precision rifles... show em

[Johan H]

Thank you, it's 75% OD and 25% Black.

 

[I Am Hero]

So after getting all of the pieces scrapped together to my liking I finally got my 338 Lapua built. I had a 50 BMG but figured if I was going to be paying that much for ammo, I might as well get something a little more accurate and tamable. So I sent a factory M700 MLR 338 Lapua Police to Phoenix Custom Rifles to get redone. Here are the specs:

- Remington 700 M24 style action
- Rock Creek 1:9.4 twist barrel 29" finished, tapered to .900 at muzzle
- SAS Tactical custom muzzle brake designed after the 5 port one RWS makes
- KRG Whiskey 3 Gen 3 fixed long action chassis
- Harris Bipod (might upgrade to an atlas later)
- Phoenix Custom Rifles "Phoenix" bolt knob
- Nightforce 20 MOA base with 8-40 screws (had the raceway opened up)
- Timney trigger set at 1.5#
- Vortex match rings
- Sightron Siii 8-32x50 (may look to upgrade later and get into mil-mil instead of MOA but for now I really like this scope).
- Duracoated matte black by me.

A special shout-out to Keith Johns over as Phoenix Custom Rifles. He is absolutely awesome with his work and his communication is spectacular! He was very patient with me when I would ask a lot of questions and certainly knows his stuff and what he is doing. I would highly recommend them for any custom work; from their bolt knob installation promotion that they run, to a full blown build.

Also SAS Tactical (I found them on Ebay and just order through messages on Facebook now)..This guy has been able to create just about any style brake I can come up with for him. Great guy to work with and makes very very nice and well priced brakes.

Enjoy the couple pictures I put up!

 

[jashmore1234]

Family Picure, front to back:

GAP Crusader (USO) in .308
Patriot Gun Works (R700/McM A5/USO) in .308
Custom 10/22
R700 in Manners T4 (since reworked by PCR as .260)

What can I say, I like green.



PCR .260 after Rework

 

[toyza74]

APRS topped with Nightforce.

My newly painted APRS build Rem700 in .308 One of my prized possessions.

 

[coach4christ]

My Louisiana Precision .308.

 

[Quickdrawn]

My 700p in 338LM, the flagship.


The whole of my precision arsenal. Front to back: ar-15/223, 700 aac-sd/308 in lss chassis, 700sps varmit in h-s precision stock/308, M1A in sage ebr chassis (need a scope), my 700p in 338lm and mcree chassis, and my barrett m99 in 50bmg!

 

[Boostin500]

Savage Mod12 VLPS 308. Bench Mark barrel. Mcrees precision chassis. NF unimount. Vortex 6x24x50. Precision Armament break. Sinclair tactical bipod. And a terrible picture.

Sent from my iPhone using Tapatalk

 

[Infringed711]

Still a work in progress but so far

R700 AAC-SD
Manners T4A w/mini chassis
Nightforce F1 w/MLR2 reticle in the med NF rings it came with (probably gonna replace with a set of badger lows I have lying around)
Harris bipod


Took it to the range today for the first time and it's a significantly better shooter than me. I've never really fired from a bench before, always in the prone(which was not allowed at this range) so it felt a little awkward(also probably didn't help I was using a sock full of rice as a rear bag). Not a fan of the X-Mark trigger, feels really heavy, and I only had Prvi 168 BTHP ammo and the range didn't have any FGMM so I'm sure with a little practice, better ammo, and trigger I could get the rifle to Sub 1/2 MOA.

My best group

 

[Boostin500]

Sent from my iPhone using Tapatalk

 

[kRcu]

Updated my rifle.

Added the AICS 1.5 to try the chassis style stocks. I have had several Manners and love them , but wanted to try something new. I like the ability to not only adjust comb height, but also move it a bit to the right. My only worry with the chassis is the weight. I am wanting to do a precision rifle match soon and worry the weight will be an issue.

700 SPS Tac .308 20"
AIcS 1.5
Larue 20moa base
Seekins rings
Badger Bolt knob
Soon to have Harris bipod
Currently using Slik micro tripod with PRS SSP 2


Here is a group from the day I sighted in with the chassis first 5-shots after zero'd. 175gr HSM. 100yds.

