Anyone else have issues with hornady brass primer pockets basically being done after one maybe two firing? I just got my 6mm creedmoor build back from accurate ordnance and absolutely love the setup (bolt gun). It's a complete laser with the 105gn Hybrids. Are there any other options besides doing all the work to turn a 22-250 into a 6mm creedmoor to actually get good or half way decent brass? It really has me pissed off that the brass sucks so bad. Here is a video of once fired brass with a primer inserted getting ready for its second reload. I guess I'll just keep buying it and using it until the primers fall out of the damn brass. Hornady if your reading this is an issue! This is the brass made for GAP and was bought from GAP with the proper 6mm creedmoor headstamp.
Load is 42.6gn of h4350 with Cci 250 primers running a 105gn Hybrids at 3152fps. Still tons of room in the case and it was taken to 44.3gn or somewhere around there during load development just to see where pressure started to show and I had a small ejector swip at that charge which pusjed the 105 close to 3350fps if I recall correctly. Data book would have the exact numbers but it wouldn't gain me anything but a Dq in a match and half the life of the barrel.
https://www.youtube.com/watch?v=8tpfY-dwJ5I&feature=youtube_gdata_player
Sent from my DROID RAZR HD using Tapatalk
Load is 42.6gn of h4350 with Cci 250 primers running a 105gn Hybrids at 3152fps. Still tons of room in the case and it was taken to 44.3gn or somewhere around there during load development just to see where pressure started to show and I had a small ejector swip at that charge which pusjed the 105 close to 3350fps if I recall correctly. Data book would have the exact numbers but it wouldn't gain me anything but a Dq in a match and half the life of the barrel.
https://www.youtube.com/watch?v=8tpfY-dwJ5I&feature=youtube_gdata_player
Sent from my DROID RAZR HD using Tapatalk