Hi Richard. That is a good deal sir. I am in Afton, how near to Laramie could we meet?
Cal
-
Having trouble using the site?
Contact support
Reloading Equipment Wyoming Trading Thread
- Thread starter sticknstring
- Start date
Cal
Cal,
Health right now limits me to driving about 20 miles. I regret that this isn't going to help you at all.
Richard
In my post above, I made a mistake, I still have 8 lbs ofAA2200, and Fed 210, REM 9 1/2 and cci300. I’m looking for h4350 and h4895.
Sendero, I have 6 old boxes of Hornady #2840 .284 162gr BTHP National Match bullets but they are seconds, they are probably 40 years old though. I don't need that much for them maybe $150 for all six but I'd really like to trade for some rl16 or even better some AR-Comp.
i'd be fairly keen to trade out of this 6lbs in a jug of varget i got.
most interested in xbr8208 but would entertain h4350 or another 147gr 6.5 creed powder.
most interested in xbr8208 but would entertain h4350 or another 147gr 6.5 creed powder.
Sir, I have no powder that would interest you, but I do have full 1k, full boxes of Rem 9 1/2 lr, cc400, sr, Win wsr sr primers that I would trade for your cci br4 if you throw in a couple a cups of coffee for those you've used. I live in Wheatland.
HODGDON RETUMBO POWDER | Brownells
This magnum powder was designed expressly for the really large overbored cartridges such as the 7mm Remington Ultra Magnum, 300 Remington Ultra Magnum, 30-378 Weatherby Magnum, etc. RETUMBO adds 40-100 fps more velocity to these cartridges when co...
www.brownells.com
I’m not sure I’m seeing all your post. Are you saying you have some retumbo?HODGDON RETUMBO POWDER | Brownells
This magnum powder was designed expressly for the really large overbored cartridges such as the 7mm Remington Ultra Magnum, 300 Remington Ultra Magnum, 30-378 Weatherby Magnum, etc. RETUMBO adds 40-100 fps more velocity to these cartridges when co...
this threads died out a wee bit
but i'd really like to give away a few reloading items. got an rcbs trickler, a 223 die set, and a pound or two of bullseye powder.
also have decent fair bit of brass the kids picked up when cleaning up the shooting spot here thermopolis.
looking for a jug of 8208 if anyone want to trade. have varget and rl-15
but i'd really like to give away a few reloading items. got an rcbs trickler, a 223 die set, and a pound or two of bullseye powder.
also have decent fair bit of brass the kids picked up when cleaning up the shooting spot here thermopolis.
looking for a jug of 8208 if anyone want to trade. have varget and rl-15
Does anyone have any 6.5 PRC brass for sell or trade? I am located in Rock Springs. I will be traveling to Gillette via Rawlins and Casper next weekend. Thanks!
I still have an unopened 8lb jug of aa2200 and an unopened 8lb jug of Ramshot TAC. Looking for h4350, imr8208 and ARcomp. Located around Wheatland. Thanks
Located around Wheatland and I would entertain trade offers such as h4350, 6.5Stabal, or RL16. Thanks
I have 6.5lbs left out of an 8lb jug of Superperformance I would like to sell for $200. Around $30 a pound. Willing to drive within reason. I'm located in Rock Springs Wyoming.
Possible trades would be 6.5 StaBall or H4350.
Going to post a for sale thread also. I will not ship. Face to face only.
Possible trades would be 6.5 StaBall or H4350.
Going to post a for sale thread also. I will not ship. Face to face only.
Does anyone have any large pistol primers or some 10 mm brass for sale or trade? I have a few items for trade. If you have a brick that you would be willing to part with (sale or trade) let me know. I am located in Rock Springs but traveling towards Meeteetse tomorrow (Saturday, March 19th) through Lander/Riverton. Thanks!
How much 10mm brass are you looking for? I have a small bag of range pick up that's yours if you cover shipping.
I have a good bit of Factory 10mm Ammo if that helps. I'm in Cody/Powell
I have other stuff to trade as well:
300 Win mag brass. Once Fired. FL sized & cleaned. 42 R-P +, 52 W-W Super , 31 FC
30-06 Lake City once fired brass. 50 pcs
45 ACP once fired brass. Large Primer. 250 Win, 100 Fed, 40 R-P/10 Fed
Freedom Arms mdl 83. Field Grade 454 Casull. 10” barrel. Cylinder, grip frame & ejector rod housing are polished. Maxi Mount for scope. 2-300 pcs of primed brass.
Marlin XS7 in 260 Rem. 22” barrel, “Accu”Trigger. Bases, green synthetic stock with webbing.
Arisaka Type 38. 20” barrel in 6.5 Roberts, Camo stock. Huber trigger. Scope base and RCBS dies. 100 rounds of ammo.
Turkish K. Kale 98 Mauser in 6-284. 23” Olympic Arms S/S barrel with new chamber and throat. 10” twist, sporter weight, D&T with bases/rings, Bolt handle for scope. Lee dies with Redding trim die. Needs trigger and stock.
