• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

MK 12 Picture & Discussion Thread

i imagine it was bought right from pri, i picked it up in the marketplace here.
the upper says precision reflex on it though.

If it is a PRI factory upper, you may wish to re-torque anything with threads. I had a factory PRI MOD 0 where pretty much everything except the barrel nut and muzzle break came loose in the first 600 rounds. On a MOD 0 that is a lot of threaded fasteners.
 
  • Like
Reactions: deersniper
hmmm. ive had this one all apart and everything was super tight coming apart. maybe previous owner did it or maybe theyre that inconsistent? lol.
thanks for the heads up though. thats a bummer to hear.
 
Super excited to see this thread, I've been following it for a while but keep getting caught up and distracted. My love affair with SPRs has mostly been a professional relationship but they are one of those things that are near and dear to my cold little heart. I actually had the privilege of cutting my teeth on the Mk12 MOD 0 back in the day, I honestly don't think you can find a cooler looking SWS, MOD 0 are just rad. That said, out of practicality I eventually switch over to the MOD 1 and while the lines aren't the same, the performance I got out of my MOD 1 was amazing. The MOD 0 always shot well, around 0.75ish, but I'm unsure of the round count on it before I inherited her, so that may not be fair. The MOD 1 I got in 2011 was a virgin and after a few hundred rounds she settled in to a solid 0.25 MOA gun.

Over the years I've built a couple of clones, but again being a man of practicality my nostalgia loses out quickly for lighter/faster variants. That said every time I see a MOD 0 or MOD 1, I find myself whispering "Fuck yeah" LOL.

Here's a pic of my MOD 0 back in 09'-10'. While I originally feel in love with it for urban work in places like Iraq, it was a pretty descent jungle stick too, although I totally ditched the bipods.

Screen Shot 2018-09-13 at 10.05.38 AM.png


And here is a pic of my MOD 1 in Afghanistan 12". While I'd say 5.56 was definitely a little on the light end for most of my work as ranges goes but it definitely offers advantages for some situations. We mainly employed along side the Mk13s or 107s as a sniper support rifle for the spotters, or in situations where snipers were embedded as singletons in support of maneuver elements. I favored it quite a bit over the M110 for weight savings and commonality of ammo. You wouldn't think 80 rounds of LR would go so quick but 10 hours into a fire fight and you find your down to your last mag and a half, it is not a great feeling. LOL!

Screen Shot 2018-09-13 at 10.04.13 AM.png
 
Super excited to see this thread, I've been following it for a while but keep getting caught up and distracted. My love affair with SPRs has mostly been a professional relationship but they are one of those things that are near and dear to my cold little heart. I actually had the privilege of cutting my teeth on the Mk12 MOD 0 back in the day, I honestly don't think you can find a cooler looking SWS, MOD 0 are just rad. That said, out of practicality I eventually switch over to the MOD 1 and while the lines aren't the same, the performance I got out of my MOD 1 was amazing. The MOD 0 always shot well, around 0.75ish, but I'm unsure of the round count on it before I inherited her, so that may not be fair. The MOD 1 I got in 2011 was a virgin and after a few hundred rounds she settled in to a solid 0.25 MOA gun.

Over the years I've built a couple of clones, but again being a man of practicality my nostalgia loses out quickly for lighter/faster variants. That said every time I see a MOD 0 or MOD 1, I find myself whispering "Fuck yeah" LOL.

Here's a pic of my MOD 0 back in 09'-10'. While I originally feel in love with it for urban work in places like Iraq, it was a pretty descent jungle stick too, although I totally ditched the bipods.

View attachment 6943843

And here is a pic of my MOD 1 in Afghanistan 12". While I'd say 5.56 was definitely a little on the light end for most of my work as ranges goes but it definitely offers advantages for some situations. We mainly employed along side the Mk13s or 107s as a sniper support rifle for the spotters, or in situations where snipers were embedded as singletons in support of maneuver elements. I favored it quite a bit over the M110 for weight savings and commonality of ammo. You wouldn't think 80 rounds of LR would go so quick but 10 hours into a fire fight and you find your down to your last mag and a half, it is not a great feeling. LOL!

View attachment 6943845

thanks for the awesome pics!! and bigger Thank You for your service, how did you like the magpul stock on the mod 1?
 
