Maggie’s  What's Your View II

Buzzinga

Supporter
Supporter
Minuteman
  • Oct 19, 2020
    76
    113
    Washington State
    I hear you bro, and I thought the same thing, but look at the angle of the windows, especially the back window. The angle matches up with the model year I stated. Hard to be 100% certain though. I hate thieves and I hope this person is caught!

    EDIT: I think you're right, 2011
     
    • Like
    Reactions: OldSalty2

    2ndamendfan

    Sergeant
    PX Member
    Minuteman
    Nov 10, 2010
    5,820
    8,204
    UT
    I need your help guys, can anyone tell me what make, model or year this car is? She has been robbing our mailboxes and this is the best I have so far. Thanks




    I was thinking Toyota. Camry
    solely on the elongation of the c post from roof to trunk.

    either way.
    i know the fix.
    Contact @TheHorta about NV.

    Its a long shot, but @2ndamendfan, any ideas?
    Ford fusion, above the drivers door handle is a shadow. It looks to me like a keyless entry pad. That is a feature ONLY available on Ford vehicles.
    Will try an post a imagine of a 2010, the profile isn't quite right, so maybe look at a 2012 or newer. I will keep looking.
     

    powdahound76

    Old tired dad
    PX Member
    Minuteman
    Sep 7, 2011
    6,018
    13,638
    Denver CO
    I cant see it.

    there was a reason I asked you though.
    Probably better on my HD screen on my work computer. Those suckers are amazing!
    This phone is smaller than my, well, its small....

    i know smart people. (Looks at self in mirror with doubt....)
     

    OldSalty2

    Just salty.
    PX Member
    Minuteman
  • Aug 29, 2020
    1,220
    1,504
    Ai image searchers like 11 camry. the fusion has a squared off back seat window, the image and vid clearly shows the back window comes to a point.

    I think the crap quality and shadows playin with ya.
     
    • Like
    Reactions: 2ndamendfan

    LeftyJason

    Thumbnail-les
    Supporter
    PX Member
    Minuteman
  • Mar 8, 2017
    1,818
    2,767
    34
    Kaysville Utah
    Off the car detectives for a moment.

    At work and get an ocular migraine while I'm trying to read one of these stupid test indicators. Had to go from the 0 to the 3 (movement of 0.003" or 3 thousandths).
    20210113_202853.jpg
    Hate this style. Dial face is 1.5". Each tick mark measures 0.00005" (50 millionths).

    Much prefer this style. Same size dial but tick marks measure 0.0001" (1 ten thousandth or tenth).
    20210113_202843.jpg

    Back to the car detectives. Hope you figure it out and get things resolved.
     

    LeftyJason

    Thumbnail-les
    Supporter
    PX Member
    Minuteman
  • Mar 8, 2017
    1,818
    2,767
    34
    Kaysville Utah
    Holy shit what are you measuring? Blonde pussy hairs?
    I run a cnc grinder making parts for turbo fan jet engines. Sometimes I grind straight and some times I grind shapes closer to molding profiles. I also ground threads. From Tomahawk or agm-86 alcm cruise engines to light business jet engines. Our biggest engines are in this plane. Each of those engines a has at least 4 parts that I or my coworker machined on at least 2 operations.

    Tonight I'm running parts for a military engine and had to adjust for taper. Some of my parts are designed to spin at 30k for commercial or 80k for military. Tightest tolerance I run on my machine is +/- 0.0001" with 0.0004" runout.
     

    Badfinger

    Major Hide Member
    PX Member
    Minuteman
  • Aug 11, 2013
    1,846
    2,991
    Ohio
    Thanks everyone, your help is much appreciated this has been going on for months and it's very frustrating. We even have local police regularly using our driveway for surveillance to no avail. He / She has been incredibly lucky so far, but that will change.

    IR cameras don't work because the lights of the vehicle burn out the picture making it impossible to get a plate picture.

    What we need is a LPR license plate reading camera but it's about $800 to setup and so far I haven't lost any money.
     

    Mike Casselton

    Trunk Monkey
    PX Member
    Minuteman
  • Nov 25, 2007
    5,348
    7,716
    Lithia, FL
    Thanks everyone, your help is much appreciated this has been going on for months and it's very frustrating. We even have local police regularly using our driveway for surveillance to no avail. He / She has been incredibly lucky so far, but that will change.

