Re: precision rifles... show em
bueatiful guns bro's, keep the porn flowin
cory
bueatiful guns bro's, keep the porn flowin
cory
- Thread starter redneckbmxer24
- Start date
Re: precision rifles... show em
Here is my latest toy.
Remington 700 Long Action
AICS 1.0 Chassis system
Pac-nor 28 inch 3 groove 1-8 twist SS Super Match
Badger Ordanance recoil lug.
Taylor firing Pin with blue shroud
oversized badger knob
Jewell trigger
Strap on cheekpiece from brownells.
IOR Valada 6-24x50 35mm scope ill Mp-8 Reticle
IOR 35 mm rings.
Farrel LA 20 moa base
wheeler bore bubble.
Patches you see (on barrel) are for the sinclair's mirage band
Caliber---for those who don't know me by know 6.5x55 SE.
Breaking her in hopefully tomorrow or sometime this week...been hot and sticky!
http://www.imagestation.com/album/pictures.html?id=2124590758
Here is my latest toy.
Remington 700 Long Action
AICS 1.0 Chassis system
Pac-nor 28 inch 3 groove 1-8 twist SS Super Match
Badger Ordanance recoil lug.
Taylor firing Pin with blue shroud
oversized badger knob
Jewell trigger
Strap on cheekpiece from brownells.
IOR Valada 6-24x50 35mm scope ill Mp-8 Reticle
IOR 35 mm rings.
Farrel LA 20 moa base
wheeler bore bubble.
Patches you see (on barrel) are for the sinclair's mirage band
Caliber---for those who don't know me by know 6.5x55 SE.
Breaking her in hopefully tomorrow or sometime this week...been hot and sticky!
http://www.imagestation.com/album/pictures.html?id=2124590758
Re: precision rifles... show em
geez, nobody has said thats a funny looking "gizmo" on a Remington
geez, nobody has said thats a funny looking "gizmo" on a Remington
Re: precision rifles... show em
I just figured that you were trying to keep up with us Savage boys
.
:beer:
-Kevin
I just figured that you were trying to keep up with us Savage boys
:beer:
-Kevin
Re: precision rifles... show em
Hi,
Unique-Alpine TPG1
- 6.5x55-Swede (1:8") with brake
- 6BR-Norma (1:8") switch barrel
- Leupold Mark4 LR/T 8.5-25x50mm M1
- Mark4 rings
- Harris bipod
Not a field rifle (18lbs!) for sure, but very nice for paper-punching and LR stuff.
Will pop it's cherry this friday
jim
Hi,
Unique-Alpine TPG1
- 6.5x55-Swede (1:8") with brake
- 6BR-Norma (1:8") switch barrel
- Leupold Mark4 LR/T 8.5-25x50mm M1
- Mark4 rings
- Harris bipod
Not a field rifle (18lbs!) for sure, but very nice for paper-punching and LR stuff.
Will pop it's cherry this friday
jim
Re: precision rifles... show em
B. Harvey,
Is that a front sight block I see mounted on the front of the Hart barrel on the Rem 700?
If so, is it screwed on, mounted with a barrel band, or is the block dovetailed into the barrel?
Who did the work?
Nice Stick.
Don
B. Harvey,
Is that a front sight block I see mounted on the front of the Hart barrel on the Rem 700?
If so, is it screwed on, mounted with a barrel band, or is the block dovetailed into the barrel?
Who did the work?
Nice Stick.
Don
Re: precision rifles... show em
In between working on rifles for others, I have finally finished two of my own.
The OD rifle. .308 weight 16lbs
Remington short action. All metal work done by me.
McMillan A5 standard fill
Tubbs recoil lug.
#7 Shilen SS Super Match 1-10, 24”
DD Ross bottom metal.
Pillar bedded in Steel-Bed
TPS rings and 0-MOA base
Factory trigger 2.5 lbs
NSX 5.5-22x50 with NP-R2
Harris BR swivel bipod
Norrell Moly in black.
Desert rifle .243 weight 16 lbs
Remington short action. All metal work done by me.
McMillan A5 standard fill
Tubbs recoil lug.
