Anyone have hands on with these?

Obviously Tikka is Tikka but Seekins is claiming to have a smoother action and the Hit Pro m3 comes with a TT Diamond.

I am looking to buy a 223 bolt gun. Sub 2k. Generally prefer custom build but both of these can be had for sub 2k.

This gun is in great shape and has some absolutely beautiful wood as most DT11s do. I would put a guess around 750-1000 rounds on it. I got it to use but didn’t get out as much as I thought I would this past year.

Comes with the beretta hard case and all of the tools and goodies you would expect. Pull/pull triggers, 32” barrels, 12ga. Adjustable rib and comb. 14.5" LOP

cross posted on TS as well.

$8750 shipped. Only partial trades would be high and mil/mil FFP glass or a stacatto XC or Wilson project 1.

You knew it would eventually happen. But is it enough improvement from Gen1 to switch?

525 Sporting
This is one of the best feeling guns I've had my hands on. It's right handed with a palm swell. It just don't fit me like I want it to. I've shot it a few rounds of sporting clays and have really enjoyed shooting it. It's a super nice gun with some handling marks as just about any wood gun you use will have.
32" Rhino Ported barrels
Adjustable comb with the spacers and tools
Adjustable trigger
Has a kickeez recoil pad that could probably stand to be replaced, it's getting a little soft.
Gun will come with 7 muller chokes. That's about $800 in chokes alone…
2-U0
2-U1
2-U2
1-U3
Asking $2250 shipped for it

Ultra sport plus
This gun is also super nice. I've shot it a few rounds of skeet and sporting and I have the same problem with it. It just don't fit like I want it to. This gun shoots like a dream with little recoil even with the 1 1/8oz 1250s. I know, not usually what you get with a browning lol
It's right handed with no palm swell. It also has a few bumps but nothing major at all.
32" Rhino Ported barrels
Adjustable comb
Adjustable trigger
Decelerator pad on it
This gun comes with 6 factory gold ring chokes.
1-skt
1-ic
2-IM
2-F
Asking $1850 ahipped for it

I personally think the 525 is the best sporting model browning ever produced. Me being a 15 7/8" LOP, neither of these guns will satisfy that without putting a 1" plastic spacer with a 1" pad in the back of it and I just don't want to do that. I'm selling both to fund another shotgun I found that "fits" me.

I've had problems uploading pics for some reason. If there's something else you want to see I'd be happy to send whatever pics you need.
Thanks

Pat

Traded a friend for this but I’ve never used it and getting rid of stuff that just sits. It appears he put tape in a few spots so please look at included pics.

Manners TCS 700SA Americana w/ Sikes Rail and Mini Chassis $1450

Also has the extra weight and spacers in the back that will ship with it in the box.

I just found out that it is supposed to be released to theater's, in April. Anyone else heard anything about this one?

(I tried posting this from the "Movie Theater", but I dunno what happened.)

Trigger Tech Diamond single stage curved

$sold shipped

Let me start off by saying, I do not believe spotters should be using Binos in PRS22 for 300 yard targets.. I have seen to many missed calls. I speak up so they get the points but it happens more than it should. i guess a case should be made that we dont shoot over 250. I dont mind the long shots as long as we have what it takes to make the right calls for shooters.

That all being said, I do use a spotter. I would though like to step up my Bino's. Mainly for trying to read wind a little better. I fail at the wind. I look for mirage, look at the grass, tree limbs, put all that is some mental formula that I think i have, start there for a wind call and work from there. I do wonder if I stepped up Bino's so I can see a bigger picture, better glass to see things I cant see now (cheap Vortexs that seem good for the money) would it be worth the upgrade? and how far do i need to upgrade? All the way to the Pures? Or will the Zeiss Conquest be far enough? I don't mind by once cry once, but I would prefer to hit the area where I bump diminishing returns on the money. Maybe the Bushnell Match PRO's are enough..

I hunt in the East so I cant make the case for the Pures for Hunting, It really would just be for PRS22..some day maybe for Centerfire..

I wanted to ask for some Opinions before I drop the NL Pure Nuke on my fun money bank account.

Leupold Mark5HD

• 7-35x56
• PR2-Mil
• Lens Caps
• Sunshade
• Bone Spuhr throw lever
• Competition Dial and factory dial

Scope is lightly used. No scratches. Glass is pristine.
$OLD shipped

Sphur 5001 (1.18”) with Spuhr bubble level available if interested

$300 shipped

Manners stock bedded for a deviat long action $675 firm includes shipping in US

Used Gen 1 MDT Ckyepod Double pull.

$500 shipped

I recently purchased a Nightforce ATACR 4-16x42 Mil XT reticle--from the good folks at Mile High Shooting. I purchased it in "LN" Like new condition. Was sealed new in box before I opened it at home. Never mounted. Saved some $$ by buying like new...cannot tell a difference between new new and like new.

