Good Essay on the message in this 1993 movie and how it relates to current times.

Login to view embedded media

Manners EH1A 700rem SA stock. Right handed in gap camo. Has a mini chassis and integrated bottom metal. Has been lightly contoured to fit a proof barrel. Front picatinny rail and two left side flush cups. Great stock just went lighter for my hunting rig.

$1000. PayPal or Venmo (friends and family or buyer pays additional fees). Prefer to deal locally but can add shipping at buyers cost.

Hi all,

Getting back into the LR wagon and I've been eyeing the Bergara B14 HMR 6.5 Creedmoor among others that would be of similar quality and cost. What do they typically go for used?
Thanks for the help.

I have for sale a Manners NS SA, Mini Chassis that is in excellent condition, will come with the NV bridge, and a Hawkins M5 bottom metal.

$1625 shipped (lower 48)

Bought it off a member here, took it to the range once. Come with two weights in the arca rail, mini chassis with bottom metal, buttstock weight, etc. The color is Swamp.

$1300 shipped. Apple Pay or PayPal F&F or you pay fees

This was on a small frame gasser with minimal use. Mainly used for non-shooting demo. There are small marks on the turret but tracks great with glass in great shape. Will ship in original box with sunshade.
Asking $1100 shipped, Venmo F&F only

I'm looking for a decent cleaning rod to clean a Stainless 22LR Lilja barrel, chamber and lead. Just something I can safely clean without worry of harming the bore / chamber. This is a CZ 457 and I have a bore guide for it. Thanks!

Nightforce ATACR 4-16x42 F1 Tremor 3 reticle. Like new, never shot. Can include a Nightforce mount for nominal fee.

Asking $2400 or shoot an offer.

Login to view embedded media

Another corrupt MI prosecutor with help from the MI State Police arrested , manufactured evidence, and kept a man locked up in solitary for months - McMasters has been awarded $60 million.


No word on if the pigs and prosecutor who manufactured a case against him will go to prison. Probably not ; cause hard job and such reasons .

MDT Ckyepod Triple Pull

SOLD

Looking to sell my ZCO 840 MPCT1X 10 Mil NLE. Has the normal wear and tear on it as it has been shot at PRS matches. Still works perfect. I had a concern about zero shift once and sent it in to ZCO and it came back with a clean bill of health and was used when I got 9th place at Twisted Barrel Scorcher. This thing has sat in an Area 419 mount with proper torque its whole life.

** Well I have enough people reaching out asking me why in the world would I sell a ZCO, figured I would answer it here. Honestly there isn't a good reason. I also have a K540i and shooting them side by side they are just so comparable. I believe the reticle is better in the ZCO but slightly better FOV, parallax adjustment and ever so slight image quality has me wanting to keep the K540 and sell the ZCO.

Asking $3800 as that seems appropriate with the current availability. No trades.

**SOLD**

From Instagram. Sounds like Otter Creek got smacked with a sense and desist by PTR/Centre Firearms who claim to have patented 3D Printed Cans.

We have a few new site updates planned and would like your feedback and help testing them! We’re going to keep the updates under wraps for now, but we’ll be announcing them soon after we get your input!

We’re currently looking for 20 volunteers to help test out these updates, if you’re interested comment below and I’ll email you access information. Thanks in advance!

Looking for an OG lite fill. Open to buying some bags for PRS. Send me what you have.

I have an early sn Origin short action I’m trying to stuff a 300 wsm in. It works, but the feed ramps slightly over hang the box on my Hawkins magazine, causing the bullet tips of the 2nd and 3rd round to hang up under the lip. I sent the pictures to Ray at Zermatt and he recommended machining the feed ramp to be behind the box just a little. He knew of others who had done this and it fixed their feeding issues.