#7 Shilen SS Super Match 1-14, 24”
BDL bottom metal
Pillar bedded in Steel-Bed
TPS rings and 0-MOA base
Factory trigger 2.5 lbs.
NSX 5.5-22x50 with NP1-RR
Harris BR swivel bipod
Norrell Moly in tan
Now I just need to find the time to shoot them.
In between working on rifles for others, I have finally finished two of my own.
The OD rifle. .308 weight 16lbs
Remington short action. All metal work done by me.
McMillan A5 standard fill
Tubbs recoil lug.
#7 Shilen SS Super Match 1-10, 24”
DD Ross bottom metal.
Pillar bedded in Steel-Bed
TPS rings and 0-MOA base
Factory trigger 2.5 lbs
NSX 5.5-22x50 with NP-R2
Harris BR swivel bipod
Norrell Moly in black.
Desert rifle .243 weight 16 lbs
Remington short action. All metal work done by me.
McMillan A5 standard fill
Tubbs recoil lug.
#7 Shilen SS Super Match 1-14, 24”
BDL bottom metal
Pillar bedded in Steel-Bed
TPS rings and 0-MOA base
Factory trigger 2.5 lbs.
NSX 5.5-22x50 with NP1-RR
Harris BR swivel bipod
Norrell Moly in tan
Now I just need to find the time to shoot them.
Re: precision rifles... show em
Hi B.H.
Thanks... That little BR50 22-LongRange is sweet too, haven't seen anything like it around here at all. Do they still make them that you know?
jim
Hi B.H.
Thanks... That little BR50 22-LongRange is sweet too, haven't seen anything like it around here at all. Do they still make them that you know?
jim
Re: precision rifles... show em
GAP
6.5-284
27" Schneider w badger brake
McMillan A-5 w saddel cheek desert camo
Badger knob
2.5lb factory trigger perfectly tuned
Leupold 6.5-20 Mk4 MD
TPS rings and bases
All metal in tan
GAP
6.5-284
27" Schneider w badger brake
McMillan A-5 w saddel cheek desert camo
Badger knob
2.5lb factory trigger perfectly tuned
Leupold 6.5-20 Mk4 MD
TPS rings and bases
All metal in tan
Re: precision rifles... show em
Hey Jim. I don't think it's still made. It's a 2013 action and this stock was a $500 upgrade from Anschutz. I'm the 3rd owner. I do have a friend that has one exactly like it, met him at a 22 match in Alabama. I love the rifle but would really like to get a 54.18 MS repeater.
Hey Jim. I don't think it's still made. It's a 2013 action and this stock was a $500 upgrade from Anschutz. I'm the 3rd owner. I do have a friend that has one exactly like it, met him at a 22 match in Alabama. I love the rifle but would really like to get a 54.18 MS repeater.
Re: precision rifles... show em
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by Hateca:
<span style="font-weight: bold"> In between working on rifles for others, I have finally finished two of my own.
The OD rifle. .308 weight 16lbs
Remington short action. All metal work done by me.
McMillan A5 standard fill
Tubbs recoil lug.
#7 Shilen SS Super Match 1-10, 24”
DD Ross bottom metal.
Pillar bedded in Steel-Bed
TPS rings and 0-MOA base
Factory trigger 2.5 lbs
NSX 5.5-22x50 with NP-R2
Harris BR swivel bipod
Norrell Moly in black.
Desert rifle .243 weight 16 lbs
Remington short action. All metal work done by me.
McMillan A5 standard fill
Tubbs recoil lug.
#7 Shilen SS Super Match 1-14, 24”
BDL bottom metal
Pillar bedded in Steel-Bed
TPS rings and 0-MOA base
Factory trigger 2.5 lbs.
NSX 5.5-22x50 with NP1-RR
Harris BR swivel bipod
Norrell Moly in tan
Now I just need to find the time to shoot them.
</span></div></div>Sexy models by the pool are SO HOT!!!! :firedevil:
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by Hateca:
<span style="font-weight: bold"> In between working on rifles for others, I have finally finished two of my own.
The OD rifle. .308 weight 16lbs
Remington short action. All metal work done by me.