Super excited to see this thread, I've been following it for a while but keep getting caught up and distracted. My love affair with SPRs has mostly been a professional relationship but they are one of those things that are near and dear to my cold little heart. I actually had the privilege of cutting my teeth on the Mk12 MOD 0 back in the day, I honestly don't think you can find a cooler looking SWS, MOD 0 are just rad. That said, out of practicality I eventually switch over to the MOD 1 and while the lines aren't the same, the performance I got out of my MOD 1 was amazing. The MOD 0 always shot well, around 0.75ish, but I'm unsure of the round count on it before I inherited her, so that may not be fair. The MOD 1 I got in 2011 was a virgin and after a few hundred rounds she settled in to a solid 0.25 MOA gun.

Over the years I've built a couple of clones, but again being a man of practicality my nostalgia loses out quickly for lighter/faster variants. That said every time I see a MOD 0 or MOD 1, I find myself whispering "Fuck yeah" LOL.

Here's a pic of my MOD 0 back in 09'-10'. While I originally feel in love with it for urban work in places like Iraq, it was a pretty descent jungle stick too, although I totally ditched the bipods.

View attachment 6943843

And here is a pic of my MOD 1 in Afghanistan 12". While I'd say 5.56 was definitely a little on the light end for most of my work as ranges goes but it definitely offers advantages for some situations. We mainly employed along side the Mk13s or 107s as a sniper support rifle for the spotters, or in situations where snipers were embedded as singletons in support of maneuver elements. I favored it quite a bit over the M110 for weight savings and commonality of ammo. You wouldn't think 80 rounds of LR would go so quick but 10 hours into a fire fight and you find your down to your last mag and a half, it is not a great feeling. LOL!

View attachment 6943845
What scopes were you running with it?
 
Super excited to see this thread, I've been following it for a while but keep getting caught up and distracted. My love affair with SPRs has mostly been a professional relationship but they are one of those things that are near and dear to my cold little heart. I actually had the privilege of cutting my teeth on the Mk12 MOD 0 back in the day, I honestly don't think you can find a cooler looking SWS, MOD 0 are just rad. That said, out of practicality I eventually switch over to the MOD 1 and while the lines aren't the same, the performance I got out of my MOD 1 was amazing. The MOD 0 always shot well, around 0.75ish, but I'm unsure of the round count on it before I inherited her, so that may not be fair. The MOD 1 I got in 2011 was a virgin and after a few hundred rounds she settled in to a solid 0.25 MOA gun.

Over the years I've built a couple of clones, but again being a man of practicality my nostalgia loses out quickly for lighter/faster variants. That said every time I see a MOD 0 or MOD 1, I find myself whispering "Fuck yeah" LOL.

Here's a pic of my MOD 0 back in 09'-10'. While I originally feel in love with it for urban work in places like Iraq, it was a pretty descent jungle stick too, although I totally ditched the bipods.

View attachment 6943843

And here is a pic of my MOD 1 in Afghanistan 12". While I'd say 5.56 was definitely a little on the light end for most of my work as ranges goes but it definitely offers advantages for some situations. We mainly employed along side the Mk13s or 107s as a sniper support rifle for the spotters, or in situations where snipers were embedded as singletons in support of maneuver elements. I favored it quite a bit over the M110 for weight savings and commonality of ammo. You wouldn't think 80 rounds of LR would go so quick but 10 hours into a fire fight and you find your down to your last mag and a half, it is not a great feeling. LOL!

View attachment 6943845
Good stuff. Thank you.
What kind of Leupold in that second pic, with a TMR reticle Im guessing? Do you think its practical to consider the MK12 a 700y gun?
 
1.) The PRS stock was tad heavy, still lighter than the M110 all tricked out for work, but that stock was what I had at the time for getting a proper check weld. Nowadays I run a CTR with LaRue RISER.

2. and 3.) The optic on the MOD one is the Leupold Mk4 ERT 6.5-20x with H58 and the Aimpoint T1. The Mk4 MRT 2.5-8x was a dogshit optic. I mean too be fair, I guess it was ok for 04'-05' timeframe but not even close to a good choice in 12' or by todays standards. I ran the MRT in the early MOD 0 days but as I started really appreciating good glass that thing was gone.

4.) Practically, as a SWS under normal/standard atmospheric conditions, yeah a Mk12 is a solid 700y gun. She kinda lacks the authority farther out compared to the heavy cals but you can certainly conected out at distance...just not as "humanely".
 
