Zev Tech Lower / Upper AR10 Compatibility

NHPiper

Tactical Bagpiper
Full Member
Minuteman
Feb 17, 2017
1,290
403
Concord, NH
Hi guys! I have an SBRed Zev Tech AR10 that I run a 12.5” 308 barrel out of. It is a blast to shoot, literally. I have the itch to build an upper with a 18” 6.5CM. Zev is a pain and won’t sell just stripped uppers, so does anyone know if the LMT’s, KACs, Centurion, etc. would fit? You can see the fit between the upper/lower in my photos below.

Zev bought the Mega Maten line, so I would like any Mega lower could also be used as an example. They have the slant vs. curved DPMS lower to upper fit.
 

Attachments

  • 10CC7CCE-72F0-4391-ADC8-717311440D0E.png
    10CC7CCE-72F0-4391-ADC8-717311440D0E.png
    1.5 MB · Views: 32
  • 64F45566-F6E5-4E63-A2C0-9F7226F722C3.png
    64F45566-F6E5-4E63-A2C0-9F7226F722C3.png
    3.3 MB · Views: 31

Earnhardt

Supporter
Supporter
Full Member
Minuteman
Jul 8, 2018
479
108
I thought the curve pattern was called DPMS
and the slanted pattern was called Matrix?

I know...Go ahead kick my azz for being wrong....
 

FCS

Gunny Sergeant
Commercial Supporter
Full Member
Minuteman
Jun 3, 2005
2,235
568
ABQ, NM
LaRue UUK will fit on Mega MATEN lower.
Tight fit, very tight.
1279AD15-5909-414D-9C4F-9AAD3C303E7E.jpeg
2842FCA2-A6C0-4414-95E3-6BA79BE61E16.jpeg


Armalite upper almost fits but pins won’t fully go home. I have a “B” series Armalite, you’d want the “A” series. I do not have an “A” series to fit check with.
 
  • Like
Reactions: NHPiper