McMillan A5 standard fill
Tubbs recoil lug.
#7 Shilen SS Super Match 1-10, 24”
DD Ross bottom metal.
Pillar bedded in Steel-Bed
TPS rings and 0-MOA base
Factory trigger 2.5 lbs
NSX 5.5-22x50 with NP-R2
Harris BR swivel bipod
Norrell Moly in black.
Desert rifle .243 weight 16 lbs
Remington short action. All metal work done by me.
McMillan A5 standard fill
Tubbs recoil lug.
#7 Shilen SS Super Match 1-14, 24”
BDL bottom metal
Pillar bedded in Steel-Bed
TPS rings and 0-MOA base
Factory trigger 2.5 lbs.
NSX 5.5-22x50 with NP1-RR
Harris BR swivel bipod
Norrell Moly in tan
Now I just need to find the time to shoot them.
Re: precision rifles... show em
It's hard to compete with some of you guys, but I'll play.
Savage 10FP .308 26"
McM A2 w/ Adj Cheekpiece
Farrell base
Leup 3.5-10x40 M1 LR w/ Gen 2 MilDot in QRW rings (because I had them)
Harris SLM bipod
Springfield M1A / M21 forgery
Arms #18 mount
Springfield 4-14x56 Govt Model 7.62 (yeah, I know
) in Burris rings
TIS sling
Modified Cherokee Cheekpiece
This is usually set up as just the bare bones M1A. And, before someone mentions it, the bipod is backwards. I'm just using the one from the Savage to hold up the front end
It's hard to compete with some of you guys, but I'll play.
Savage 10FP .308 26"
McM A2 w/ Adj Cheekpiece
Farrell base
Leup 3.5-10x40 M1 LR w/ Gen 2 MilDot in QRW rings (because I had them)
Harris SLM bipod
Springfield M1A / M21 forgery
Arms #18 mount
Springfield 4-14x56 Govt Model 7.62 (yeah, I know
) in Burris ringsTIS sling
Modified Cherokee Cheekpiece
This is usually set up as just the bare bones M1A. And, before someone mentions it, the bipod is backwards. I'm just using the one from the Savage to hold up the front end
Re: precision rifles... show em
Originally posted by John T:
[QB] It's hard to compete with some of you guys, but I'll play.
It's not about competing, it's about sharing our different approach to the perfect rifle.
I learn alot just looking at these
Re: precision rifles... show em
I know what you're saying ss. It was just an off-hand comment. The only person I really compete with is my brother. And that isn't an equipment thing either; it's all about ability, his quite remarkable <span style="font-style: italic">inate talent</span> and my hard learned, and only slightly less effective, <span style="font-style: italic">ability</span> .
I know what you're saying ss. It was just an off-hand comment. The only person I really compete with is my brother. And that isn't an equipment thing either; it's all about ability, his quite remarkable <span style="font-style: italic">inate talent</span> and my hard learned, and only slightly less effective, <span style="font-style: italic">ability</span> .
Re: precision rifles... show em
Here's mine.
Once I get all the other stuff done for it I'll post another. Right now the bolts on it's way to HD Rifles and my Leupold scope's on order.
Andrew
Here's mine.
Once I get all the other stuff done for it I'll post another. Right now the bolts on it's way to HD Rifles and my Leupold scope's on order.
Andrew
Re: precision rifles... show em
Ok I'll play here's two of mine nothing fancy,I have an other rifle at HD getting a make over and I will post when that one come in.
<ul style="list-style-type: disc">[*]Tikka Master sporter M595 SA in 308cal
Sightron II 6-24power scope with mil-dot
Savage Shooting supply <span style="font-weight: bold">TAC-POD</span>
Trigger is stock set at 3lbs breaks like
glass rod.
Action is stock, bolt is so damn
smooth.Rifle will shoot 175MK bullets
under .75moa @ 100ydr[/list]
<ul style="list-style-type: disc">[*]Brzillian Mauser model 1908 made by DWM
of Germany action is blue printed,Shilen barrel in 25-06 with 1 in 9 twist,I glass bedded the stock .