Recently laid off and need to sell this one to fund my commitment to US-Optics for a long desired MST-100.

$2199 shipped. (not considering trades at the moment)

PM for pics and or cell phone.
-Sean

Nightforce ATACR 1-8 with FC DMX reticle, dark earth color.

Great condition, well cared for. Some faint ring marks on the tube but only cosmetic, I always torque my rings to spec with fix-it-sticks.
Comes with everything pictured.

Reptilia mount available, see other listing.

$2025 shipped *Sold
Venmo or paypal

Found this in my father's toolbox when he passed. 12" when open. Wanted to restore it, but set it aside for a while, my dad and I never had a good relationship, he was an abusive asshole. Finally started the restoration today. Here's a before and after so far.



The scales are pretty rough...cracking, loose, so going to replace them. Friend of mine makes these, so have him doing a set for me.



When done, I plan to engrave the blade to say 'BE BETTER' as a reminder to never be like him.

Giraud case trimmer
Includes case holders and cutter heads for .223/556, .308, .375 Cheytac, and .50 BMG.
$500 shipped.

MissoulaZ28 reached out to me regarding a WTB post that I have for a Larue Quad rail. He doesn’t have any activity or feedback from the last couple of years, so I was suspicious.

He sent a picture and offered to sell it for less than I was offering in my WTB post. I asked for a picture of the other side of the rail and he responded with:




The picture he provided with date and username, even though I didn’t ask for it:



The place that he found that picture (Northwest Firearms from 2021):
https://www.northwestfirearms.com/threads/larue-tactical-10-quad-rail-handguard.380247/

I’m hoping to attend my first DMR class in the coming months. I’ve had training in my prior LE career, but there was a hard line… no engagement outside of 100 yards.. so basically useless. I have several nice systems, but it appears than DMR = semi auto. Looks like most classes top out at 600-700 yards.
The first two that came to mind are my recently built 6.5 Grendel’s.
18” with NightForce NX8 2.5-20x with Geissele SDE
13.9” with Steiner T6XI 2.5-15x with Geissele SDE
Both are using Craddock RTR barrels. The 18” was sub MOA with Precision Firearms 120 Scenar L right from the start. Havent shot the 13.9” yet but will be starting load development for both shortly.
I then forgot that I also have a 16” SCAR barrel with KNS DiSCARder and KDG rail in addition to the 13” that’s stays on it. The 13” has a Trijicon Credo 1-8. I have no optic for the 16” barrel. All load development has been for 125 Controlled Chaos from the 13” barrel so I’d need to load some 169SMKs and see how they do. The SCAR has a Geissele Super Scar trigger.
Which system would you go with? If the 16” SCAR, what optic? I prefer NightForce, Steiner, and Trijicon.
I’ll pick up a Kestrel and probably the Leica laser rangefinder.

Thoughts from those with experience is greatly appreciated.

Hello,
Need some ideas and input on .223 rifle build. As far as the action I'm pretty open, but would like a recommendation on something with short throw like 70 degree or so so don't have to worry about scope clearance. Barrels are a plethora and would like to possibly try a CF wrapped, but planning to run a can on it and not sure about the whole chunk of weight on the end and effect on accuracy. So input on that from ppl with experience would be great. As far as stocks.... i have a few rifle with KRG chassis of different flavors and i really like them, but wanted to try something different. Is it worth exploring Manners with DBM or just stick with what I already know. Also, I know mags are also a concern, want to not have to fiddle with mags and mag catches and such to run reliably. planning to shoot mostly 77 grain OTMS, but would probably try 80s, and 90s at some point so that leaves me to twist rate to cover those bullet weights 1/7, 1/8 and such, info for that would be nice.
And yes, i did my research on the subject before someone tells me to use search function. I just want opinions on what ppl built or use and what i might have missed from my research to compare notes or update my findings.
Thank you guys in advance.

Have an FX120i that will randomly start drifting. Can charge five plus cases, then I'm .04gr over an empty cup all of a sudden. If I leave the cup on it, it will continue to rise another .02gr every thirty seconds or so. On and on it rises till I zero it out. If I zero the scale after placing the cup on the scale, I can leave it there for days and it will stay at 0. Have to keep an eye on the scale as I charge and I always place the cup empty back on the scale before the next charge to make sure. Although I know what the scale says when there is no cup, and generally I can tell when things are not right. I simply do not trust it. I have only loaded 40 rounds with it.

I have tried a grounding wire, drier sheets, how I place the cup, how I look at it, how I touch the bench. I charge and trickle manually. I can slam the gate on the dispenser pretty solidly and it doesn't effect the scale. I can lean on it as heavy as I want with no effect. Bench is heavy, on industrial rubber anti vibration feet. The light above is LED. My last ditch effort is a UPS that filters the power. The outlet at the bench is on it's own breaker.

For those that have fixed drifting with a sinewave UPS, what did you get? Trying to keep this below $100.

