Parts Review and Buffer Question

[Pusher591]

Pretty sure parts list im pretty sure of but this is the first AR-10 I've tried to build myself, constructive criticism wanted.

Parts List:

Mega Ten Mono Upper/Lower
Lothar Walther Barrel Match 20" (.975 under handguard,.875 GB, .850 muzzle)
Paladin Adjustable Gas Block
Surefire 762SS Muzzle Brake
Young Man. Bolt Carrier
LMT Stock with SAPR Adjustable Cheek Peice

Question: I'm going to run a ar15 milspec tube so what spring and buffer should I run. Was thinking about running a RRA 9mm buffer to but will that be too heavy?

The gas system is rifle length and I will be running it suppressed but remember it will have an adjustable gas block.

 

[B3dlam]

Re: Parts Review and Buffer Question

I would make sure you run an AR-10 Buffer and AR-10 buffer spring using the incorrect buffer/spring will likely result in malfunctions down the line.

 

[Pusher591]

Re: Parts Review and Buffer Question

Ok, but does the AR10 spring work on a AR15 tube is the question I was looking to get answered.

 

[snakebyte922]

Re: Parts Review and Buffer Question

Yes the spring is the same the buffer is different. the ar10 buffer is shorter than the ar15

 

[DavidAR10]

Re: Parts Review and Buffer Question

I'd go with a MAGPUL PRS and call Slash @ Heavy Buffers
for one of his buffers and springs.

 

[Pusher591]

Re: Parts Review and Buffer Question

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DavidAR10</div><div class="ubbcode-body">I'd go with a MAGPUL PRS and call Slash @ Heavy Buffers
for one of his buffers and springs. </div></div>

I thouht about it but trying to keep the weight down where I can.