I replaced the Bolt handle and modified it with a Badgar Tactical Knob and welded and extenion on to the bolt see close up of bolt.
Installed a new Timney Delux trigger and set pull to 2.5 lbs.
Replaced the ugly bolt shroud with a Sunny Hill shroud,and installed a TUBB speedlok fireing pin and spring.
Refinished with Duracoat,camo is my design. The pattern works well in the hay fields of Western PA where I still own some property.Rifle primery use is for hunting woodchucks out to 300yrds.The rifle will shoot .5 moa @100ydrs,not bad for a Mauser.[/list]
Ok I'll play here's two of mine nothing fancy,I have an other rifle at HD getting a make over and I will post when that one come in.
<ul style="list-style-type: disc">[*]Tikka Master sporter M595 SA in 308cal
Sightron II 6-24power scope with mil-dot
Savage Shooting supply <span style="font-weight: bold">TAC-POD</span>
Trigger is stock set at 3lbs breaks like
glass rod.
Action is stock, bolt is so damn
smooth.Rifle will shoot 175MK bullets
under .75moa @ 100ydr[/list]
<ul style="list-style-type: disc">[*]Brzillian Mauser model 1908 made by DWM
of Germany action is blue printed,Shilen barrel in 25-06 with 1 in 9 twist,I glass bedded the stock .
I replaced the Bolt handle and modified it with a Badgar Tactical Knob and welded and extenion on to the bolt see close up of bolt.
Installed a new Timney Delux trigger and set pull to 2.5 lbs.
Replaced the ugly bolt shroud with a Sunny Hill shroud,and installed a TUBB speedlok fireing pin and spring.
Refinished with Duracoat,camo is my design. The pattern works well in the hay fields of Western PA where I still own some property.Rifle primery use is for hunting woodchucks out to 300yrds.The rifle will shoot .5 moa @100ydrs,not bad for a Mauser.[/list]
Re: precision rifles... show em
Kinda shabby (pictures kinda suck too)as is...but it shoots well (normally around.4-.5 MOA if I do my part, ocassionally some groups around 1/4 MOA as well) and more work will be done and I will post more pics as I have it done (suggestions on work are welcome)
Remington 700 VS in .308
Harris Bipod
SS 10X rear parallax scope
Target crown
Trigger set to 2.5 Lbs
IOR rings with Weaver 2 piece base
Kinda shabby (pictures kinda suck too)as is...but it shoots well (normally around.4-.5 MOA if I do my part, ocassionally some groups around 1/4 MOA as well) and more work will be done and I will post more pics as I have it done (suggestions on work are welcome)
Remington 700 VS in .308
Harris Bipod
SS 10X rear parallax scope
Target crown
Trigger set to 2.5 Lbs
IOR rings with Weaver 2 piece base
Re: precision rifles... show em
Well here is my humble begining:
Savage 110FP .300WM pre accutrigger
Choate US stock
8-32x44 scope
So far I have still only put one round thru it when it was stock. I hope to sight it in this weekend. I am also still debating on whether or not to camo the whole rifle, i want to but it is a scary thought to start...
Martin
Well here is my humble begining:
Savage 110FP .300WM pre accutrigger
Choate US stock
8-32x44 scope
So far I have still only put one round thru it when it was stock. I hope to sight it in this weekend. I am also still debating on whether or not to camo the whole rifle, i want to but it is a scary thought to start...
Martin
Re: precision rifles... show em
Unruely...where in WV are you and where do you shoot...Im living in princeton right now and there isn't anywhere good to shoot past 200 yds here
Unruely...where in WV are you and where do you shoot...Im living in princeton right now and there isn't anywhere good to shoot past 200 yds here
Re: precision rifles... show em
Well here's my simple(stock) stick. Still shoots better than I do! Squirreling for an A5. The bolts going to either Hateca or GAP.
Rem 700 VS 308
Badger 20moa base
Badger standard rings
Lupy 6.5-20x50 LR/T M1
Harris b/pod w/lock
Turner AWS sling
Joe
Well here's my simple(stock) stick. Still shoots better than I do! Squirreling for an A5. The bolts going to either Hateca or GAP.
