GA Precision GAP-10

#401
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kcartwright27</div><div class="ubbcode-body"> I would agree with Broker there.. I am at two months almost right on the dot.. i initially thought the wait wouldnt be too bad.. you know.. start accumulating some ammo, getting mags, on and on.. but it is starting to kill me :) I can only imagine what some of the folks getting bolt guns go through... i am hoping it is still moderately warm when she arrives soon.. but at the end of the day. i will be out there in the butt ass cold enjoying my new gap10 when it arrives..
and yes. pics will be up as soon as i get her home.. good thing is is live about 20 minutes away from the GAprecision mothership so no waiting on shipment or FFL transfer.. </div></div>

I'm right there with you. Call me a jerk, but I hope I get mine before you! Just a friendly joke (kind of)...

My brass, dies, powder and primers arrived today. I'm READY for that call!
 
#402
Re: GA Precision GAP-10

I couldn't wait for one because I knew I would go nuts. I ended up finding a Gap built ar10 that was unfired a few weeks back. I just got my nightforce on it and will be sighting it in this weekend.
 
#405
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bm11</div><div class="ubbcode-body">Damn, that rifle length handguard is sexy! That with a 16" barrel would be a sick combination! </div></div>

I'm fairly certain they're only offering it on the 20-22" models...
 
#408
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Casey Simpson</div><div class="ubbcode-body"><span style="font-family: 'Times New Roman'"><span style="font-size: 11pt">The large chassis Armalite bolt and pin is of the smaller size and functions flawlessly, apparently.

I bushed the bolt and pin on my 6.5x47L LR-308 convert, used CCI#41 primers and the gun never failed to detonate but not before that modification which was allowing primer extrusion. As far as the pin was concerned, the modification required only that the tip of the pin be honed which was not sufficient weight removal to decrease inertia required for detonat</span>ion strike.</span>

The two cartridges are similar to the extent to be nearly identical except for primer size. LR primers are better suited to AR big rifles but Armalite seems to use the better pin successfully. </div></div>

I think we can rest assured George and his smiths know what they are talking about....
What is the fixation on the 6.5x47 out of the AR10 platform? The 6.5CM is going to do anything you want a 6.5 to do and probably do it better with more case capacity, less costs, and better brass availability. I shoot both calibers but prefer the 6.5CM. Now with his newer 6CM you have an efficient 243 stuffed into a gas gun, that is badass!
 
#415
Re: GA Precision GAP-10

Well folks its here.. got the call yesterday and promptly drove about 110mph down to the GAP store today..
total time until my call 9 weeks 5 days
Specs :
coyote tan.. my lighting in the pic isnt good. it actually looks lighter in the sunlight.. will grab some more pics this evening as i scare the crap out of my neighbors with this outside on the back porch :)

20" barrel
rifle length hand guard and gas system
PRS stock
Yankee hill 7.62 QD suppressor mount / flash hider
Vortex PST FFP 4-16x50 scope
Harris bipod

starting my paperwork for a can here soon.. maybe that will be here and cleared by spring..
crazy.gif



i have a stack of mags ready to go and 500 rounds of FGMM
will be taking her out Friday and will report back with the initial range report.. and yes that is a brand new EMPTY mag in the rifle.. hehe

img2011110900011.jpg

 
#416
Re: GA Precision GAP-10

I got to shoot mine yesterday and let me tell you its a freaking laser ! I wish I could post a picture of the target . The first 5 were in the same hole than she opened up to around 1/2" for the last 5. I shoot the 10 shot group in about 15 seconds . I'm super pumped about the gun I just need the rifle length handguard and she'll be done .
 
#420
Re: GA Precision GAP-10

Thanks , yes that's what I meant . I plan on buying a surefire muzzle break and the guys at GAP must have been swamped because I couldn't get through . I've never had a custom gun before and to say I'm happy is a major understatement ! Needless to say GAP has made a customer for life . If they do that with a semi I can't wait to send them one of my bolt guns . I heard about the 3/8's groups but didn't think I'd be able to get that level of accuracy .
 
