converting 308 cases to .260 cases
- Thread starter Doc68
- Start date
No big deal.
-Lube case, run it through a FL .308Win die without the expander ball.
-Anneal case neck
-Run the case through a .260Rem die. (You can run it through a 7mm die first, to minimize any case losses)
-Neck turn
-Trim as necessary
Is it worth it? Depends on how much your time is worth and how hard it is to get correct 260Rem brass. Easier if you start with 7mm-08 or .243Win brass.. One step either way.
-Lube case, run it through a FL .308Win die without the expander ball.
-Anneal case neck
-Run the case through a .260Rem die. (You can run it through a 7mm die first, to minimize any case losses)
-Neck turn
-Trim as necessary
Is it worth it? Depends on how much your time is worth and how hard it is to get correct 260Rem brass. Easier if you start with 7mm-08 or .243Win brass.. One step either way.
This has been covered here again and again
http://www.snipershide.com/shooting...183093-260-remington-reloading-questions.html
The Snipers Hide advanced search function at the top right of this page may not find it for you, but Google can find it inside the Snipers Hide web site.
http://www.snipershide.com/shooting...183093-260-remington-reloading-questions.html
The Snipers Hide advanced search function at the top right of this page may not find it for you, but Google can find it inside the Snipers Hide web site.