Rem 700 VS 308
Badger 20moa base
Badger standard rings
Lupy 6.5-20x50 LR/T M1
Harris b/pod w/lock
Turner AWS sling
Joe
Re: precision rifles... show em
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by marine2f2:
<span style="font-weight: bold"> Unruely...where in WV are you and where do you shoot...Im living in princeton right now and there isn't anywhere good to shoot past 200 yds here </span></div></div>I'm north of you between Charleston and Parkersburg. right now I have a tough time to find somewhere to shoot beyond 200 also. i can get 225+ here at the house, but the nearest public range only goes 200, so i ma looking for a longer range right now..
Martin
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by marine2f2:
<span style="font-weight: bold"> Unruely...where in WV are you and where do you shoot...Im living in princeton right now and there isn't anywhere good to shoot past 200 yds here </span></div></div>I'm north of you between Charleston and Parkersburg. right now I have a tough time to find somewhere to shoot beyond 200 also. i can get 225+ here at the house, but the nearest public range only goes 200, so i ma looking for a longer range right now..
Martin
Re: precision rifles... show em
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by redneckbmxer24:
<span style="font-weight: bold"> <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by Luke:
High-Speed-Para: That M21 is NICE!
300Win/RumMag: Give me the details on your rig would ya?
Redneckbmxer24: I like that RRA..hows it shoot? </span></div></div>\
luke, sorry, i totally didnt see that post, i have never had a group over 1/4" at 100 with cheapo winchester white box 45's, and shoots around 1/4" at 200 with BH's 77gr loads. 1-2" st 500 yards with no-calm wind.
cory </div></div>nate, lindy, and JB, it does shoots under 1/4 at 100 with no wind, my 200 yard groups was a typo, i did have ONE 1.4" group at 200, but they are normally about 1/2", or so, my 500 yard groups average are around 2", and i have had a couple 1" groups, but that may have been luck, ill be out shooting this weekend, and ill be sure to not leave teh targets, the other ones got thrown away buy somebody, ill do some 100, and 200 yard grouping for a little proof, and post it under the range reports section, and ill try to have pics up by next early next week. no im not a troll, liar, or cheat, all these groupings were done early morning, a couple hours after sunrise, in NO wind conditions, about 70 degrees if i remember correctly altitude about 7, or 800, and if im not mistaken it was cloudy too.
cory
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by redneckbmxer24:
<span style="font-weight: bold"> <div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by Luke:
High-Speed-Para: That M21 is NICE!
300Win/RumMag: Give me the details on your rig would ya?
Redneckbmxer24: I like that RRA..hows it shoot? </span></div></div>\
luke, sorry, i totally didnt see that post, i have never had a group over 1/4" at 100 with cheapo winchester white box 45's, and shoots around 1/4" at 200 with BH's 77gr loads. 1-2" st 500 yards with no-calm wind.
cory </div></div>nate, lindy, and JB, it does shoots under 1/4 at 100 with no wind, my 200 yard groups was a typo, i did have ONE 1.4" group at 200, but they are normally about 1/2", or so, my 500 yard groups average are around 2", and i have had a couple 1" groups, but that may have been luck, ill be out shooting this weekend, and ill be sure to not leave teh targets, the other ones got thrown away buy somebody, ill do some 100, and 200 yard grouping for a little proof, and post it under the range reports section, and ill try to have pics up by next early next week. no im not a troll, liar, or cheat, all these groupings were done early morning, a couple hours after sunrise, in NO wind conditions, about 70 degrees if i remember correctly altitude about 7, or 800, and if im not mistaken it was cloudy too.
cory
Re: precision rifles... show em
Joe,
Are you authourized to show rifles next to pools? I think that HATECA is the only one authourized to do that .
-Kevin
Joe,
Are you authourized to show rifles next to pools? I think that HATECA is the only one authourized to do that
-Kevin
Re: precision rifles... show em
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by slapshot.308:
<span style="font-weight: bold"> Joe,
Are you authourized to show rifles next to pools? I think that HATECA is the only one authourized to do that .
