did you notice a difference when using them?Have the Jellies in my ACC Elite and in my expirience they weren´t that hard to fit, just like as i expected.
I used Redding Imperial Sizing Wax for both sides of the Buttstock with a bit of pressure .
did you notice a difference when using them?Have the Jellies in my ACC Elite and in my expirience they weren´t that hard to fit, just like as i expected.
I used Redding Imperial Sizing Wax for both sides of the Buttstock with a bit of pressure .
I had a similar experience, I used hand sanitizer and they slipped right in like prom night. After 5 minutes all the sanitizer was goneHave the Jellies in my ACC Elite and in my expirience they weren´t that hard to fit, just like as i expected.
I used Redding Imperial Sizing Wax for both sides of the Buttstock with a bit of pressure .
I had hope that the "clear" Prototypes would make it into production, since they are the best match for the Blue ACC Elite in my Opinion.
I had my elite for a few months before the jellies were released. Had a few original premiers a couple years before that. The vast majority of the improvement in felt vibration came from the stabilizer bar in the elite in my opinion. The jellies made a small improvement, but nothing major. I'd call it a 85 - 15 split. The jellies are significantly more effective in the original premier.did you notice a difference when using them?
The NV bridges will have the dowel pins but they are not needed on the control bridgesBtw werent the control bridges supposed to have pins? Mine dont, not that it matters for me or for my use but was wondering if it changed, totally missed the info about it
They should be launched here in the next couple of months. Make sure you are signed up for the newsletter; we will let you know right when it has been released.Hey @MDT_OFFICIAL when the crush it timers are supposed to hit the shelves?
Thank you. Hope you will also launch a proper bag rider for the elite.They should be launched here in the next couple of months. Make sure you are signed up for the newsletter; we will let you know right when it has been released.
Thank you. Hope you will also launch a proper bag rider for the elite.
Yep, but they don’t ship outside the USJKL's is decent.
Might be something in the works Make sure to stay tunedThank you. Hope you will also launch a proper bag rider for the elite.
Awesome to hear you are enjoying the Elite chassis!The new comp gun build is ready and damn for me, this is a game changer vs the old setup. Tikka action, straight 26" 28.5mm thick barrel. Weight comes in around 11.5kg with the bipod and is still "lighter" and easier to maneuver and better balanced vs the trg build even though the trg weighed about 8.5-8.8kg and was slightly rear heavy. Have minimal trigger time with the setup but still super happy with the elite. Pretty much only two complaints are that its 6061 and not 7075. Dont know if it actually matters in the end, but kind of a snob about material, dont really see a reason why not to use 7075. The other is that even though the vblock bedding works like a charm, the amount of contact is so slim - pretty much only the edges that Im really thinking about bedding the action just in case. Someone complained about a different action that had the same amount of contact that it actually carved the chassis abit and ended up with some play at the rear of the action. But otherwise I love the elite. It really came down between this and the new Vision Pro chassis and since the vision doesnt have a tikka inlet yet and got the elite for a good deal thats that. The sics chassis would also be an interesting option (a few friends have them) but didnt like the 3 piece design, "short" fore-end (16") and especially the needlessly way too far forward barricade stop. Had the same issues with the original vision chassis