds 308 fine. 6.5cm and 6CM, not so much. Load five in a mag, first one feeds no issues. Second one, the bolt skips over it. I drop the mag or finger fuck it around while in the rifle, it’ll feed the second round and subsequent rounds fine. Feed lips need tweaked or what? It’s a factory 6CM AXSA.
@tevan0707 need to put in those sounds proof walls they put up on interstates within city limits...then shoot suppressed
Whick mag kit you running?Shot the 6BR with DOMINUS today, I’ll never shoot 6BR braked again.
View attachment 7543170
View attachment 7543171
Those look like Captain’s colorsYes sir, Custom Gun Coatings did a great job putting a red flectarn together for me awhile back.
HRD in AX mags with a WIN Tac barrelWhick mag kit you running?
HRD in AX mags with a WIN Tac barrel
Broke 1600 rounds on the barrel today, zero issuesHow are they working for ya?
I’ve ran my HRD’s for 3yrs through 2 dasher barrels, 2 BRA barrels, well over 8000rds without a single issueHow are they working for ya?
They’ve been sayin a 223 for 8yrsDid i hear right when lowlight had the ai crew on his youtube that they said there was 223 or 224 calibers on the way? Or is my mind wanting something thats not happening again.
You beat me to it. I bought one planning to do the same exact thing. The only thing slowing me down is the fact that the rail wasn't machined enough and doesn't seat fully as I'm sure you can tell by the 1/8" gap near the back. Really pisses me off as I will have to machine and dremel a bit to get a seamless interface. Did you chuck it up in a mill to clean up the face after the chop? Looks gorgeous by the way.View attachment 7544320View attachment 7544319
Area419 Arcalock rail mod, cut in half. Lower profile than the RRS, wider and flatter than the factory plastic grip, more stable than nothing... So far, this is my pick of the bunch.
You're right, it doesn't sit very well at the action end... There is quite a gap like you said.You beat me to it. I bought one planning to do the same exact thing. The only thing slowing me down is the fact that the rail wasn't machined enough and doesn't seat fully as I'm sure you can tell by the 1/8" gap near the back. Really pisses me off as I will have to machine and dremel a bit to get a seamless interface. Did you chuck it up in a mill to clean up the face after the chop? Looks gorgeous by the way.
It would be great if A419, or anyone for that matter, would just release one so we don’t have to drop $225 just to hack it into something that should cost $125.I'm definitely doing it.
You know what would be nicer right?It would be great if A419, or anyone for that matter, would just release one so we don’t have to drop $225 just to hack it into something that should cost $125.
Great idea!!!It would be great if A419, or anyone for that matter, would just release one so we don’t have to drop $225 just to hack it into something that should cost $125.
That’s funny, because I would think there would be more demand for a shorter version, like what RRS offers, than the long awkward angle full length rail that Area419 offersI asked them about doing a short version and was pretty much told there wasn't demand and that I should be excited about the long version. I waited till they went on sale and said f'it , I'm going to hack saw the thing. RRS makes one cheap but looks like a brick bolted on the thing and you lose the ergonomic angle for shooting offhand. Hopefully I can get around to cutting and fitting in the next couple weeks.