Picture of the bench, not that I think it's going to help with the situation. Who knows.

Going through things I don’t need. All have been sitting in plastic for a couple of years and have some discoloration but no corrosion
1. 100 rounds Lapua 308W New primed with Fed Match Primers. Probably 109 actually number. Fully prepared for match. Cut to same length, debuted and chamfered SOLD

2. 250 plus once fired Lake City 7.62 Match cases fully prepared and ready to load. Primed with Fed Match. 90.00 shipped lower price

3. 59 Remington new 260 REM Brass primed with Fed Match Plus 20 new not primed REM 260. Total of 79 pieces
. 45.00 shipped

Used. Will come with 1” NF rings. $old

Good morning, Members!

Below is an updated list of the remaining firearms I have for sale as of 04.21.2025.

I've added a couple of firearms to the list that weren't on the previous list.

Please reach out to me for photos and further information regarding any of the items.

UPPERS

Daniel Defense DD5V1 7.62
Complete Upper
16 Inch Barrel
Keymod
$1000

BOLT ACTION/LEVER ACTION/SHOTGUN

LRK Mechanical Custom Competition .308
Remington 700 action
24” Snyder barrel w/ 1-12 twist
Pacific Tool fluted bolt w/ Sako extractor
Heavy recoil lug
Speed lock firing pin
NEAR Mfg 20MOA pic rail
Shilen trigger
Pacific Tool steel bottom metal
Robar SR90 stock w/ adjustable LOP and check piece
Load data for .308, accuracy load including tables and trajectory
Range data - yards and meters
0.25 MOA accuracy
Test targets
150 round count
Retail: $3500 build
$2500

Cooper Firearms Model 54 Jackson Game .22-250
.22-250
1/2 MOA accuracy guarantee for centerfire cartridges
AAA Claro Walnut stock, roll over cheek piece, semi-beavertail forearm
VE hand checkered grip in a cross-over multi point pattern
Hand rubbed oil finish
Pachmayr recoil pad and steel grip cap
24" stainless steel barrel
Matte metal finish
Detachable magazine, M51 Four (4) round magazine, M54 & M52 Three (3) round magazine
Fully adjustable, single stage trigger
Weighs approx. 6.3-7.75lbs
MSRP: $3395
$2750

Benelli Cordoba
12 gauge
30” porteed crio barrel
Soft top combo
5 crio chokes
Ultra-reliable Inertia Driven system
Comfort tech recoil reduction system
Grip tight Real Tree finish
MSRP: $2099
$1600

TACTICAL

HK MR762 A1
.308/7.62
16.50” barrel, 1 in 12 inch twist
Proprietary HK short-stroke gas piston
Cold hammer forged cannon-grade steel barrel
HK G28 Adjustable Cheekpiece Buttstock
Advanced Armament Suppressor Adapter
MSRP: $4200
$3500

Daniel Defense DD5V4
6.5 Creedmoor
18" Cold Hammer Forged proprietary steel chrome-lined heavy barrel
User-adjustable gas block
Superfinished and DLC-coated bolt carrier group
Buffer equipped bolt carrier
Enhanced extractor
Innovative 4-Bolt Connection System
GRIP-N-RIP independently ambi-charging handle with anti-gas
MSRP: $2900
$2500

LMT Defense MWS
Multi Caliber Semi Auto (6 barrels included)
SilencerCo ASR suppressor adapter
Upgraded trigger pin set
6.5 Creedmoor 1/9 SS, 20 inch barrel
243 WIN 1/9 SS, 20 inch barrel
338 Federal 1/10 SS, 20 inch barrel
260 REM 1/9 SS, 20 inch barrel
.308/7.62 NATO 1/10 CB, 16.5 inch barrel
7.62 NATO 1/11.25 SS, 18 inch barrel
MSRP $6900
$3750

Precision Firearms Model PF-15B
Semi Auto
6.5 Grendel
24 inch barrel
Upgraded grip, trigger, bolt release and safety lever
SilencerCo ASR suppressor adapter
Tango Down bipod
MSRP $3075
$2250

HANDGUN

Les Baer Custom 1911
Ultimate Tactical Carry 5” Match Model
45 ACP
Baer steel NM frame
Baer steel NM slide w/ front and rear serrations
Baer NM barrel w/ stainless match bushing
LBC deluxe fixed combat front/rear tritium sights
Lowered and flared ejection port
Baer Checkered slide stop
Baer extended ejector
Baer extended safety
Baer aluminum match trigger, crisp 4 lb pull
Baer deluxe commander hammer and sear
Baer tuned extractor
Beaver tail grip safety w/ pad
High checkered front strap
Flat checkered mainspring housing
Beveled mag well
Polished feed ramp and throated barrel
Custom ivory grips
Blued finish
MSRP: $3200
$2500

New never used 3-18x44 strike eagle by Vortex scope. $ Sold