Tikka T3x action in MPA BA chassis with full set of internal forend and stock weights. The weight of the rifle with a DNT TheOne 7-35X56 scope is 18.1lbs (scope and Vortex rings are additional $600). Comes with a thread protector. Muzzle threads are standard 5/24x28.
The bolt and the barrel were fluted in wrought iron pattern, and cerakoted black by LRI. The barrel is 26" KP 1:7.75" twist Remington Varmint barrel also chamered by the LRI. The rifle looks beautiful and it is a work of art. The bolt is super smooth, think melted butter smooth...
Firing pin bushing was also done by LRI. I tested the rifle with 31.6gn of Varget in Peterson brass, 105gn Berger HT bullets and it gets about 2920 fps.
This rifle has less than 150 rounds through it and is the most accurate rifle I own, less than 0.5" 5 round groups on 100 yards. It also comes with upgraded bolt handle and upgraded bolt knob and 2 stage Timney Tikka trigger. Original Tikka bolt handle and bold knob will be included.
Harrells Precision sizing die specifically made for this rifle, https://www.harrellsprecision.com/products/full-length-die is also included.
6mm Dasher rifle in MPA chassis with Harrells Precision sizing die is $2500 shipped to your FFL in lower 48 states. It has everything to get you started with PRS and loading 6mm Dasher rounds. PayPal F&F (discreet, no comments), Zelle, Venmo and Cash App are accepted.
This was originally Tikka T3 JRTXE316 T3x Lite 308 Win, since 6mm Dasher is using same bolt face as .308, LRI converted it to 6mm Dasher and I still have original Tikka stock and 22.4" .308 barrel which was threaded by LRI (both Tikka stock and .308 barrel are new, I never used them). LRI installed shoulder on .308 barrel to help better retain muzzle brake or a suppressor better, since original barrel has somewhat small diameter at the miuzzle.
Tikka stock and .308 barrel are additional $350. If you have Tikka action wrench, you can easily convert it to .308 hunting rifle and back to PRS rifle, so you get 2 rifles in this way.
The bolt and the barrel were fluted in wrought iron pattern, and cerakoted black by LRI. The barrel is 26" KP 1:7.75" twist Remington Varmint barrel also chamered by the LRI. The rifle looks beautiful and it is a work of art. The bolt is super smooth, think melted butter smooth...
Firing pin bushing was also done by LRI. I tested the rifle with 31.6gn of Varget in Peterson brass, 105gn Berger HT bullets and it gets about 2920 fps.
This rifle has less than 150 rounds through it and is the most accurate rifle I own, less than 0.5" 5 round groups on 100 yards. It also comes with upgraded bolt handle and upgraded bolt knob and 2 stage Timney Tikka trigger. Original Tikka bolt handle and bold knob will be included.
Harrells Precision sizing die specifically made for this rifle, https://www.harrellsprecision.com/products/full-length-die is also included.
6mm Dasher rifle in MPA chassis with Harrells Precision sizing die is $2500 shipped to your FFL in lower 48 states. It has everything to get you started with PRS and loading 6mm Dasher rounds. PayPal F&F (discreet, no comments), Zelle, Venmo and Cash App are accepted.
This was originally Tikka T3 JRTXE316 T3x Lite 308 Win, since 6mm Dasher is using same bolt face as .308, LRI converted it to 6mm Dasher and I still have original Tikka stock and 22.4" .308 barrel which was threaded by LRI (both Tikka stock and .308 barrel are new, I never used them). LRI installed shoulder on .308 barrel to help better retain muzzle brake or a suppressor better, since original barrel has somewhat small diameter at the miuzzle.
Tikka stock and .308 barrel are additional $350. If you have Tikka action wrench, you can easily convert it to .308 hunting rifle and back to PRS rifle, so you get 2 rifles in this way.
Attachments
Last edited:
