A
anachronism
Guest
Re: Which dies for a .223 in a AR 15?
I've been very happy with my std Redding dies. I load for 3 ARs, so I full-length size every time anyway. My least favorite have turned out to be Hornady. It's sad too. At one time, everything I had was from Hornady. Tips? watch your case lengths, keep them uniform.
I've been very happy with my std Redding dies. I load for 3 ARs, so I full-length size every time anyway. My least favorite have turned out to be Hornady. It's sad too. At one time, everything I had was from Hornady. Tips? watch your case lengths, keep them uniform.
Re: Which dies for a .223 in a AR 15?
For the money I would consider the Lee Collet Die set. I justs picked up the set for my SPR. Hopefully you already have your components. They are really hard to find these days.
I normally load for my remington 308 and use foster neck/bump die & RCBS match die set. With bolt action I am more concerned about only sizing the neck. With an AR you should alway use a full lengh die.
dont be afraid to ask silly questions here. Most people are pretty helpful.
For the money I would consider the Lee Collet Die set. I justs picked up the set for my SPR. Hopefully you already have your components. They are really hard to find these days.
I normally load for my remington 308 and use foster neck/bump die & RCBS match die set. With bolt action I am more concerned about only sizing the neck. With an AR you should alway use a full lengh die.
dont be afraid to ask silly questions here. Most people are pretty helpful.
Re: Which dies for a .223 in a AR 15?
I use redding full length and or neck sizing dies and forester ultra micrometer seating die with good results for both 223 and 308
I use redding full length and or neck sizing dies and forester ultra micrometer seating die with good results for both 223 and 308
Re: Which dies for a .223 in a AR 15?
Standard FL for me. If you have trouble with the FL chambering, go to a small base die. Otherwise, a FL set should do you good.
Standard FL for me. If you have trouble with the FL chambering, go to a small base die. Otherwise, a FL set should do you good.
Re: Which dies for a .223 in a AR 15?
Oh ya small base dies Redding or RCBS both do the job nicely
Oh ya small base dies Redding or RCBS both do the job nicely
Re: Which dies for a .223 in a AR 15?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pengilly</div><div class="ubbcode-body">Any prefference?
</div></div>
Its not the die (brand or kind), its the indian behind the lever.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pengilly</div><div class="ubbcode-body">Any prefference?
</div></div>
Its not the die (brand or kind), its the indian behind the lever.
Re: Which dies for a .223 in a AR 15?
I have always used RCBS dies for my AR. I just full lenght size and have never had a faliure to chamber. I put a few thousand rounds a year through those dies and not a issue. I just pull them apart and clean them after use.
I have some friends that use Reading dies and they have no problems either.
Brian
I have always used RCBS dies for my AR. I just full lenght size and have never had a faliure to chamber. I put a few thousand rounds a year through those dies and not a issue. I just pull them apart and clean them after use.
I have some friends that use Reading dies and they have no problems either.
Brian
