-
Watch Out for Scammers!
Make sure the person you're messaging is trusted and do not use PayPal Friends & Family for your purchase, this is a common tactic for scammers. Keep safe!
Accessories LoRa Mesh | IP Mesh MANET | for ATAK/Offgrid Encrypted Comms
- Thread starter Bilb0
- Start date
Update: The custom wireless network modules arrived today; for testing in the IP mesh MANET units. Once testing is complete, I'll have a bulk order shipped for final assembly. 
Created an "IP Mesh updates" page on the MorosX.com for weekly progress description.
I do have encrypted Lora mesh units available via here on SH; along with IP Mesh Pre-order availablility via website.
Created an "IP Mesh updates" page on the MorosX.com for weekly progress description.
I do have encrypted Lora mesh units available via here on SH; along with IP Mesh Pre-order availablility via website.
These are similar builds to what *ahem* someone *ahem* attached to a drone to get more range for passing pull-push GPS coordinate sharing between cheap phones. Lets you see your whole team's location on a cheap phone screen map in pretty close to real time, depending on polling pattern. Poor man's blue force tracker.
Put up a Memorial day discount for $50 off each LoRa unit; through here or the website (MorosX.com)
"MEM50" for Encrypted LoRa Mesh Units.
"MEM50" for Encrypted LoRa Mesh Units.
Last edited:
IP MANET Radio Update:
Buttoning up final tid bits of hardware programming and the bulk order of parts for assembly. I made the wireless network module easy to remove behind the heatsink for future wireless module upgrades and frequency swapping.
New wireless technology develops fast, with that in mind; no one wants to have to purchase an entire new mesh radio for a simple upgrade. I'll release new wireless network modules in the future to swap out so there won't be a need to upgrade the entire unit, only the wireless network module. Much more cost effective.
*Wireless network module in photos is a demo module only. I will be keeping the current wireless network module within the IP MANET units under wraps until they ship.
Matte case is non reflective, my camera pics up too much light. I was able to capture one photo that shows the non reflective matte black finish.
An additional feature to the IP MANET radio will be a flat Rapid-Mate style 32 pin side connector. A cable will attach to the 32-pin side connector on the radio. A USB-C plug on the opposite end will connect to an EUD/Laptop/Smart device via USB-C OTG. This will allow hardwiring of the radios mesh network via Ethernet. (http://www.morosx.com)
Buttoning up final tid bits of hardware programming and the bulk order of parts for assembly. I made the wireless network module easy to remove behind the heatsink for future wireless module upgrades and frequency swapping.
New wireless technology develops fast, with that in mind; no one wants to have to purchase an entire new mesh radio for a simple upgrade. I'll release new wireless network modules in the future to swap out so there won't be a need to upgrade the entire unit, only the wireless network module. Much more cost effective.
*Wireless network module in photos is a demo module only. I will be keeping the current wireless network module within the IP MANET units under wraps until they ship.
Matte case is non reflective, my camera pics up too much light. I was able to capture one photo that shows the non reflective matte black finish.
An additional feature to the IP MANET radio will be a flat Rapid-Mate style 32 pin side connector. A cable will attach to the 32-pin side connector on the radio. A USB-C plug on the opposite end will connect to an EUD/Laptop/Smart device via USB-C OTG. This will allow hardwiring of the radios mesh network via Ethernet. (http://www.morosx.com)
Last edited:
