Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
How in the heck do I get my Iray Rico to go into standby mode while I’m scanning?? I can’t get it figured out. I’m kinda retarded so any help would be greatly appreciated!!!!!
After the unit powers up, you can put it into standby mode by pressing and holding the power button as you would do to shut it off, but release the button before the shut off countdown timer ends. One single press of the power button should wake it up.
Thank you, I had read that. I am never able to get into standby. When I hold down the power button and release it during the countdown (page 9) it stays on no matter the setting (page 19.
I may have solved this riddle! Apparently irahy did a recent firmware update that changed the standby function. It doesn't work by using the menu like the manual says. I was told pressing the up & power simultaneously now puts the unit in standby.
If you've got one of these and the other buttons are driving you mad I also found out you now have to press the menu to wake it up and then press it again for it to take. Now not all buttons require a double tap, just the menu.
As long as you can type morse code in the dark you shouldn't have any issues running it. Good luck!