Any one use this brass .I have about 500 pulled down never fired . Putting the same load in a Winchester case and an IVI case has a noticeable difference in powder level .If I remove 2 grains from the IVI case ,it sets level with the Winchester load . I'm guessing dropping the load 2 grains would be a good place to start. Arnie
- Thread starter arnie19
- Start date
IVI is .mil brass, no?
A 7-8% reduction in charge is probably a good way to go, for starters, so you're close.
Chris
A 7-8% reduction in charge is probably a good way to go, for starters, so you're close.
Chris
Similar threads
