Filter

Arizona BLM Shooting

Looking to commission some gassers and zero a couple bolt guns and work off the tailgate of my truck. Of course I was looking at Rio and Ben Avery etc. to do so also. But would rather visit them with dialed in rifles I think?

I’ve seen some conflicting information regarding fire restrictions around Tanto Natl Forest land per the land management website. A lot of the BLM areas for that matter.

Not asking for anyone’s spot but maybe a tip or two would be cool. Attached is where I was looking via ON X.

North on 17 and around Queen Creek looks like I’d be more likely to see offroad traffic.

The areas I’m familiar with around Tonopah seem to be filled with more permanent residents.

Thanks in advance.

Attachments

  • IMG_3090.jpeg
    IMG_3090.jpeg
    2 MB · Views: 32

Parallax and focus not same on Razor G3

Just curious if others have seen this. At the range yesterday with my new Razor Gen3 and had targets at 400 yards. Set parallax to 400 and it was removed, dot didn’t shift as I moved my head.

But image was not crisp. If I turned parallax knob to best focus, I was on about 120 yards and yes dot did move so parallax was not removed.

Not a huge deal when parallax set correct but would still prefer the crispest image possible when set properly
  • Like
Reactions: Alcanino

SOLD Accuracy International in Vision Chassis

Have had this in my safe and decided its time to sell it. This gun has been flawless and a joy to shoot just have to many other projects at the moment. Includes the following:
Accuracy International action
Accuracy international Comp trigger-purchased one of the first ones and have put 1000's of rounds through it without a single issue.
Includes 308 bolt face bolt and small firing pin
Vision Chassis with full bridge
Vision aluminum grip panel with thumb rest
AI Bartlein 26inch 6BR Barrel-approximately 2,000 rounds
AI Bartlein 16 inch 6br Barrel-Approximately 2,000 rounds
mdt grip
Folding stock adapter
This does have the quick change barrel
This has been used and shows signs of use, but functions perfectly.
Price is $3350 shipped, buyer covers any payment fees. No trades at the moment

Attachments

  • DA2AFEB7-E738-4B27-A0E4-025F9A798A4C.jpeg
    DA2AFEB7-E738-4B27-A0E4-025F9A798A4C.jpeg
    2.9 MB · Views: 304
  • 90164CD9-429C-4661-B54C-AAC3B9ECEF19.jpeg
    90164CD9-429C-4661-B54C-AAC3B9ECEF19.jpeg
    2.9 MB · Views: 308
  • 5B23B26B-050F-49ED-A120-DEE001510743.jpeg
    5B23B26B-050F-49ED-A120-DEE001510743.jpeg
    1.7 MB · Views: 274
  • E323A12E-908D-49D5-BE42-9DF1634C3AB3.jpeg
    E323A12E-908D-49D5-BE42-9DF1634C3AB3.jpeg
    1.7 MB · Views: 274
  • 7B727938-3AA2-46A1-9D9C-C21A7B444F42.jpeg
    7B727938-3AA2-46A1-9D9C-C21A7B444F42.jpeg
    1.8 MB · Views: 95

SOLD Schmidt Bender PMII 5-25x56 LP P4FL MRAD/DT/CCW 677-911-972-90-68

SOLD

Used but pristine item.

$2300 shipped and insured. Scope only with Tenebraex caps and original box.

Ships when funds received and cleared.






SKU​

677-911-972-90-68

UPC​

191992003855

MPN​

677-911-972-90-68

Exit Pupil​

10.95 - 2.28 mm

Eye Relief​

90mm/3.54"

Field of View​

5.3 - 1.5m @ 100m

Illuminated Reticle​

Yes

Light Transmission​

0.9

Magnification Range​

5-25x

Parallax Adjustment​

Side Focus Parallax 10m->∞

Reticle Position​

First Focal Plane

Elevation Turret Details​

DT (Double Turn)
0-26 mrad

Scope Finish​

Matte Black

Scope Length​

417mm/16.42"

Scope Objective Diameter​

56mm

Reticle Details​

P4LF Reticle

Scope Tube Size / Mount​

34mm

Turret Adjustment (Click Value)​

.1mRad CCW adjustment
26 mRad elevation travel
+-6 mRad windage

Scope Weight​

39.82oz

Windage Turret Details​

ST ZS CT (Single Turn; Zero Stop; Capped Turret)
±60 cm/100 m

Twilight Factor​

13 - 38.9

Item Condition​

New

Product Type​

Riflescopes

Scope Turret Rotation​

Counter Clockwise (CCW)

Don't be fooled, conservatives in U.S. are all alone.

