I tried multiple searches to find the recommended torque spec for a Badger M5 on a McMillan, but only found one posts that recommended "53 in. pounds" and "60 in. pounds". Can someone assist? It's pillar bedded if that changes anything.
Gunsmithing Badger M5 Torque
- Thread starter Highground
- Start date
Re: Badger M5 Torque
53 to 55 inch pounds are all you'll need since its pillar bedded. 60 would also work. There is no magical torque #
53 to 55 inch pounds are all you'll need since its pillar bedded. 60 would also work. There is no magical torque #
Re: Badger M5 Torque
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wnroscoe</div><div class="ubbcode-body">53 to 55 inch pounds are all you'll need since its pillar bedded. 60 would also work. There is no magical torque # </div></div>
I agree, the only reason to have a specific torque is so you can repeat it if you have to take the action out of the stock and put it back without a change in zero.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wnroscoe</div><div class="ubbcode-body">53 to 55 inch pounds are all you'll need since its pillar bedded. 60 would also work. There is no magical torque # </div></div>
I agree, the only reason to have a specific torque is so you can repeat it if you have to take the action out of the stock and put it back without a change in zero.
Similar threads