 

[farmerbrown]

Still a work in progress but so far

R700 AAC-SD
Manners T4A w/mini chassis
Nightforce F1 w/MLR2 reticle in the med NF rings it came with (probably gonna replace with a set of badger lows I have lying around)
Harris bipod


Took it to the range today for the first time and it's a significantly better shooter than me. I've never really fired from a bench before, always in the prone(which was not allowed at this range) so it felt a little awkward(also probably didn't help I was using a sock full of rice as a rear bag). Not a fan of the X-Mark trigger, feels really heavy, and I only had Prvi 168 BTHP ammo and the range didn't have any FGMM so I'm sure with a little practice, better ammo, and trigger I could get the rifle to Sub 1/2 MOA.

My best group

You should be very happy with that, the Prvi ammo isn't exactly world-class...

 

[Phishman84]

Here's my Savage 10FP:
Bell & Carlson Medalist Stock
Harris Bipod
Nightforce Ultra-lite Rings
Bushnell 3.5-21x50 DMR Elite Tactical

 

[0933]

http://www.snipershide.com/shooting/snipers-hide-vintage-sniper-rifles/232331-finnish-m28-76-a.html

Length: 47.5"
Weight: 13.7 lbs
Receiver: 1900 Tula Hex
Barrel: Finnish ASEV1 M28-76
Caliber: 7.62x53R
Bore: .3082" 1-9.5" twist

 

[z71rat]

Here is my latest contribution to the list... Savage Varmint/Tactical .243Win, with several changes of course.

DK

 

[jugi16]

Winter shooting in Canada! Couple yotes in 308 and 260.

 

[Calico_jack]

Savage 10p-sr .308
MDT-LSS chassis
20" 5r threaded barrel
Leupold mk4 scope
Magpul stock and grip
5rd aics mag

Sent from my iPhone using Tapatalk

 

[SepticDeath]

Rem 700 TAC, Timney trigger, B & C Medalist stock, Vortex 6X24X50

200 yard 3 shot group

 

[0311 Hesco]

^Gorgeous sticks!

 

[Gledeasy]

Finally got this one set-up. It took a while and I had to sell a bunch of other toys along the way, but come first trip to the range I'm sure it will be worth it.

AX chassis
RWS sharpshooter (Deviant)
Bartlein barrel (243)
Surefire brake
Timney trigger
Nightforce NXS
Spuhr Mount

 

[Wonko_The_Sane]

Here is a .300 Win Mag I just put together myself. Trued the action, contoured the Bartlien 1:10 blank to a MTU, and pillar bedded it in the McMillan. Sadly it still has the factory trigger in it, which is just awful compared to my Huber in my .260, but money has been tight.

This is regularly what my groups look like with some Remington 180gr accutip I had given to me. Haven't had a chance to try any specific match ammo yet, but if it does this regularly with the Remington stuff and the factory trigger, I can't wait to try some. This was 6 rounds at only 100yrds.

 

[Matt_3479]

Winter shooting in Canada! Couple yotes in 308 and 260.

beautiful rifles! where abouts in canada are you located? looks like BC/Alberta? who built your rifles

 

[Mormegil87]

Added a NF NXS 3.5-15x50 with NP-R1 reticle. Scored a smoking' deal through milehighshooters.com and had to go test it out right away. They gun and scope are better than I am. Ran some Black Hills 168gr through it and some Federal GMM 168gr as well. The Gold Medal Match was giving me 1.25 MOA and the Black Hills was closer to 1.75 MOA at 200yds. Still working out some technique issues that I have.

Looking at a getting a rear bag and a Timney trigger to try to help bring those groups in tighter as well.

 

[tui_man]

My new alround shooter to put the hunting back into shooting.

Remington 700 s/a base, trued, shimmed bolt and tac bolt handle, straight fluted bolt, lightweight firing pin assembly
(To be replaced in few weeks by my alloy action)
Jewel trigger with no safty set at 1lbs
Senator 75 carbon stock, duracoated desert tan, with a quick can matt black splash to brake it up
Bartlein 1.8", 24" carbon wrapped barrel chambered in 6mm x 47 Lapua throated to suit 105gr a-max
Carbon monocore overbarrel suppressor. also oversize size can so it just farts @ 282grams
March 2.5-25x42 tac with duplex reticle
Tally rings lapped and pinned

Its a nice 3059grams with can ready to go, will drop bit in the new action

Very happy with how's she's shooting with 105gr a-max for longer stuff at 3170fps an 85gr barnes tsx at 3340fps for the close stuff

 

[reximus]

 

[SICARIO]

My entry to the long range world

 

[spoon063]

I'll play....