I started down this rabbit hole on this trip home from Iraq. I am still missing some proper parts that will have to wait for my next trip home to install.

rifle #1 is a Factory PRI Mod 0 and its stupid accurate. I picked it up from Brownells with one of the 10% off codes which put it at the $1600 mark shipped. So far it has been worth the price of admission.

rifle #2 is a rebuild. I had a Colt LEO trade in M4 that I gutted and rebuilt. Still waiting on my #38 S-EX rail and proper rings/caps to get here but its looking like those mods will be the next trip home as I just want to get some rounds on it. I also have the proper M3A scope for the setup with the S-EX rail.
 

Attachments

  • IMG_9695.JPG
    IMG_9695.JPG
    467.2 KB · Views: 213
  • Like
Reactions: BR7.62
new project I'm working on :)
 

Attachments

  • 20180921_123207.jpg
    20180921_123207.jpg
    356.6 KB · Views: 167
  • 20180918_225354.jpg
    20180918_225354.jpg
    247.7 KB · Views: 178
  • 20180921_123606.jpg
    20180921_123606.jpg
    241.6 KB · Views: 145
  • 20180921_123628.jpg
    20180921_123628.jpg
    279.2 KB · Views: 142
  • 20180921_123713.jpg
    20180921_123713.jpg
    401.9 KB · Views: 166
details
Ballistic advantage enhanced receiver set
Ballistic advantage .224 SPR valkyrie ops in barrel
Ballistic advantage nitride valkyrie bcg
Ballistic advantage gas block/tube
Knights mk12 handguard
Knights mk12 sight set
Aero lpk with geissele SSAE
LMT sopmod
Leupold 2x8x36mm M1 scope
Harris BRMs with kac mount
need the ARMS rings and ammo and mags
 
  • Like
Reactions: TacDrvr
pics of my Mk12 clone
 

Attachments

  • 20180922_171026.jpg
    20180922_171026.jpg
    439.8 KB · Views: 169
  • 20180922_171036.jpg
    20180922_171036.jpg
    447.9 KB · Views: 175
  • 20180922_171111.jpg
    20180922_171111.jpg
    582.4 KB · Views: 202
  • 20180922_171129.jpg
    20180922_171129.jpg
    510.2 KB · Views: 187
  • 20180922_171217.jpg
    20180922_171217.jpg
    563.9 KB · Views: 146
  • 20180922_171145.jpg
    20180922_171145.jpg
    448.6 KB · Views: 159
  • 20180922_172040.jpg
    20180922_172040.jpg
    428.1 KB · Views: 184
Changed the NF scope out to the clone correct Leupold. Thanks to Leupold for a special run of MK12 scopes.
 

Attachments

  • 789CBAEC-9F4B-437F-8BA3-44D7AA1D90F8.jpeg
    789CBAEC-9F4B-437F-8BA3-44D7AA1D90F8.jpeg
    429.7 KB · Views: 199
  • ADAAF0F9-354B-4DD3-89F8-131E01186E47.jpeg
    ADAAF0F9-354B-4DD3-89F8-131E01186E47.jpeg
    1.4 MB · Views: 199
  • 2377FD91-B8C4-4DCA-83E2-E07915405024.jpeg
    2377FD91-B8C4-4DCA-83E2-E07915405024.jpeg
    627.7 KB · Views: 195
  • 645B9A01-7F82-472C-B47E-5497A7F679DC.jpeg
    645B9A01-7F82-472C-B47E-5497A7F679DC.jpeg
    698.1 KB · Views: 188
  • 58342D24-BCB4-45BF-88F8-E1F108909390.jpeg
    58342D24-BCB4-45BF-88F8-E1F108909390.jpeg
    914.7 KB · Views: 452
I know its not exactly and MK12 but since I built my MK12 I been wantin to do a Recce similar to an MK12 on a KAC lower. I got it all together today and shot it and then took it back apart to send the barrel to be cut, retreaded and the brake welded in place. I will have the suppressor flush with the rail when it comes back. It hated 62 grain pills and loved FGMM 77 grain. Can’t wait to get it back.
 

Attachments

  • 38476EA5-99CD-48BD-816D-EEDD1D2A1C4A.jpeg
    38476EA5-99CD-48BD-816D-EEDD1D2A1C4A.jpeg
    969 KB · Views: 148
  • 33DEF2FF-A185-4AC4-B990-24CB9F145D27.jpeg
    33DEF2FF-A185-4AC4-B990-24CB9F145D27.jpeg
    684.5 KB · Views: 162
The first time I saw the mod 0, I fell in love. To this day I believe it's one of the best looking rifles. I built this about 10 years ago or so. It was my second build. It has changed quite a few times over the years but this is the closest it's ever been to a replica.