#422
Re: GA Precision GAP-10

I got my GAP 10 this afternoon. 18" OD Green 1:10 twist w/ PRS and Surefire brake.

I got lucky... when I called a couple weeks ago to order one there was one avaiable. Ken offer it to me instead of building one. I took it....
DSCN1389.jpg

DSCN1390.jpg

DSCN1399.jpg

DSCN1392.jpg

DSCN1398.jpg

DSCN1396.jpg

DSCN1397.jpg


I took it out of the black Plano style gun case it was shipped in and took pictures. I added the harris for pictures.

Now the break in begins.....
 
#426
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: eXstasy</div><div class="ubbcode-body">Yours looks like the rifle length guard to me. The middy has 14 holes in the handguard vs 17 for the rifle length. You can also see the gas block protruding just slightly from the guard, which is indicative of the new design.

I wouldn't complain at all though, I think it looks better, and the rifle length gas should be great if you're attaching a suppressor to that. </div></div>

I think eXstasy is correct. I looked back in the thread and counted Kcartwright27's rifle length handguard.

Sorry for any confusion.
 
#427
Re: GA Precision GAP-10

csmith411,

That thing looks awesome! Especially with the rifle length HG. I think that is probably the configuration I will go for (18" bbl with rifle length HG)when I finally get to order one. Congrats!!
 
#428
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Vette447</div><div class="ubbcode-body">csmith411,

That thing looks awesome! Especially with the rifle length HG. I think that is probably the configuration I will go for (18" bbl with rifle length HG)when I finally get to order one. Congrats!! </div></div>

Thanks Vette447.

I really think you should order one soon. But if not you can shoot mine. That's only fair since I have got to shoot some of your's.

We need to go shoot after the Thanksgiving and before pistol league starts.
 
#431
Re: GA Precision GAP-10

Wow......talk about a thread filled with butt hurt knuckleheads on both sides.

I'm considering a GAP 10 and I was hoping this thread would deliver some good info.

It's not worth filtering through the nonsense to find it.
 
#432
Re: GA Precision GAP-10

Not much nonsense in this thread, only one guy who was threatened by the gap 10...
The first several pages are of LL review and very informative.

I can tell you mine outshoots most bolt guns at my range with out any problems at all.
 
#435
Re: GA Precision GAP-10

Just ordered one in 6.5CM. I can't wait to get it. Anyone know if the rail or the one piece scope mount have 20moa built in? I could not find the info on their site. Now I need to decide on the scope.
 
#436
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: csmith441</div><div class="ubbcode-body">Ken said this was a midlength setup.

It seems long for a midlength to me. That could be the reason why they try to push you away from Rifle Length system with 18" barrels. </div></div>


Pretty sure this is the one I fondled at their shop. Nice rifle and I love the look of the long hand guards on the shorter barrel.
 
#437
Re: GA Precision GAP-10

After assimilating far too much gun porn tonight, and after having read every post on this thread - I'm now hopelessly enamored with the idea that my next purchase will most likely be a GAP 10 in .308. Crap - I hate gun running even small ....."improvements" past the wife. After all this time though - I'm going to have to break it gentle to her that this is truly something I "need".

Impressive rifles for those who own one.
 
#438
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KYS338</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: csmith441</div><div class="ubbcode-body">Ken said this was a midlength setup.

It seems long for a midlength to me. That could be the reason why they try to push you away from Rifle Length system with 18" barrels. </div></div>


Pretty sure this is the one I fondled at their shop. Nice rifle and I love the look of the long hand guards on the shorter barrel. </div></div>

If you fondled one that had black Magpul UBR stock on it..... It might have been this one. I had them change out the UBR for a PRS.

Thank You.. I also love the look and feel of having a longer handguard.
 