I have a drill press and could pick up a x-y vise. I don’t need to take much off and I would proceed slowly. Could I set it up to basically run the ramp into the side of the bit and shave off a little, or is that a bad idea? Should I set it up with the action in the correct spot and try to lover the bit and count the radius? Also, what end mill bit would you use? I suppose I could use a sanding drum for a cutter and go slow that way too. My only other option is a Dremel and I’m not doing that to my Origin.

Thanks!

For sale razor gen 2 in mils comes with sunshade, tenebrex covers and throw lever. If you want the rings that will be a additional 200 bucks.

1550 shipped

PayPal friends or family or u pay the fees or venmo

BLUF: CDG with PVA 25x47 having failure to fire 7-12% of the time.

Potential causes I can think of:
1. over pressure on load causing black primer strikes (see photo) melting primer material on to firing pin.

2. Pivoting feature on CDG bolt? Haven’t tried non pivoting, running a TT Special at 1lb 2 oz. I’m only aware that running a light trigger (TT Diamond etc) can cause issues but I don’t know what type.

3. Firing pin assembly issue? This failure to fire isn’t consistent. It is almost always after I get a pierced primer or black primer strike (see photo) if I’m calling it the wrong thing. I can’t see any issues on the surface of the firing pin but maybe.

Background:
90-92 degrees out but also had this issue when it was approximately 80 out.

Load: Berger 135 long range hybrid.
Shooters world precision at 37.4 gr with both cci 41 and 400s.
H4350 at 40.4 gr.

I have been above both of those load numbers by about .4-.5 and felt a little tougher bolt lift and backed it down. Even at the higher chargers this issue wasn’t consistent.

Any ideas as to the root? I appreciate it. Going to reach out to ARC as well


The photo with the 2 metal dots in front of the piece of brass is from when a black primer strike happened and it came out with the firing pin or got stuck in the flash hole of the bolt head.

The photo of the 2 pieces of brass is the metal not coming completely off of the primer with the firing pin.


This load was consistent with an SD of 4.8 for SW and 6.2 for H4350. I think that rules out a random higher charge causing it.

Nearly 2.5 MILLION people have signed a petition supporting the ftard illegal alien responsible for the deaths of 3 people when he tried an illegal u-turn on a highway.

I watched the in-cab camera of this guy as he was trying this idiot u-turn. His expression does not change one bit as he realizes that something has just hit his trailer.

Unbelievable

Anyone ever seen the reticle break on an USO MST-100?

I've sent an email, but since it's Sunday I know I probably won't hear back for a few days. Just curious if anyone has any firsthand experience and whether they can/will fix it?

Pic attached - it broke right below the bottom mil-dot on the lower vertical crosshair. Mounted to M40A1, 330 rounds through it, no abuse.

Steiner T6Xi 3-18x54 Scope in excellent condition. Locking turrets, never-lost indicators, illuminated reticle

SCR2 reticle. Includes Scalarworks SW0710 mount, 1.54"H, and Steiner flip covers

$1500 shipped conUS, PPFF. Add 3% for G&S

BNIB. Never opened. 7-35x56

$3000 shipped

I have a new hunting/field rifle I'm putting together. Defiance classic aw cut action, 2x 20" barrels in 6cm and 65cm. Likely using the spare mdt crbn stock. Gonna use a mdt adjustable latch dbm. I'm gonna machine all the excess aluminum that sits below the stock line to clean it up for true flush fit.

I want to use AW mags, so has anyone ever shortened an AW mag to say 5 or 6rd capacity, and re-tig welded the base plate back on?

For sale is NF ATACR 7-35x56 in MIL-XT reticle. Sun shade, NF tool and scope caps all there in the box.

Scope is used but in excellent shape being used during NRL22 season on a V22.

Asking 2800 tyd. Not interested in trades.

PP F&F or zelle.

Snag her up so I can get another optic. Cash is king, the only trades are higher mag optics with T3/T5 reticle (Atacr/ZCO/S&B only for the most part)

Zelle/venmo or check only.