NM judge is housing Tren de Aragua leaders in his house. They are also equipped and training others with suppressed AR15s.


All under the smoke screen that White nationalists, armed militias are terrorists groups and white conservative Maga supporters are the biggest threat to America.

They hate us, they've always hated us as grease and water don't mix.

1745417058507.png

Optics Sold****Price reduction****Athlon Cronus 4.5x29x56 mil Gen 2

As above, in excellent condition with very faint ring marks and a couple minor spots on bell and ocular, almost un noticeable. comes with box and paperwork. These retail for $1700, save tax and shipping, $965 TYD in the CONUS. Edit: APRS6 reticle

*****I see
Gratful Doug has them on sale for $1299 so I'll make this lightly used one $965 TYD insured.
1745382764099.png

1745382803591.png


1745382876457.png

1745382913370.png

1745418218927.png

1745418277964.png

Geometry question.... Angular movement

I'm old and my geometry is long gone. Weird question I cannot answer.
For sake of argument lets assume a rifle will put every round though the same hole......
What amount of movement at the bench would cause 1/4" impact movement at 100 yards? 1/16", 1/8"??
I've long forgotten how to calculate this. Maybe some of you big brain, smarter guys can tell me. Thanks.

Pistol Reloading Issue I cant figure out

So I had a bunch of 9mm loaded not too long ago. Just range ammo using some 115gr XTP that I got free from Hornaday on their free bullet promo.
Loaded up a bunch and never did anything any different than I ever have.
Had bought a new carry gun in 9mm so wanted to get to the range and shoot it.
Get there and the first mag I made about 7 rounds and the gun locks up, and I mean locks up solid.
Finally got it free and notice the round in the chamber the bullet had pushed back in the case...Kind of weird, never had it happen before.
So loaded up and shot again. Made it about 5 or so rounds and it did the same thing.
Got my other 9mm out and it happened again.
So stopped shooting and went home.
Got to looking and there were a bunch of rounds in the 100 count box that would just push back in the case.
So checked all I had done and out of about 500 rounds, about half would push back.
So checked my dies and reset them and loaded a few dummy rounds and did a push test and again the bullet would push back into the case.
Had the taper set just like the instructions said. Nothing worked right.
Probably reset the dies 5-6 different times, took them apart and cleaned them. Nothing worked.
I cant figure it out at all. I don't know if its a die issue or what.
I had some loaded from a few years ago still that were done with a RCBS die and they are all fine.

The only difference in the two is the ones I had issues with were the Hornady bullet and loaded with Hornady dies. And the others were just round nose bullets loaded with RCBS dies.


Contacted Hornady and they said I could send the dies, bullets, brass in and they would check them. But I don't understand what might be the issue.

Not new to reloading pistols as I load for 45acp, 40S&W and 357 also and have zero problems with them.

Anyone by chance have any ideas?
  • Like
Reactions: Threadcutter308

16 deputies arrested in one county so far this year .

Charges include sexual assault , assault , DUI and false arrests

Login to view embedded media
And they kept an innocent man in cuffs in a cell for 14 fucking hours . Because he was standing on the side of the road .

Bearx could County TX

Is this how it was in the good ol 1950’s ?

He didn’t have any face tattoos and wasn’t part of a protected class so they went full retard on him . Good tho g he didn’t have a dog or a woman with him .
  • Sad
Reactions: 91Eunozs and theLBC

The lawsuits are starting



All the folks across the nation that have been arrested for DUI while 100% sober so the pigs could get free pizza are starting to sue the municipalities that unlawfully arrested and charged them with crimes they were 100% innocent of . And the tax payers will foot the bill . And suddenly for no reason at all folks fucking hated them