Nightforce NX8 F1 Rifle Scope 2.5-20 MIL-C reticle (never used just mounted) Nightforce one piece mount
$1,900

Leupold Mark5HD

• 5-25x56mm
• 35mm Tube
• PR2-Mil reticle
• Leupold Competition Dial and Factory Dial included
• Lens Caps
• Leupold Mark4 “High” Rings
• Vortex Bubble Level
• Sunshade

Excellent condition, only used at a few matches. Comes with box and manual

$1550 shipped

Selling my Terminus Zues QC action. Round count around 400 rounds. Trigger not included asking $1,450 shipped to your FFL

Was putting together a list of best BCG’s for the money for a buddy of mine. Here’s my list, I'm curious what everyone else likes.

In general for the finish/coating I try to stick with full chrome or phosphated with chrome plating

My picks:
MicroBest Phosphate+ BCG (has sprinco springs & OKS screws) ($92) or MicroBest Premium All Chrome BCG (has sprinco springs and OKS screws) ($120)

• Best value phosphate/chrome lined BCG:
  • SOLGW Phosphate BCG ($140)
  • SOLGW OKS Enhanced BCG (has sprinco springs & OKS screws) ($195)
  • Sionics Phosphate BCG (has sprinco springs & OKS screws) ($160)
  • AO Precision ($95)
  • Microbest Phosphate+ BCG (has sprinco springs & OKS screws) ($92)
  • Rosco?
  • KAK?
• Best nitrided BCG:
  • Rubber City Armory M16 BCG (Alt Link) ($190)
  • Microbest Nitride+ BCG (has sprinco springs and OKS screws) ($110)
  • Toolcraft Nitride BCG with 158 bolt ($110)
• Best all chrome:
  • MicroBest Premium All Chrome BCG (has sprinco springs and OKS screws) ($120) (Alt Link (Blem) ($120)
• Best DLC:
  • Microbest DLC BCG (has sprinco springs and OKS screws) ($145)
• Best NP3 BCG:
  • Sionics NP3 BCG (has sprinco springs & OKS screws) ($230)
  • FCD SBCG (has sprinco springs & OKS screws) ($262)

Zero Compromise Optic ZC840 8-40x56 Riflescope MPCT-3X 10 MIL Locking Turret​

Who deserves a cut of my money? This is the most expensive regular optic (non night vision etc.) that I'll have purchased so feel free to talk me out of it if you can.

Thanks

Not looking to sell right now wanting to trade for:

Rimx or Vudoo barreled action preferably with straight taper barrel

Specs: 22creedmoor barreled action 112 rds on it
-Kelbly atlas light 90 degree
-18” preferred barrel 1:8” twist shoots 80gr bergers at 3110fps in tight groups (3rd group attached)
-rcbs fl die set
-alpha srp brass (somewhere around 30-50rds)

Will my keep trigger you can keep yours

I see there are people will send their scope in to get modified so the turret is non-locking, this always puzzles me.
Can't we simply unlock the turret and leave it unlocked? This way you will always have the flexibility

Terminus Zeus Short Action QC with 18” M24 contour 1:10” twist 308 barrel by Deep South Tactical.

Most places are Backordered on these QC actions.

PayPal Accepted

Package $SOLD

Have a Vudoo 360 with 22” 1.20 straight bartlein barrel. It is in sniper gray. This is one of first offerings of the heavy barrel! One of best shooting vudoo I have owned! Sold one last year with the 24 inch barrel that shot just as well! Not a mark on this gun! Only reason I kept this one was because of the color! 24” was stainless! Comes with one mag. Ffl must receive shipment from private shipper! 2000 shipped.

Gay Pride Month in 2 days. Oh joy.

These agencies are on a roll lately

Apparently no one cares anymore

This is a catch and release! Bergara B14R built by Jonathon at Modacam. Got this recently from a hide member and he had targets from lapua test center that were very good! He purchased this from fred at bison tactical! It has 24 inch 1.20 straight benchmark 1:16 twist barrel! Area 401 rail and area 401 extended bolt and knob. Also has Eric Cortina bolt shroud! have way to many of these 22lr rifles and need to start selling some. Selling for what I paid! 1300 shipped. Ffl must receive shipment from private seller!

Someone out there has to have a setup close to this SA zues in a Grayboe pheonix 2.0. Had this made and I never use it. It’s pretty slick so I thought I’d see if someone out there happened to have a similar set up.
Holds 2 bolts and 2 24” barrels, room for a can, mags and other accessories as well. You’ll likely need to trim it for your scope. Custom made by “GunFoam”, Fits a vault 700. This is for foam insert only. Looking to get $125 TYD, I believe I paid $225. $250 for the vault 700 and foam

This is brand new and is their universal SA inlet.

