• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Precision Rifles.....show em!!

Yes, initially, Mike had asked for the action. I asked if I sent him the tenon print if he could make the barrel from that, and of course, being a machinist, his reply was, “absolutely!” But to time the the engraving to the side of the gun, he’d need the action or one of my old barrels. Originally I was going to send him a barrel, but eventually I told my OCD to get fucked, and told him to just engrave it anywhere. I’ll live with it.

Perfect that’s good to know, I don’t over care about the engraving either. I have a 223 prefit for a tl3 that is under the bell of the scope and my ks em precision 25 creed engraving is covered by the krg enclosed forend. I’ll definitely be ordering some prefits then!
 
  • Like
Reactions: onethousandmeters
Perfect that’s good to know, I don’t over care about the engraving either. I have a 223 prefit for a tl3 that is under the bell of the scope and my ks em precision 25 creed engraving is covered by the krg enclosed forend. I’ll definitely be ordering some prefits then!
Oh, yeah. Anything to cut that Curtis fanboi out of the loop. KS on the other hand are phenomenal to deal with.
 
  • Like
Reactions: onethousandmeters
Me Joining the 21st Century. Its all very Boomer:
Rem 700 Sendero 308 Circa 2000
KRG Bravo
Bushnel Elite
Harris (Sorry, the 6.5 got the Atlas)
Dead Air Sandman
 

Attachments

  • rig.png
    rig.png
    587.3 KB · Views: 126
Added this to the heard last year, just got it scoped today and shot it for the first time. Bore sighted, and instantly on paper @ 200 yards.

Sako TRG M10, 300 Win Mag 190 grain Federal Gold Medal Match. Sweet rifle, added the Sako brake and I could stay on target 100% after each shot.

Ended up getting a bunch of barrels from Beretta during their 40% off sales, 338 LM, 300 WM, 308 and 6.5. Extra bolts too!

20210417_162245.jpg


20210417_162257.jpg


20210417_162235.jpg


20210417_163931.jpg
 
Was doing barrel swaps last night. This action has worn some different stocks, chassis and scopes the past 4 years but this is the current configuration.
Bighorn TL3
26” PVA .223
18” PVA 6.5cm
XLR envy pro
Leupold mk5 HD
Hawkins Precision rings
 

Attachments

  • 8457DAE5-0FA0-45C5-8CB3-A720AC8FD454.png
    8457DAE5-0FA0-45C5-8CB3-A720AC8FD454.png
    1.3 MB · Views: 258
  • CA077911-4337-4DBC-AA05-CCD00F7E0B4F.jpeg
    CA077911-4337-4DBC-AA05-CCD00F7E0B4F.jpeg
    548.4 KB · Views: 242
Added this to the heard last year, just got it scoped today and shot it for the first time. Bore sighted, and instantly on paper @ 200 yards.

Sako TRG M10, 300 Win Mag 190 grain Federal Gold Medal Match. Sweet rifle, added the Sako brake and I could stay on target 100% after each shot.

Ended up getting a bunch of barrels from Beretta during their 40% off sales, 338 LM, 300 WM, 308 and 6.5. Extra bolts too!

View attachment 7606573

View attachment 7606574

View attachment 7606575

View attachment 7606576

That is an awesome setup! Thanks for sharing!
 
  • Like
Reactions: BuLLet
My latest rifle is in, and I hope to shoot it tomorrow. I ordered a barreled action from Caleb at Alpha and Omega and my God it impressed me. I can't recommend him enough... my 9yr daughter wants to use this one for her black bear this year now.... even she is smitten with it. The Rex Silentium can matches so well..
How do you like the Rex can?
 
My beginnings in Precision Shooting.

TC LRR in 6.5 Creedmoor
US Optics TS20X
Spuhr Ideal Mount
Atlas PRS Bipod w/Defy lever
MDT Vertical Grip
APW Muzzle Break

I plan to build another rifle later this summer and transfer most of the parts over using the MDT ACC chassis. Just not sure what caliber yet, might stay with 6.5cm since it’s so much fun.
 

Attachments

  • 1DF1E10F-E89D-4710-8635-8D7E73E3A16B.jpeg
    1DF1E10F-E89D-4710-8635-8D7E73E3A16B.jpeg
    693.5 KB · Views: 126
.260 Ackley
Rem 700 modified by LRI
Shilen 1:8 4 groove ratchet 19” full length, 15” exposed, fluted by LRI
PVD coated action and barrel
AE30
XLR Envy Pro
Mini Pro ARCA plate
Warhorse Cleat bag
Atlas PSR
Flat TriggerTech Special
LaRue 20 MOA Extended rail
Spuhr 5006
Leupold Mk5 HD CCI

The AR is a .556 of course
Knight’s SR15 E3 14.5” 1:7 hammer forged barrel with custom AE mount
AEM5
SLR Adj gas block
Knight’s gas tube
Knight’s E3 bolt, firing pin, and cam
JP LMOS carrier
JP SCS H3
Ace SOCOM stock
Rock River form 4 lower
Hiperfire PDI flat bow
Aero upper
LMT ch
PRI tube
Atlas PSR
PRI Recon
Badger rings
Leupold Mk4 TMR w/ M5 mil turrets

92822B5A-8DB9-4637-A6C2-A6785B0F7CAC.jpeg
14F03787-7B5C-4E96-82AA-D45D6683AC02.jpeg
3FE1214D-8B1A-4907-8E7E-9BF96C66AAF7.jpeg
 