I changed the barrel to the correct contour a couple years ago and already had a few thousand custom loads from the old one of 77 nosler and 8208 XBR. While it's hard to shoot 5 under an inch at 100 yds, it's insane at 300-800. I still don't understand that, but it is what it is. By far my favorite rifle to shoot.

Spikes upper/lower, BCM bcg, Geissele SD-E, PRI Gen III handguard and rail, PRi gas block, Ops brake and collar, ARMS 40L-SP rear and #22M rings. AEM5 still in jail.
IMG_6302.JPG
IMG_6303.JPG
 
The first time I saw the mod 0, I fell in love. To this day I believe it's one of the best looking rifles. I built this about 10 years ago or so. It was my second build. It has changed quite a few times over the years but this is the closest it's ever been to a replica.

I changed the barrel to the correct contour a couple years ago and already had a few thousand custom loads from the old one of 77 nosler and 8208 XBR. While it's hard to shoot 5 under an inch at 100 yds, it's insane at 300-800. I still don't understand that, but it is what it is. By far my favorite rifle to shoot.

Spikes upper/lower, BCM bcg, Geissele SD-E, PRI Gen III handguard and rail, PRi gas block, Ops brake and collar, ARMS 40L-SP rear and #22M rings. AEM5 still in jail.
View attachment 6977006View attachment 6977007


That’s an awesome build dude.. What brand barrel and twist is that?
 
I know its not exactly and MK12 but since I built my MK12 I been wantin to do a Recce similar to an MK12 on a KAC lower. I got it all together today and shot it and then took it back apart to send the barrel to be cut, retreaded and the brake welded in place. I will have the suppressor flush with the rail when it comes back. It hated 62 grain pills and loved FGMM 77 grain. Can’t wait to get it back.

i dont think cutting a inch off the barrel is worth thr effort or money honestly its fine the way it sits i did the same build with a HCS 16" douglas
 

Attachments

  • 20180425_123123.jpg
    20180425_123123.jpg
    497.3 KB · Views: 132
24 - 24.4gr of RL15 under a 77SMK and it'll shoot.

Yessir!! I swear that’s a great OCW for the 77SMK and that powder.. I shoot 24.1 RL15 in my Krieger 7.7 twist bolt gun, and it’s lights out!
 
i dont think cutting a inch off the barrel is worth thr effort or money honestly its fine the way it sits i did the same build with a HCS 16" douglas
With Dwilsonmfg doing the month of zuck special it only cost me $20 to have it cut, retapered for the collar, threaded and pinned and welded. That included teh return shipping. It looks sweet now, its probably 3/32” from the can to teh end of the rail.
 
With Dwilsonmfg doing the month of zuck special it only cost me $20 to have it cut, retapered for the collar, threaded and pinned and welded. That included teh return shipping. It looks sweet now, its probably 3/32” from the can to teh end of the rail.
excuse me but HOLY SHIT thats a sweet deal update the pics
 
  • Like
Reactions: lonestar1845
Bringing this back from the dead. After three years of searching I have finally found my Mildot 24mm NXS! I feel like I stole it, delivered for $1080 :)

Changed the battery and the illumination came right on. Glass is 98%. I could not be more tickled shitless. If it wasnt for a massive URI/Sinus infectionn I'd be at range today re-doing my zero and come ups. Getting old has mellowed me some...

20191213_102822.jpg
 
I knew this thread was still here somewhere. Couldn't find it when I searched a while back.

Mod H is best Mod. Been shooting 0.8-1.0 moa average with the BA barrel and 69gr SMKs under Varget. Have a few hundred more rounds left until I switch to some 73gr ELDs.

Knurled AEM5 should be approved in the next 2-4 months.

modH.jpg
 
Super excited to see this thread, I've been following it for a while but keep getting caught up and distracted. My love affair with SPRs has mostly been a professional relationship but they are one of those things that are near and dear to my cold little heart. I actually had the privilege of cutting my teeth on the Mk12 MOD 0 back in the day, I honestly don't think you can find a cooler looking SWS, MOD 0 are just rad. That said, out of practicality I eventually switch over to the MOD 1 and while the lines aren't the same, the performance I got out of my MOD 1 was amazing. The MOD 0 always shot well, around 0.75ish, but I'm unsure of the round count on it before I inherited her, so that may not be fair. The MOD 1 I got in 2011 was a virgin and after a few hundred rounds she settled in to a solid 0.25 MOA gun.