#440
Re: GA Precision GAP-10

Glad I found this thread, been looking for an accurate semi 308. Got one ordered in 308, black, 20 inch barrel, rifle length handguards, rifle length gas system, prs stock, sent in geissele NM trigger and aac qd break. Can't wait to try it!
 
#441
Re: GA Precision GAP-10

Still waiting on that RANGE REPORT
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: kcartwright27</div><div class="ubbcode-body">Well folks its here.. got the call yesterday and promptly drove about 110mph down to the GAP store today..
total time until my call 9 weeks 5 days
Specs :
coyote tan.. my lighting in the pic isnt good. it actually looks lighter in the sunlight.. will grab some more pics this evening as i scare the crap out of my neighbors with this outside on the back porch :)


Waiting on a range report!!!!!!!

20" barrel
rifle length hand guard and gas system
PRS stock
Yankee hill 7.62 QD suppressor mount / flash hider
Vortex PST FFP 4-16x50 scope
Harris bipod

starting my paperwork for a can here soon.. maybe that will be here and cleared by spring..
crazy.gif



i have a stack of mags ready to go and 500 rounds of FGMM
will be taking her out Friday and will report back with the initial range report.. and yes that is a brand new EMPTY mag in the rifle.. hehe

img2011110900011.jpg

</div></div>
 
#442
Re: GA Precision GAP-10

Question regarding muzzle brake for Gap-10. I placed my order on Dec 23rd for Gap-10, 18" barrel, rifle length hand guard, PRS stock, titan muzzle brake. I am still undecided on the brake I want. This will be my first semi auto rifle. What separates one brake from another? Is it mainly the "look" you are seeking or does one function better than others? Your feedback is appreciated.

Thanks, David M
 
#443
Re: GA Precision GAP-10

I think trying to attribute performance differences between brakes would be splitting hairs. I have a GAP10 and HRT, both with the surefire brakes and both rifles are freak shows performance-wise. I get consistent 3/4-1 MOA out of the GAP10 and consistent 3/8-1/2 out of the HRT at 850 yards.

I wanted to test both of them without the brakes but then thought...why? These things run so good as is I don't even like wiping the dirt off of them. Does the brake play a role? Don't know but I absoutely won't change a thing on either rifle. I have heard other shooters that have watched me shoot comment..."Damn...those rifles don't budge when you shoot them".
 
#446
Re: GA Precision GAP-10

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: David M</div><div class="ubbcode-body">Question regarding muzzle brake for Gap-10. I placed my order on Dec 23rd for Gap-10, 18" barrel, rifle length hand guard, PRS stock, titan muzzle brake. I am still undecided on the brake I want. This will be my first semi auto rifle. What separates one brake from another? Is it mainly the "look" you are seeking or does one function better than others? Your feedback is appreciated.

Thanks, David M </div></div>



I have the Titan break on mine and there is no recoil to mention. I will say it is loud though (all breaks are). I was using it for deer season and after firing a few times it really hurt my left ear.
I will probably order a thread protector for it and put that on for hunting season next year.
 
#447
Re: GA Precision GAP-10

Is it possible to order just a complete upper receiver? I have a POF lower that has been sitting for a long time. I was planning to just finish it with a POF upper, but I wouldn't mind having a GAP 10 upper.
 
You must log in or register to reply here.

Similar threads

C
6gt gap 10
Replies
4
Views
504
codym
C
S
Does it matter who machines your barrel?
Replies
17
Views
982
unclemoak
unclemoak
hacabrera071
GA Precision GAP-15 Accuracy
Replies
7
Views
1K
Bigjake83
Bigjake83
White_Shark
SOLD WTS: GA Precision GAP-10 G2 6.5 Creedmoor
Replies
8
Views
2K
trainedsafe
trainedsafe
3rdfocal
SOLD GA Precision GAP-15 6ARC
Replies
8
Views
873
3rdfocal
3rdfocal
Top Bottom
Back
Home
Forums
Merch
Alerts