I just got a 7mmSTW in a 700 will I be able to get a AICS and just drop it in. Will the action screw right in?
Re: AICS Rifle Stocks
as long as your recoil lug is the same as a factory 700 lug. Otherwise you will have to mill the lug or the stocks lug recess. Other than that, its a drop it fit.
as long as your recoil lug is the same as a factory 700 lug. Otherwise you will have to mill the lug or the stocks lug recess. Other than that, its a drop it fit.
Re: AICS Rifle Stocks
the older chassis have an issue with the fit of a jewell trigger. 2 different ways to fix both require pulling metal off of something
the older chassis have an issue with the fit of a jewell trigger. 2 different ways to fix both require pulling metal off of something
Re: AICS Rifle Stocks
Pretty sure it'll drop in.
I'm not sure if the new X-mark triggers are different in size than the old style ones... but regardless you'll be wanting to change out the X-mark anyways(if you have an X-mark)
Pretty sure it'll drop in.
I'm not sure if the new X-mark triggers are different in size than the old style ones... but regardless you'll be wanting to change out the X-mark anyways(if you have an X-mark)
Re: AICS Rifle Stocks
I am sure it will fit, The Jewells have issue's in the stock, but I purchased a SPS tactical and AICS stock off another hide member and it seemed un modified the SPS tact had Xmark trigger, I swapped the SPS out for a XCR LR tactical with the 40X trigger and it fits fine.
I am sure it will fit, The Jewells have issue's in the stock, but I purchased a SPS tactical and AICS stock off another hide member and it seemed un modified the SPS tact had Xmark trigger, I swapped the SPS out for a XCR LR tactical with the 40X trigger and it fits fine.
Re: AICS Rifle Stocks
Look if you can afford an AICS, you can afford to make it fit. It may require 15 minutes of mill work.
Look if you can afford an AICS, you can afford to make it fit. It may require 15 minutes of mill work.
Re: AICS Rifle Stocks
you are correct
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AZPrecision</div><div class="ubbcode-body">Look if you can afford an AICS, you can afford to make it fit. It may require 15 minutes of mill work.</div></div>
you are correct
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AZPrecision</div><div class="ubbcode-body">Look if you can afford an AICS, you can afford to make it fit. It may require 15 minutes of mill work.</div></div>
Re: AICS Rifle Stocks
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AZPrecision</div><div class="ubbcode-body">It may require 15 minutes of mill work. </div></div>
Or 5 minutes of Dremel work (AKA hand Mill)
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AZPrecision</div><div class="ubbcode-body">It may require 15 minutes of mill work. </div></div>
Or 5 minutes of Dremel work (AKA hand Mill)
Similar threads