    IR cameras don't work because the lights of the vehicle burn out the picture making it impossible to get a plate picture.

    What we need is a LPR license plate reading camera but it's about $800 to setup and so far I haven't lost any money.

    Box up an old iPhone with the find my phone feature turned on.
    Quick, easy and you get a trace and destination.
    Should match the whereabouts of the phone the thief carries.
     

    Nodakplowboy

    Grumpy Gramps
    PX Member
    Minuteman
    Mar 4, 2017
    982
    2,110
    It has been a above average balmy winter so far but someday it will end...20210115_070345.jpg
    Pulled the wool leggings out of storage for a quick dryer tumble and iron. Right is pure wool German surplus, left wool blend Columbia. The wool shirts are ready to go. 3 layer system, poly then wool then brown duck bibs, temp specific footwear (I have a lot of boots). After one gets all that warmth pulled on you have about 5 minutes to get outside before you start roasting.

    On a current events note, it helps to have a daughter who works in a mall adjacent to a large sporting goods store.
    20210113_153924.jpg
    $39.95 w/o taxes.
    Going under the knife for the left side knee replacement 2/1/21. By May l'll be ready to start the world on fire. Or push a 21" mower. Either will be an improvement.
     

    Waorani

    Comfortably Numb
    PX Member
    Minuteman
    Feb 14, 2017
    2,383
    3,257
    Greenbow, AL
    How do you like the atlas? Eyeing either an atlas or triumph, but steering more toward and atlas 9KBP due to a lower overall height.
    So far so good but have only lifted a couple of vehicles. Had it for 10+yrs but could never find spot in old shop where both posts would be on thick enough concrete. Bought new place last year w/ nicer shop and finally got installed. Went w/ Atlas primarily so I could pick up at Greg Smith in Atlanta and not have to deal w/ hassle of shipping. Install was easy and only change was to add longer anchor bolts. Nothing so far that would make me say don't get an Atlas.
     
    • Like
    Reactions: roostercogburn98

    Steve_In_29

    Semper Fi
    PX Member
    Minuteman
  • Jul 22, 2020
    490
    484
    St Johns, AZ
    So far so good but have only lifted a couple of vehicles. Had it for 10+yrs but could never find spot in old shop where both posts would be on thick enough concrete. Bought new place last year w/ nicer shop and finally got installed. Went w/ Atlas primarily so I could pick up at Greg Smith in Atlanta and not have to deal w/ hassle of shipping. Install was easy and only change was to add longer anchor bolts. Nothing so far that would make me say don't get an Atlas.
    Fix would have been to jack hammer a couple holes to install footers.
     

    tnichols

    Sergeant
    PX Member
    Minuteman
    Jan 23, 2010
    4,072
    7,824
    56
    Morley IA
    Yet you were the one that posted this....
    Might want to back down just a touch, considering you’re fairly new here. Glad to have you if you treat folks with respect, however, you’ve been digging on @roostercogburn98 a fair amount for no reason. He did his pull and I respect him for that. Give it a try.
     

    roostercogburn98

    Private
    PX Member
    Minuteman
    Nov 3, 2010
    2,095
    4,270
    Might want to back down just a touch, considering you’re fairly new here. Glad to have you if you treat folks with respect, however, you’ve been digging on @roostercogburn98 a fair amount for no reason. He did his pull and I respect him for that. Give it a try.
    Guys like him aren’t happy unless everyone around him are miserable as well. Sadly,I think it helps them feel more included.
    On a side note, his digging hasn’t even started a Ranger grave yet so he’s got plenty of work to go.
     

    Ravenworks

    Semper-Fi "80-84"
    PX Member
    Minuteman
  • Feb 8, 2019
    2,789
    4,658
    North Coast
    No rifle with that cigar today
    Hey I posted a picture of a monster Bug on the other page for you.
    BTW, OME has 10mm leveling disc for your heep.
    They also have some nice spring combo's with a set of custom valved Foxes you'd be set any of these keyboard Jeep warriors.
    Guy flappin his mouth like a ducks ass but never posted a picture of his stuff.139441324_4314100071956588_8777177795319541692_n.jpg