-Kevin </span></div></div>I was thinking the same thing. :beer:
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by slapshot.308:
<span style="font-weight: bold"> Joe,
Are you authourized to show rifles next to pools? I think that HATECA is the only one authourized to do that
-Kevin </span></div></div>I was thinking the same thing.
Re: precision rifles... show em
Here is my Been there done that common Remington 700PSS in .308 with SS 10X side focus. Nothing fancy but she gets it done.
Here is my Been there done that common Remington 700PSS in .308 with SS 10X side focus. Nothing fancy but she gets it done.
Re: precision rifles... show em
Someday Ill get a good bolt gun to take pictures of. More gun porn here than I can fathom.
Someday Ill get a good bolt gun to take pictures of. More gun porn here than I can fathom.
Re: precision rifles... show em
wanted to update my post with something that I found out today...
well to start I had planned todays shooting trip for quite sometime and had bought some ammo from a guy on the site and expected it to come in yesterday...well it didnt show up, so in a pinch I picked up some winchester hunting ammo from Wally World to see what it would do out of my Remington 700VS (it's completely stock except for being recrowned...theres pics of it above on this page)
what the result was amazed me...it grouped like this all day long...I don't know if you guys will thuink it's good, but I think it's awesome that it will do that with hunting ammo
heres the pics (sorry for the size)
180 grn Winchester Power point
150 grn Winchester Power point
wanted to update my post with something that I found out today...
well to start I had planned todays shooting trip for quite sometime and had bought some ammo from a guy on the site and expected it to come in yesterday...well it didnt show up, so in a pinch I picked up some winchester hunting ammo from Wally World to see what it would do out of my Remington 700VS (it's completely stock except for being recrowned...theres pics of it above on this page)
what the result was amazed me...it grouped like this all day long...I don't know if you guys will thuink it's good, but I think it's awesome that it will do that with hunting ammo
heres the pics (sorry for the size)
180 grn Winchester Power point
150 grn Winchester Power point
Re: precision rifles... show em
Looks good to me.
Looks good to me.
Re: precision rifles... show em
my stick
my stick
Re: precision rifles... show em
Sharp pic and rifle!
Sharp pic and rifle!
Re: precision rifles... show em
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by LOBO:
<span style="font-weight: bold"> Sharp pic and rifle! </span></div></div>thank ya sir.
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Originally posted by LOBO:
<span style="font-weight: bold"> Sharp pic and rifle! </span></div></div>thank ya sir.
Re: precision rifles... show em
Here's mine,
It should look a little familiar to some of yiz Sorry Mike, I forgot to put on the sling for the pics...
Rich
Here's mine,
It should look a little familiar to some of yiz
Rich
Re: precision rifles... show em
Here's my new stick. Traded for it in this forum. I had a <span style="font-weight: bold"> <span style="font-style: italic">TBA M40A1</span> </span> and swaped for this <span style="font-weight: bold"> <span style="font-style: italic">TBA M40A2</span> </span> .
Here's a 5 shot group while doing a 'Box Drill' for scope setup.
The M40A1 I traded shot just as well..
Here's my new stick. Traded for it in this forum. I had a <span style="font-weight: bold"> <span style="font-style: italic">TBA M40A1</span> </span> and swaped for this <span style="font-weight: bold"> <span style="font-style: italic">TBA M40A2</span> </span> .
Here's a 5 shot group while doing a 'Box Drill' for scope setup.
The M40A1 I traded shot just as well..