SOLD

Thanks

Selling a a RRS TFC 24L tripod (ball head not included). One scratch on one of the leg joints. $750 shipped, selling to fund a new USPSA build

Recently received this scope brand new. Mounted, shot 6 rounds and realized I’m probably not going to use it and my brakes and shocks are smoked on my truck.

The glass is phenomenal. Pass it on to someone who will appreciate it. Currently in some Hawkins 34mm rings(lights, 1.27” H) which are included. Come with original everything, tenebrex and sunshade. Will update pics tomorrow.

$1500 shipped via Venmo or Zelle.

Like new 16” 308 chrome lined LMT MWS quad rail upper. Complete factory gun with the factory torque wrench and 2 new Pmags. Round count is under 500.

2450 - $2300

Trijicon ACOG 308/762 BDC tritium is very faint light but the etched reticle is fine. Very light use on this old work horse.

500

Package deal 2650

Looks like you guys got Carney. Sorry boys and girls.

Selling ZCO 5-27 mpct2 with sp6001 spuhr mount. Has some scuffs due to wear. Just got it back from ZCO and they checked it out and upgraded the elevation turret to non-locking. ZCO gave it a clean bill of health. Won’t sell the mount until the scope sells. Asking 3,600 shipped.

Recently re-acquired this rifle back after selling to my buddy as a back up for his Gen 1. Likely has less than 3k rounds since I didn’t shoot it a whole lot, and neither did he. 20” MTU Ace barrel threaded 1/2x28 with thread protector, 90° action, will come with a Bix n Andy Tacsport single stage trigger.

Foundation Centurion purchased from a user here. Fits both Rim X and Vudoo as confirmed by Foundation. It is the light fill. Has some silicone residue in the holes in the forend as the previous owner had weights in them. Hawkins M5 DBM with the long latch installed for feeding. Full length aluminum arca rail. 12rd aluminum magazine.

Prefer to sell as package but if I have a buyer for the barreled action and the stock, will part out that way too.

Whole rifle minus optic rings and suppressor: 2400 shipped

Barreled action with magazine and trigger: 1500 shipped

Foundation with bottom metal and arca rail: 950 shipped.


If you are interested in the whole rifle with the K318i, I can cut a deal on that too.

Open to offers.

I have a Christensen arms mpr Competition rifle in 308. Bought it today and slapped a scope on it that didn't have a home (votex viper pst 2) and some medium pmr rings and was ready to go for tomorrow to test it out. As I was starting to clean the rifle I noticed the objective lense barely clears. Like so close it's insane. As I looked however the barel is free floated the entire way down the stock forend and upper (rail? Idk what the hell it would be called) My question is due to the barrel not touching any of the upper and lower forend does it matter that the objective is damn near touching the upper section of the forend? Any help guys would really be greatly appreciated. Attached are a few pictures I did the best I could to get them a few minutes ago.

Clean Tangent Theta 5-25x56 for $3650.00 shipped and insured.

Purchased just over three years ago from hide member 1963Vette, has lived on sons 6.5 deer rifle ever since. Came with a scratch on the bell that is shown in the photos.

Happy to jump on a facetime call with any potential buyers.

I started a new SH 100yd challenge thread HERE and was asked about a 50yd rimfire version. Idk what I'm doing but here is the target I was able to make. If you print at 100% scale the final row should print 1" diameter circles and make it a little easier to score.

Rules:

1. All Targets will be shot from a Bipod & Rear Bag

2. Enter as many times as you like

3. Post your target, scored version please.

4. ColdBore means - Your first shot of the day, no exceptions.

5. Target will be shot at 50 yards or 50 meters depending on your range.

6. Lowest score wins

7. Include a Quarter with the image of you absolutely can’t score your own target and someone will likely help you.

8. Bullet just has to break the line to be counted as in the circle

Order of Shots

1. Cold Bore Shot; +1 on first target
•2 Shots touching center dot, 0 points,
•2 shots on target 1 point
•1 shot on target 2 point
•miss the circle with both shots 3 points

2. Zero Target to fine tune your group.
•5 shots at this target IF you need it. NOT PART OF THE FINAL SCORE.

3. 1st Dot Target - Single Shot
•Eliminate white dot 0 points
•Touching Black +1 point
•Miss Black +2 points

4. 2nd Dot Target - Single Shot
•Eliminate white dot 0 points
•Touching Black +1 point
•Miss Black +2 point

5. 3rd Dot Target - Single Shot
•Eliminate white dot 0 points
•Touching Black +1 point
•Miss Black +2 point

6. Three Remaining Targets - 5 Shots EA
•Measure group size, add to score
•Groups outside the circle add 1 point to group average (example, .5MOA group outside the circle = 1.5)
•All bullets just have to break the line to be considered "In"

Copy/Paste data below

Score:
Username:
State:
Rifle:
Caliber:
Ammo:

Lowest score wins!