**Worried about barrel life?? Comes with spare new take off Remington CM barrel, 22”, 9” twist, chambered and headspaced to this action.**
Turkish K. Kale Mauser 98 in 22-250. New 26” Douglas barrel. CM – in the white. #2 sporter contour, 1:13” twist. Zero throat. D&T for bases. Bolt handle set up for scope. Military trigger. Needs mag block for short case and stock.
CZ BRNO Mauser 98 action with new ER Shaw 243 barrel. 24”, CM, in the white. Some pitting on action. Needs firing pin & spring, bolt shroud, striker, extractor & collar. D & T for scope, straight bolt handle.
Turkish K. Kale 98 Mauser with new Rem take off barrel in 243. 1:9” twist. Complete metal, D&T, needs bolt bent for scope. No stock.
Turkish K.Kale 98 Mauser with new take off Remington barrel in 7-08. 23.5” CM barrel 1:9.25” twist. D&T for 2 pc base. Bolt set up for scope. Military trigger, Needs stock.
TRADED Polish WZ29 98 Mauser with new Adams & Bennet barrel in 338-06. 24” barrel, chrome-moly, in the white. Action is D&T for a 2 pc base. Bolt handle is set up for a scope, military trigger. Needs stock and Safety (or trigger with side safety). Lee dies and 50+ pcs of brass. TRADED
1 lb of Alliant Pro Reach powder
Looking for RL 26, H1000, 'Lil Gun, 130+ gr 257 cal bullets ... ??? Unloved dies and projects
I have other stuff to trade as well:
300 Win mag brass. Once Fired. FL sized & cleaned. 42 R-P +, 52 W-W Super , 31 FC
30-06 Lake City once fired brass. 50 pcs
45 ACP once fired brass. Large Primer. 250 Win, 100 Fed, 40 R-P/10 Fed
Freedom Arms mdl 83. Field Grade 454 Casull. 10” barrel. Cylinder, grip frame & ejector rod housing are polished. Maxi Mount for scope. 2-300 pcs of primed brass.
Marlin XS7 in 260 Rem. 22” barrel, “Accu”Trigger. Bases, green synthetic stock with webbing.
Arisaka Type 38. 20” barrel in 6.5 Roberts, Camo stock. Huber trigger. Scope base and RCBS dies. 100 rounds of ammo.
Turkish K. Kale 98 Mauser in 6-284. 23” Olympic Arms S/S barrel with new chamber and throat. 10” twist, sporter weight, D&T with bases/rings, Bolt handle for scope. Lee dies with Redding trim die. Needs trigger and stock.
**Worried about barrel life?? Comes with spare new take off Remington CM barrel, 22”, 9” twist, chambered and headspaced to this action.**
Turkish K. Kale Mauser 98 in 22-250. New 26” Douglas barrel. CM – in the white. #2 sporter contour, 1:13” twist. Zero throat. D&T for bases. Bolt handle set up for scope. Military trigger. Needs mag block for short case and stock.
CZ BRNO Mauser 98 action with new ER Shaw 243 barrel. 24”, CM, in the white. Some pitting on action. Needs firing pin & spring, bolt shroud, striker, extractor & collar. D & T for scope, straight bolt handle.
Turkish K. Kale 98 Mauser with new Rem take off barrel in 243. 1:9” twist. Complete metal, D&T, needs bolt bent for scope. No stock.
Turkish K.Kale 98 Mauser with new take off Remington barrel in 7-08. 23.5” CM barrel 1:9.25” twist. D&T for 2 pc base. Bolt set up for scope. Military trigger, Needs stock.
TRADED Polish WZ29 98 Mauser with new Adams & Bennet barrel in 338-06. 24” barrel, chrome-moly, in the white. Action is D&T for a 2 pc base. Bolt handle is set up for a scope, military trigger. Needs stock and Safety (or trigger with side safety). Lee dies and 50+ pcs of brass. TRADED
1 lb of Alliant Pro Reach powder
Looking for RL 26, H1000, 'Lil Gun, 130+ gr 257 cal bullets ... ??? Unloved dies and projects
Last edited:
I have about 9 lbs. H1000 and some others if you're interested - I live in Cody.
Attachments
Thermop guy here
Little man has picked up about a gallon worth of brass from the range. He’s pretty excited with a dollar to buy hooks.
Also have an older oehler chronograph I don’t need/use and some duck and elk calls as well if anyone has a use.
Should be through Cody this weekend and in the next couple towards the black hills.
Little man has picked up about a gallon worth of brass from the range. He’s pretty excited with a dollar to buy hooks.
Also have an older oehler chronograph I don’t need/use and some duck and elk calls as well if anyone has a use.
Should be through Cody this weekend and in the next couple towards the black hills.
I can't quite justify buying a Labradar, but have had the need for some sort of Chronograph. I'm over in Gillette if you're coming over this way and still have that oehler.
pm me, i will be through in the next few weeks. it's yours.
would like to offload the brass to somewhere else besides the dumpster.
would like to offload the brass to somewhere else besides the dumpster.
Similar threads
Reloading Equipment
Powder (local to MI), brass, projectiles, etc