Re: precision rifles... show em
My DD Ross Custom Tactical
**SPECS**
-Was Built On A New Remington 700 ADL Action
-Accurized/Blueprinted Rifle Action and Bolt
-.308 Caliber
-U.S.M.C. Spec. Clipslotted Action (Same as USMC M40A3 rifles)
-DD Ross Optical Platform 8-40 Base Screws (24 MOA Scope Base)
-Douglas 416R Stainless Steel, Heavy Target Barrel # 7 Contour, 1-10 twist, 20 Inch Finished Length, Recessed Crown
-DD Ross USMC Recoil Lug
-DD Ross M40A3 Heavy Duty Tactical Trigger Guard
-DD Ross 30MM Heavy Duty Tactical Rings
-McMillan Olive Drab A5 Fiberglass Stock w/ Saddle Cheekpiece, Adjustable Spacer System LOP, Pachmyer Decelerator Recoil Pad , Bipod Stud, and Push Cup Swivels w/ Six (6) Available Mounting Points (similar to M40A3)
-Hand Assembled with Steel Reinforced, Epoxy Pillar Bedding
-Factory Remington Trigger Adjusted to 3 1/2 Lb release
-Mil-Spec, Black Oxide Finish On Barrelled Action
-Terry Cross SSG Style Lightweight Tactical Bolt Knob
Rifle Has A Leupold Vari X III 4.5-14x50 LR/M1 Tactical Scope With Premier Reticles Gen 2 Mil Dot Reticle
"s6"
My DD Ross Custom Tactical
**SPECS**
-Was Built On A New Remington 700 ADL Action
-Accurized/Blueprinted Rifle Action and Bolt
-.308 Caliber
-U.S.M.C. Spec. Clipslotted Action (Same as USMC M40A3 rifles)
-DD Ross Optical Platform 8-40 Base Screws (24 MOA Scope Base)
-Douglas 416R Stainless Steel, Heavy Target Barrel # 7 Contour, 1-10 twist, 20 Inch Finished Length, Recessed Crown
-DD Ross USMC Recoil Lug
-DD Ross M40A3 Heavy Duty Tactical Trigger Guard
-DD Ross 30MM Heavy Duty Tactical Rings
-McMillan Olive Drab A5 Fiberglass Stock w/ Saddle Cheekpiece, Adjustable Spacer System LOP, Pachmyer Decelerator Recoil Pad , Bipod Stud, and Push Cup Swivels w/ Six (6) Available Mounting Points (similar to M40A3)
-Hand Assembled with Steel Reinforced, Epoxy Pillar Bedding
-Factory Remington Trigger Adjusted to 3 1/2 Lb release
-Mil-Spec, Black Oxide Finish On Barrelled Action
-Terry Cross SSG Style Lightweight Tactical Bolt Knob
Rifle Has A Leupold Vari X III 4.5-14x50 LR/M1 Tactical Scope With Premier Reticles Gen 2 Mil Dot Reticle
"s6"
Re: precision rifles... show em
heres mine, both of em
heres mine, both of em
Re: precision rifles... show em
M40A1 w/ Nightfoce 3.5-15x50mm
Rem 700 w/ Nightfoce 5.5-22x50mm
REM 700 HD Rifle w/ Nightforce 3.5-15x50mm
here is a mid range setup!
Mike @ CSGW
M40A1 w/ Nightfoce 3.5-15x50mm
Rem 700 w/ Nightfoce 5.5-22x50mm
REM 700 HD Rifle w/ Nightforce 3.5-15x50mm
here is a mid range setup!
Mike @ CSGW
Re: precision rifles... show em
well not much armalite left on it but it started life as one,LOL outside of the recievers,BCG and carbine buffer, everything else is aftermarket
presently it has a
us optics sn3 tpal 3-17
krieger barrel/w ops inc break
Daniel Defense Rail/w KAC pannels
troy BUIS's
JP adjustible gas block,
KAC trigger
vltor buffer tube
larue QD bipod and scope mount
arris swivel bipod with podloc
Sdp grip
Sopmod stock
was going to get a Mk11 but the years of waiting made me just upgrade my ten to outprefom the mk11, even with the optics its still came out less than the mk11 I was waiting on
well not much armalite left on it but it started life as one,LOL outside of the recievers,BCG and carbine buffer, everything else is aftermarket
presently it has a
us optics sn3 tpal 3-17
krieger barrel/w ops inc break
Daniel Defense Rail/w KAC pannels
troy BUIS's
JP adjustible gas block,
KAC trigger
vltor buffer tube
larue QD bipod and scope mount
arris swivel bipod with podloc
Sdp grip
Sopmod stock
was going to get a Mk11 but the years of waiting made me just upgrade my ten to outprefom the mk11, even with the optics its still came out less than the mk11 I was waiting on
Similar threads
