• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

Night Vision Custom USB power supply options for Thermal and NV

Here is @CoryT Vortex Impact 4000 power cord. Works like a Champ!!! If you are night hunting this baby is a Must.

y6QUu6h.jpeg
 
  • Like
Reactions: stefan73
Fischer split cable for DTNVS/E-COTI on a Nocturn Bat Pack, also available as a Lemo connector version. Split cable to power a EoTech Clip-IR/ Vortex 4000 LRF from USB. Lemo cable and battery adapter for the IR Patrol series. All plugs can be 90 degree or straight, voltage regulated if required for use with a USB pack . All Lemo, Fischer and DC type plugs are supported, as well as USB connections. Battery adapters and caps are 3D printed in engineering tough resins or Nylon.

IMG_1035.jpg
 
  • Like
Reactions: ST42
Hi Cory. I have a L3 PVS-14 (right eye) and a RH25 (left eye using the AC53) that I would like to run off an external battery pack. Would you be able to create a cable(s) for that? If so, could you let me know about how much that would cost?
 
I
Hi Cory. I have a L3 PVS-14 (right eye) and a RH25 (left eye using the AC53) that I would like to run off an external battery pack. Would you be able to create a cable(s) for that? If so, could you let me know about how much that would cost?
I can make a splitter system for that, though the PVS-14 runtime is such that it's hardly required. Message me with length you want to the split, then length to the pack. I'll also need the type of battery pack, a USB pack, AB Nightvision GOBP, Argus, L3, Nocturn Bat Pack, other. complete system will run about $450-500, RH25/USB cable only round $150
 
With the success of the COTI USB Battery Adapter (CUBA), we are adding options for other systems. The CUBA distribution will continue to be handled by SOK, and I will deliver the one-off custom solutions for other systems. Currently, we can supply a cap and battery adapter for CR123A systems to include the Trijicon IR Patrol series, Skeet (units without the USB port), and DTNVG and DTNVS goggles. A splitter cable system for combining the DTNV- and COTI or IR Patrol/Skeet is also available. We intend to support goggles with a Fischer or Lemo port as well. AA battery systems can also be created, if desired.

As additional systems some online I'll make a post here. If you have a system for which you'd like to get a USB battery adapter made up, please send me a PM and we'll see what we can do for you.

Second dual cable system testing before delivery. Using FlexSeal on the splitter and regulator box, seems to be an improvement on adhesive heat shrink. No really good way to apply that on the splitter assembly.

View attachment 7909265
I'm new to snipers hide so I do t know how to contact you on here. I have a lwts clip on thermal that I would like a battery pack made for.