Replacement AR10 muzzlebrake suggestions please.

[jcfd2201]

I had my smith remove the factory MB since it was welded and pinned. I need to find a replacement that can be installed/removed easily for those times when I want to shoot suppressed. I ordered a thread protector but still like to use the brake at times.

Anyone have any suggestions or good results from one?

 

[KillShot]

Re: Replacement AR10 muzzlebrake suggestions please.

Primary Weapons Systems FSC30. Check it out on YouTube. I have one and the recoil reduction is great!

 

[jcfd2201]

Re: Replacement AR10 muzzlebrake suggestions please.

Thanks for the info KS!

 

[fnbrowning]

Re: Replacement AR10 muzzlebrake suggestions please.

JP Rifles Recoil Eliminator for nearly effortless shooting. I used it for awhile on my Armalite AR10.
JP Rifles Recoil Eliminator

I later decided that regardless how well the JP Eliminator functioned, that I wanted a slimmer profile compensator. I then went with the Bennie Cooley compensator. Doesn't reduce recoil like the Eliminator, but it does reduce to an acceptable level.
Bennie Cooley

 

[bluegrasspicker]

Re: Replacement AR10 muzzlebrake suggestions please.

If you're going to eventually buy a suppressor that goes over a muzzle device, you might consider just buying the break that goes with your future suppressor.

Enjoy,
Bob

 

[Hawk45]

Re: Replacement AR10 muzzlebrake suggestions please.

If you just want a standard thread on suppressor (which in of itself is a good idea as well if using on multiple rifles) then look at like the Badger FTE. It screws on but also has a clamp style securing mechanism. Back out the bolt and screw off.

 

[dlxcupid]

Re: Replacement AR10 muzzlebrake suggestions please.

Depends on how much you want to spend and what suppressor you're running or want to run. BattleComps run close to $300, Miculeks are effective and affordable for under $50. If you're gonna run say a Surefire suppressor, you should get a Surefire brake/muzzle device or whatever your suppressor brand offers.

 

[Petey]

Re: Replacement AR10 muzzlebrake suggestions please.

If you're going for a non-mount brake there are a few options. As Hawk45 pointed out, the Badger FTE is a good choice. I have one of these on a bolt gun and really like it. My second choice was the R&D Precision Rapid brake; you may want to take a look at it:

http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=2050939

 

[jcfd2201]

Re: Replacement AR10 muzzlebrake suggestions please.

Thanks for all the input. I have a YHM Phantom currently and use it on other rifles as well. I like the designs that are smaller and can be locked into place. I think I am leaning towards the Badger FTE.

 

[sgtbutt]

Re: Replacement AR10 muzzlebrake suggestions please.

I have an OPS Inc brake on my 308 and irs very affective. Muzzle rise its minimal, low recoil, but definitely a muzzle brake, its loud.