Check out the sr25 cartel barrels. They are made for the SR25. I had d. Wilson convert one for me, turned out great. I have yet to shoot it but I have little doubt it will preform well.
I looked at those. They look cool, but they are twice the price of the Craddock RTR 6.5 barrels.
If the Craddock RTR shoots like any other Craddock and is reliable unsuppressed as well as suppressed, that just seems like a solid move to me.
If you are looking at the RTR line then it definitely makes sense to go that route. If they have what you are after I'm sure it will serve you well.
UPPER SALE Archives - LMT Defense
While supplies last, purchase a MRP-H, M-LOK upper and receive a FREE barrel in one of the following calibers: .308CIP, 7MM-08, .243 Winchester, or 260 Remington. Note: These barrels may never be produced again, so don’t miss out!
lmtdefense.com
LMT having a sale for anyone looking
My chrome lined barrel is settling in. Loves FGMM, hates AAC (even though speed, ES and SDs are similar).
My factory LMT SS barrel certainly doesn’t disappoint.
Attachments
Those of you handloading for your LMT's, how much are you bumping shoulders, the usual .002" or do you give a gas gun a little more ?
Most of my fired cases according to my hornady comparator are coming out 1.632"
I did have 2 out of 10 at 1.630" and 1 at 1.6295"
I'm leaning towards 1.629" and roll with it. This 16" CL likes factory 168 hornday black so I've got some Amax's and imr4064 that I'm going to try.
Most of my fired cases according to my hornady comparator are coming out 1.632"
I did have 2 out of 10 at 1.630" and 1 at 1.6295"
I'm leaning towards 1.629" and roll with it. This 16" CL likes factory 168 hornday black so I've got some Amax's and imr4064 that I'm going to try.
I do 4 thou, think that is plenty. But just my opinion. Im sure other might do the 2 thou. But believe it's what one wants.
Stuff like this is exciting.
Any leads on 14.5" 6.5CM MWS barrels? Custom or LMT?
Yes. Last update I got from LMT is barrels are 30-60 days out (though this seems to be a moving target). 14.5” and 16” versions will be available in stainless.
There will be both. First run is standard weight.
Sounds like LMT is going to release a factory 14.5 MRGG-A on the commerical market.
Pricey, but this is what you want.
Made a trip to LMT last week. Saw my 16” 6.5 Creedmoor barrels finishing up production and getting test fired.
View attachment IMG_1318.jpeg
View attachment IMG_1318.jpeg
I’ve gone back and forth on selling this rifle. Since getting into precision bolt guns the “cool factor” of a semi-auto precision rifle has dwindled for me.
When the ZC420 arrived I had a hard time wanting to let go of that optic, since I originally purchased it for this rifle.
I didn’t realize just how much the resale value of LMT’s have dipped since I put this thing together, so deciding to just keep it.
Shoutout to Tony @ MKMaching for giving me a great deal on the optic
When the ZC420 arrived I had a hard time wanting to let go of that optic, since I originally purchased it for this rifle.
I didn’t realize just how much the resale value of LMT’s have dipped since I put this thing together, so deciding to just keep it.
Shoutout to Tony @ MKMaching for giving me a great deal on the optic
I believe that because they are very easy to obtain parts for now (compared to 2021-2022 time frame) the market is flooded with used parts for sale, driving prices lower.
I’ve been using 147 ELDM for the 65 CM in my PF CF DWilson spun barrel.
Found I had to load it a little hotter to maintain similar velocities to the factory 147 ELDM. No pressure signs or anything like that,,and still within the limit for H4350 loads.
Shoots like a dream.
I’ve just picked up the 308 piston upper and will start playing with that. I’ve got crazy amounts of 175 FGMM, so that’s the plan for that barrel… though I also have a lot of German mild steel M80.
Similar threads
Firearms
LMT MWS BCG
Accessories
LMT MWS H Quad Upper