 

[slayer_21420]

Here is the latest



6mmSLR
Stiller tac-30 A/W
26" brux #5 1-8"
Manners T3 W/Mini chassis
Sightron SIII 6-24x50 LRMOA

Steve

 

[Kubitza123]

My Surgeon/ Jae with 6.5 creed barrel , Proof Research 308 barrel , March 5-40x56 FFP and also have surgeon 223 bolt and 223 barrel getting spun shortly for it.

 

[diderr]

McMillan TAC-338 w/ Premier 3-15

 

[sulcop96]

My Surgeon/ Jae with 6.5 creed barrel , Proof Research 308 barrel , March 5-40x56 FFP and also have surgeon 223 bolt and 223 barrel getting spun shortly for it.

Kubitza,

Have you done any reviews on the 5-40 March yet? I have the 2.5-25x42 and 3-24x42 and was looking at the 5-40. Biggest question is the low light performance better with the larger objective? I assume yes, but figured I would ask an opinion.

Sully

 

[Mynamewontfi]

I'll play....

Awesomeness! Can we get the specs?

 

[spoon063]

Thanks.

Stiller Tac30A/W
Schneider P5. #7, 22", .308, threaded, 11 degree crown
Manners T4-A
Surgeon metal
Old rem trigger
Spuhr rings,
PM-II
Badger EFR
Etc...

 

[StaMic006]

My new 6.5 CM!

 

[308garand]

My newest project.









Savage 10P-SR (.308)
5R Rifling 18" barrel
B&C Medalist Stock
Weaver 20moa base
Model 10 brake (amazon)
Seekins Precision Low Rings
Viper Vortex PST 6-24x50 MRAD SFP
Vortex Anti-Cant Bubble
Triad Tactical Stock Pack

Awaiting:
Harris BRM-S bipod
Paint

 

[Finkers]

That's probably the first time I've seen a T3 in a McMillan stock. It looks great!

Sent from my GT-S6810P using Tapatalk

Here's another one.

First post, thanks for all the knowledge.

 

[Brasscow]

Some bolts in the reloading room.

Tac .50 is a hammer and is for sale

 

[Brasscow]

My new 6.5 CM! View attachment 32463View attachment 32464

Classy

 

[RogerCapiche]

Here's another one.

First post, thanks for all the knowledge.

Haha, thanks. I guess I'll have to get one eventually as well xD

Sent from my GT-S6810P using Tapatalk

 

[Barney88PDC]

6mm Creedmoor

 

[Mooseknuckles]

View attachment 32570View attachment 32570just got this gun all set up. its a good shooter. need to get some more time behind it and get it fine tuned. when funds allow it i am going to replace the stock and the bottom metal. might go with a chassis system instead of the stock
savage tr10 308
karsten b model cheek rest
swfa 3x15x42 ffp
tps trs low rings with egw base
aac none mount muzzle break

 

[VJJPunisher]

Any trades?

would consider trade for a TR M40A5

 

[BenTerrible]

Tinkering with these, among others...

 

[RogerCapiche]

Tinkering with these, among others...

That stepped barrel looks pretty good with that FB brake. What are the calibers?

Sent from my GT-S6810P using Tapatalk

 

[BenTerrible]

.308 win & 6.5 X 47 Lapua

 

[scatsob]

May as well whore this out here too .

 

[Mormegil87]

May as well whore this out here too .

So, very nice.

 

[Darkside-Six]

I'll play.

 

[art of accuracy]

I will try it


30-06ISM

SurgeonRLR
Benchmark 3groove 11twist M40 @ 27"
McMillan A5
Jewell Trigger
PT&G floorplate
Oldschool NF NXS 5.5-22x50 MLR

Slingin 200Hybrids ahead of H4831 in Norma Brass ..

sub .4 with SLOPPY load bench work / can get .2 when I try a bit at the bench!!!!

 

[JBM_DC]

IMG_6206 R by jbm_dc, on Flickr

Nothing special, just one more of those cheap Savage rifles.

 

[Brosome]

Just finished my rem700 AAC-SD project.