Over the years I've built a couple of clones, but again being a man of practicality my nostalgia loses out quickly for lighter/faster variants. That said every time I see a MOD 0 or MOD 1, I find myself whispering "Fuck yeah" LOL.

Here's a pic of my MOD 0 back in 09'-10'. While I originally feel in love with it for urban work in places like Iraq, it was a pretty descent jungle stick too, although I totally ditched the bipods.

View attachment 6943843

And here is a pic of my MOD 1 in Afghanistan 12". While I'd say 5.56 was definitely a little on the light end for most of my work as ranges goes but it definitely offers advantages for some situations. We mainly employed along side the Mk13s or 107s as a sniper support rifle for the spotters, or in situations where snipers were embedded as singletons in support of maneuver elements. I favored it quite a bit over the M110 for weight savings and commonality of ammo. You wouldn't think 80 rounds of LR would go so quick but 10 hours into a fire fight and you find your down to your last mag and a half, it is not a great feeling. LOL!

View attachment 6943845
What kind of leupold is that, which reticle?
 
Got the 1.3" Nightforce rings from a member here. Had in out last weekend to zero and get some come ups. Only have 100 and 500y.

If I'm being honest, the 32mm was easier on my eyes.

20200106_055448.jpg
 
  • Like
Reactions: MarshallDodge
20190303_092527.jpg
20190303_092557.jpg
20190303_092603.jpg


Here's my contribution. As close to spec as you can get without an armory card, save for the fun button trigger of course. Lower is an 80% etched to match the real m16 lowers that were used. Rack number on the stock was there when I bought it so I let it live. Didnt wanna erase the history too much on it
 
Recently parted with my MK4 Leupold in favor of a Nightforce NXS 2.5-10x42. Just prefer the Nightforce setup better. Anyone running a Nightforce scope with ARMS rings or have you all gone ahead and switched over to Nightforce rings to match?
 
not to match. The arms rings are known to be junk

If you're not going to use a "correct" optic, no reason to stick with the ARMS rings
 
I switched to NF ultralights after wandering zero with my ARMS rings not locking up tight enough View attachment 7359209


Sweet setup. I had heard the ARMS rings were a problem in doing some research today and yesterday, may be better to just switch over to nightforce all together and save myself the hassle.
 
  • Like
Reactions: FatBoy
For my Mod1 is was a total pain in the ass for load development. I went across everything from Nosler 77s, 77 SMK and eventually the TMK. Then couldn't get anything reliable to group at accuracy I was going to be happy with and chased it down the hole with Varget, 2000MR, RL15, Benchmark and finally had it all come together with 8202XBR.

When I got the Mod Holland afterwards, it was a simple adjustment and I had loads for both. Ironically, the 16 inch Holland shoots better than the 18 inch Mod1.


77g TMK,
23.4 IMR 8208 XBR
CCI 400,
1.8205 ogive OAL ~2.260 COAL
.002 neck tension (.2465 loaded diameter)
LC NATO Brass

old post but hah! My mod 1 was the exact same. Douglas barrel? 6 different projectiles and 3 different powders before getting to that glorious 77TMK and XBR combo. Shoots like a dream now. 23.5 gr XBR in LC brass w/ CCI400s. 2720 fps w/ 8-10 fps average SD.
 
my final Mod 1 build kit
 

Attachments

  • 20200627_112948.jpg
    20200627_112948.jpg
    675.5 KB · Views: 95
  • 20200627_112958.jpg
    20200627_112958.jpg
    411.3 KB · Views: 89
  • 20200627_113001.jpg
    20200627_113001.jpg
    430.7 KB · Views: 104
  • 20200627_113016.jpg
    20200627_113016.jpg
    257.7 KB · Views: 82
  • 20200627_113019.jpg
    20200627_113019.jpg
    414.3 KB · Views: 94
  • 20200627_113023.jpg
    20200627_113023.jpg
    412.6 KB · Views: 109
few more
 

Attachments

  • 20200627_113103.jpg
    20200627_113103.jpg
    288.2 KB · Views: 123
  • 20200627_113056.jpg
    20200627_113056.jpg
    230.3 KB · Views: 83
  • 20200627_113052.jpg
    20200627_113052.jpg
    235.2 KB · Views: 79
  • 20200627_113043.jpg
    20200627_113043.jpg
    284 KB · Views: 82
  • 20200627_113034.jpg
    20200627_113034.jpg
    348.7 KB · Views: 100
  • 20200627_113028.jpg
    20200627_113028.jpg
    430.1 KB · Views: 103