DSCN2099.jpg


DSCN2135.jpg


DSCN2126.jpg


DSCN2140.jpg


6.5 Creedmoor
Cadex CDX-30 action
Tac30 chassis
Kreiger (#11) 1.25” straight 1:8” finished at 28”
Heathen 5 port brake
Timney CE trigger
Ergo grip
LRA Light Tactical bipod
NightForce NX8 4-32x50
Sphur SP-3602 (+20.6moa)
US Optics level
ARCA tripod mount


DSCN2148.jpg


DSCN2094-1.jpg
 
Last edited:
A few I changed up. I just picked the KAC up during my deployment the only one I have trigger time on is the Surgeon (Blue). The defiance just got a new scope. I have a CZ457 in the works due to a bad shoulder I wanted something with less recoil.
Baldwin Gun Works Defiance Deviant 6.5 24" Bartlein Barrel, Timney Trigger, Manners T6, Area 419 Rail, Area 419 Brake, Bushnell DMR Pro (Sold the Kahles)
Baldwin Gun Works Surgeon 223 24" Bartlein Barrel, Timney Triggers, Manners stock, Area 419 Rail, S&B PMII
Knights Armament ECR with Geissele Trigger NF NX8 4-32
CZ 457 Manners custom manners stock, Area 419 rail, Area 419 Scope mount, Bushnell DMR (At Baldwin Gun Works now)
 

Attachments

  • IMG_20210424_093651004.jpg
    IMG_20210424_093651004.jpg
    379.2 KB · Views: 161
  • IMG_20210424_094014771.jpg
    IMG_20210424_094014771.jpg
    521.5 KB · Views: 144
  • IMG_20210424_094616170.jpg
    IMG_20210424_094616170.jpg
    656.1 KB · Views: 155
Last edited:
Just a Tikka Tac A1. Nightforce 20MOA Unimount and a Vortex Viper PST Gen 2 5-25 for now. I'd like to upgrade the glass later, but it shoots very well for a factory rifle with factory ammo so I'm not in a hurry to swap it out. Atlas V8 Bipod. Completely factory rifle. It really likes the Sig 175's but so far its shot everything nearly as well as those, but they get the edge.
IMG_5258.JPG
 

Attachments

  • IMG_5273.JPG
    IMG_5273.JPG
    1.1 MB · Views: 56
Just a Tikka Tac A1. Nightforce 20MOA Unimount and a Vortex Viper PST Gen 2 5-25 for now. I'd like to upgrade the glass later, but it shoots very well for a factory rifle with factory ammo so I'm not in a hurry to swap it out. Atlas V8 Bipod. Completely factory rifle. It really likes the Sig 175's but so far its shot everything nearly as well as those, but they get the edge.
View attachment 7614469
That is an awesome rig. Thanks for sharing!
 
  • Like
Reactions: TheChief
Damn, thats a hell of a nice looking rifle! Who built the rifle for ya? I really dig that stock.
Area 419 spun the barrel and I bought the stock from them a year or so ago... and then a friend helped torque the barrel on. This is my first one based on a prefit.
 
Area 419 spun the barrel and I bought the stock from them a year or so ago... and then a friend helped torque the barrel on. This is my first one based on a prefit.
Nice. I love Area 419's stuff. They're great. I didn't know they made stocks as well, good to know.
 
Nice. I’m going to have DST do mine. I can’t wait. Other than some color stuff yours is pretty much what Im about to build. How do you like the Zeus?
I have not shot this one yet... I have done some dry fire practice with it though. Hope to do load development soon. I will be shooting my 6.5 Creed tomorrow, to finish up its load development. I have a problem with having rifles built. I have another already in the works...
20210414_164609.jpg
 
What I have on the phone.....minus a few.
Rifle: defiance rukus xm
284 win
Bartlien 1:9 25" light palma
Manners eh1
Trigger tech
Mdt mags
Silerco asr (still waiting on the can)

Pistol: rem xp100
338 lapua improved (Allen Xpress)
McMillan stock
Lilja 18" bbl Kirby Allen stalker contour
Don't know the brake

Both wear 3.5-15 NF nxs
 

Attachments

  • 20200906_141402.jpg
    20200906_141402.jpg
    1.3 MB · Views: 219
  • -17025232889883086030jpg.0.jpg
    -17025232889883086030jpg.0.jpg
    1 MB · Views: 194
Here is my latest addition to my collection .

Barrett 98B Tactical .308 with 16" barrel
Scope : Nightforce NXS 3.5-15x50 F1

Took it out for the first time today and it shoots great. Very soft shooting . Ergonomically , it fits me very well and has an exceptional trigger . The bolt lift is stiffer than my AI AW, but I am guessing it will get easier in a short time . It also weighs significantly less than my AIAW. The magazine is arguably better than the AIAW, I really think Barrett magazine is near the top of its class.

I replaced the stock Barrett muzzle brake with a Silencerco ASR muzzle brake as I will be running this rifle with a Silencerco Saker 7.62 ASR.

I traded a Colt/ Cooper M2012 for this rifle an I have no remorse whatsoever except that Euro Optic recently blew out some MRADs at heavy discount and I might have preferred an MRAD.


9543f73a2ab24a0aebd097b6a4e4cce4.jpg



Sent from my iPad using Tapatalk
Beautiful weapon. Long been a fan of 16-18" barrels
 
  • Like
Reactions: onethousandmeters