Gunsmithing CG x-treme Mod22 tactical trigger install question

Red Belly

Sergeant
Full Member
Minuteman
Jul 28, 2009
293
4
MA
I just installed a Mod 22 trigger into my Remington 700 action. The issue I am having is when I place the weapon onto safe it stops half way almost as if it is entering a detent. It only does this when it is cocked with the bolt closed. Otherwise the safety operates normally. It does this whether the action is set in the stock or not.

This is my first time installing a Mod22 trigger. I plan on calling Tom on Monday. Until then any thoughts?
 

Red Belly

Sergeant
Full Member
Minuteman
Jul 28, 2009
293
4
MA
I spoke with Tom before I purchased it. He said he adjusts the trigger & it would drop in. I installed rear pin, hooked rear of trigger onto the pin, installed front pin per Tom's instructions, which incidentally aren't in the instructions included with the trigger. If it wasn't Saturday night I'd be on the phone with him & probably have it up & running. The trigger functions perfectly except for the safety issue I am experiencing.
 

turbo54

Mr. 7mm
Full Member
Minuteman
Dec 10, 2010
4,999
14
41
Michigan
1365297544_zps80c7addc.jpg