Nightforce ATACR 4-16x42, Zero-stop, model C552. Has only been shot on a custom 6.5CM Sig Cross for less than 100 rounds. Only blemish are the ring marks from A419 raw aluminum on the scope body. Glass is perfect. Comes with scope caps. Original box included. Asking $1675 shipped and insured with signature upon delivery.

She had a her cataract / glaucoma surgery yesterday. Then we have to worry about her Macular deaeration. Yep, right at 75, my little Ms Sure Shot, has every eye issue you can have all at once.

Anyway, she wakes up this morning and checks out how her eye looks and discovers she has no real vision this morning in the eye they did surgery.

So, to try to make the best light out of what is a really worrisome information

In December 2023 I became Dead Eye Dick.

Since Dick is the nickname for Richard

I suppose my love shall now be known as

Dead Eye Richelle.

Richelle is the feminine form of Richard.

MPA BA comp chassis for Remington 700 or clone, short Action. Its got some dings from use. OD green. $575 shipped and insured.

I just bought this mount and hope to use it, but its real close to the rail, not barrel. Since its mounted on a swan rail, the height feels perfect when I'm looking through it.

I plan to shoot it tomorrow to see if there any shifts in a few positions.

Thoughts?

Hey Hide members,

I’m putting together a dedicated 300 Norma for ELR and long-range steel work — mostly prone shooting, with the goal of pushing consistent impacts past a mile. Weight isn’t a concern; I’m prioritizing stability, precision, and long-term performance.

Here’s the build so far:

Build Specs:

• Action: Kelbly Prometheus Magnum Long Action
• Barrel: 32” Bartlein MODBB, 1.25” straight contour, 5R rifling, hand-lapped, 1:8 twist (non-fluted)
• Muzzle Brake: EC Tuner Brake Gen 2
• Trigger: TriggerTech Diamond Pro
• Optic: ZCO 5-40x56 or Vortex Razor GEN III 6-36x56 MRAD. Probably go the vortex route snd save $2k.
• Mount: Area 419 One-Piece 36mm, 20 MOA built-in
• Chassis: Undecided — leaning toward MPA Matrix Pro II or Vision chassis or MDT ACC Elite (need weight tuning options, balance, and recoil control)
• Intended Use: ELR steel, occasional comps — not for hunting or field carry
• Looking at the black & acid red color by MPA or the Patriot color by Paramount Tactical for the MPA Matrix Pro II

Looking for your feedback:

1. Would you stick with the 32” barrel for 300 Norma or go shorter?
2. Thoughts on the MODBB contour vs MTU or other?
3. MPA vs MDT chassis — which has worked better for you at distance?
4. Any regrets with this action, brake, or optic choice?

Hoping to build something that stays tight past 1,500 yards and doesn’t fall apart after 500+ rounds. Appreciate any insight — especially from folks who’ve already walked this path.

Thanks ,

ShowMe-QTR-MOA

Thanks!

I have for sale an 5-27x56 Zero Compromise Optic. This scope has the 10 mil NLE turret with the IDTS marking tape with locking windage and the MPCT2X reticle. Also has an area 419 mount 1.54 high I believe with diving board. And all items in box from when I purchase new.

ZCO 527 and 419 mount $4,075 shipped and insured.

IF I have a buyer for both I'll split
$3850 shipped for scope, and scope tape
$325 for the 419 mount and diving board.

Pm with question.

$2650 TYD



Aero upper/ lower


Specialized dynamics carbon 22” 243/ aprox 300rds


Smoke composites handguard


Smoke composites stock


Smoke composites arca rail


Trigger tech diamond trigger


Jp low mass stainless bolt


Jp silent capture spring


Superlative arms adjustable gas block

Curious who here uses a small fixed blade as their everyday carry knife? What are the cons / issues you have ran into in doing so? What knives are you liking the most & why? I haven’t ever owned a small fixed blade to carry but I think I would like to give it a shot. I don’t want anything “tactical” or whatever, just a quality comfortable functional knife for daily use.

