Gunsmithing CDI bm and older Savage 110--Update

Texgal_338

Sergeant
Full Member
Minuteman
Dec 21, 2005
186
32
north of Las Vegas
recently installed the CDI BM on my pre-accutrigger M110 Savage 300WM

here's where i had to mill the action




here's views of it inlet





here's a view of interior



feeds using a dummy on the workbench; waiting on a range day

Update
Took it to the range, worked great. No binding.
 

JCH

Gunny Sergeant
Full Member
Minuteman
Jun 10, 2008
2,769
113
Oklahoma City, OK
Re: CDI bm and older Savage 110

i wish my wife could do that.....

who am I kidding, I wish I could do that!
 

rcnpthfndr

Private
Full Member
Minuteman
Dec 3, 2005
59
10
54
East of the Cascades
Re: CDI bm and older Savage 110

TG338

whats the dimensions of those cuts? i have a couple 110 actions in the safe.

thanks

ETA: do you have Higher resolution pictures? if so could you email them to me? thanks again
 

Texgal_338

Sergeant
Full Member
Minuteman
Dec 21, 2005
186
32
north of Las Vegas
Re: CDI bm and older Savage 110

i just have a dial mic, not a digital; that said

cut the front pillar to .400" and the rear to .872"; didn't measure everything though.

had to trim the front screw to .745 and the rear to 1.555; this does NOT include the screw head
 

SDWhirlwind

Gunny Sergeant
Full Member
Minuteman
May 14, 2004
1,150
2
66
Re: CDI bm and older Savage 110

I congratulate you TG on your job and commend you for your desire and determination to tackle projects like this!!!

With that said though, damn woman you sure know how to denut and drain the testosterone from all the 10 thumbed guys that frequent this forum
wink.gif
90+% of them don't have the determination nor courage to tackle jobs like this.lol

You're like me as far as learning, always figured if it didn't kill me and cost less than a couple hundred bucks I was willing to try it once for sure
smile.gif