I have a ZCO 527, 10 MIL, NL, MPCT1X in good shape. Bought new from sport optics last November, (7 months old). Only has 5 or 6 matches on it. A couple of very tiny dings shown in the pictures. Glass is flawless. Well taken care of. Best reticle there is for PRS! I will also include a MPA BA scope mount that it was mounted in. $3800 shipped and insured.

***SOLD***

Mint Accuracy International AT-XC with the factory 24" 6.5 Creedmoor barrel in Dark Earth. 500 rounds on the action, no damage or issues. The list of accessories and upgrades is seen below. All factory take-off parts are included.

I prefer to sell as a complete package, but here are the purchase options. 1) Rifle with factory 6.5 Creedmoor barrel, both 6 Creedmoor and 308 Proof Carbon barrels, FDE ZCO 527 MPCT-3X w/ZCO 1.5" Block mount, $10,500 shipped/insured. 2) Rifle with factory 6.5 Creedmoor barrel and ZCO/mount $9,500 shipped/insured. 3) Rifle with factory 6.5 Creedmoor barrel $6,000 shipped/insured. Funds via discreet FF/Gift (no fees) PP or Venmo, or Zelle. I have WinTac internal weights and more magazines that can be included for extra. I will NOT sell the rifle without the factory barrel or swapped for one of the Proof barrels, so please don't ask. The rifle must sell before I part out the optic/mount.

• AI AT-XC in Dark Earth with factory 24" 6.5 Creedmoor barrel and one magazine
• Proof Carbon Fiber 20" 308 barrel (less than 100 rounds)
• Proof Carbon Fiber 24" 6 Creedmoor barrel (less than 60 rounds)
• ZCO 527 MPCT-3X in FDE, Standard Turrets
• ZCO 1.5" 20moa 36mm Block Mount with Long Picatinny Top Rail
• Area419 ZCO 527 Ranger Wrap Optic Wrap Multicam
• Hoptic Cheek Riser Pad
• Sokek Solutions AT-XC Thumbrest
• Sokek Solutions AT-X Bag Rider
• MDT Vertical Elite Chassis Grip
• PFL AI Flat Trigger Shoe

The following items seen in the pics are NOT included in the sale: suppressor, muzzle devices/brakes, SG Pulse electronic level, and bipod.

Trades considered: ZCO 427 MPCT-1X, ZCO 210 DMR or HTR, high-end double-barrel shotguns, thermal clip-ons.

While Iran and Israel don't know what the fuck they're doing, a TX grand jury sure as hell does.

Can you believe that the feds whom are in charge of immigration just roll up and arrest illegals - they seem to be not taking the bribes anymore but the local talent is angry that they can’t intercede on behalf of the invaders dispute having take their money to look the other way for the last 40 years .

They many have to resort to writing more tickets and doing more civil asset forfeiture to make up the income gap.

Hello all. I’m selling my Accuracy International ATLE 16” .308 Sniper rifle in Flat Dark Earth Color. The ATLE is an AT rifle that has the upgraded AX style stock and is only available to law enforcement. This rifle was purchased new by me from Mile High Shooting and has about 2000 rounds through it (no reloads-all factory match ammo). This one has about $500+ of extras added to include a factory AI night vision bridge/rail, full ARCA rail on the bottom, as well as an extended ARCA bipod mount. It is in excellent overall shape but does have some minor safe dings. I am an AI armorer and this rifle was completely checked a few months ago and its in perfect working order.

Also included is the factory box/manual, (3) magazines, an Armageddon Gear Precision rifle sling and a Harris bipod with the Really Right Stuff (RRS) ARCA adapter.

$4300 + actual shipping. ****SOLD PF**** I would accept partial trades in the form of a Nightforce or Leupold MK 1-8 scope. Located in the central Texas area and would be willing to drive and meet if needed. Email me at [email protected] as the PM system is not working for some reason (I’m a site supporter).

Any idea what a good solution would be for this? I know I could do the A419 system and it should fix it.

Crush washers are bad, is there anything else I am thinking off.

I can ughah ugahing the shit out of the can and it still comes loose after a few strings of fire. I assume thermal contraction is causing it to loosen up no matter how hard I tighten it. I really dont want to have to tac weld this can to the barrel if I dont have to.

5/8x24 barrel with a titanium dillegent defence HUB adapter mated to KGM R30K.

Selling a like new gen 3 razor. Bought new from Eurooptic, and upon mounting it on my Vudoo, I realized that the reticle would not work for me…far too fine for my eyes. $2600 shipped to your door. Feel free to ask any questions!

For years, we have seen even the best brands of push-button sling loops have functional issues after hard use.
The internal ball/detent is susceptible to rust, dust and sand. Even the stainless flush cups seem to get pretty jacked up with heavy use in addition to rust and corrosion leaching from the infected/affected push-button loop.

This can continue to the point that the push-button feature becomes inoperable thus either locking itself to the flush cup or alternatively not allowing a safe lockup when attaching.

In addition to the above pitfalls, your sling can become a twisted mess if you are not rocking the limited rotation feature in the flush cups.

- - - - - - - -

We all have been using HK style hardpoints on our gassers for years with none of the above issues.
I was already looking at this for bolt gun stocks and the fairly recent introduction of MagPul's Para clip made me revisit the idea due to them being quiet, quick, lockable, and non-scuff. I have been running this setup on a chassis stock for bolt gun work and have found no negatives while still retaining all the functionality of the sling utilities.

I have to acknowledge that I am a sample of one and have had limited, but positive feedback from a few that have tried it.
So. . . . I am looking for feedback from bolt gun shooters that actually still use a sling for carry or shooting stability.


I am probably going to integrate a couple of solid attach points configured to best accommodate slings with HK hooks, MASH hooks, or the Magpul Para clips on future stock designs.

Any constructive input on the Pros and Cons would be appreciated.

No wind,
T

Hello,

I wanted to try my first attempt at “bumping the shoulder” back ~0.002” when resizing fired brass rather than using the standard die instructions to size for the minimum chamber spec.

This would typically result in a longer case bottom-shoulder dimension than factory ammo by not pushing the shoulder back quite as far.

Those of you that have done this, how do you handle trimming cases? If I were to trim to the case trim length on the print, I would have a shorter neck since the shoulder is out farther. Are you guys keeping your brass just under max length and calling that good?

Kelblys just brought out a PRS rifle that once they sell 50 will meet all the production requirements. If I know anything about Kelblys the fact they have over 82 confirmed world records confirms they known what they are doing and produce quality products. They are also offering 10 percent off just use the code guncon25 not positive how long that will be good but I know Gun Con is June 28th in Ohio. I attached a link direct to the Element Rifle, they have a pretty sweet setup you can build completely out with optic, brake and bipod even. I actually have one on order myself and can't wait to get my hands on it. The rebarrels are even a bit cheaper than MPA we all know of your a PRS shooter ever little bit you can save adds up. Slide on over and check them out.

https://kelbly.com/precision-element-rifle/

For sale is a new rifle I pieced together over the last couple months. Rifle has 35 rounds on it, barrel not even broken in yet. I was planning to shoot PRS sportsman but I just won't have the time this year. No use having this rifle sit. No expense was spared and every part is brand new except the brake. This is a complete ready to shoot rifle that will make weight for NRL Hunter Light (12lbs without magazine) and PRS Sportsman (13 lbs with mag). With a CHAD brake( not included), it comes in at 12lbs 8 oz.

The rifle as it sits weights 11lbs 4oz.
-If you want to shoot NRL Hunter Light this lets you run a 14 oz can or brake and still make weight if you decide to not shoot the titanium brake included.
-If you want to shoot PRS Sportsman, a MDT 12 round Binder plate mag adds 8.3OZ or Non Binder is 7.3 Oz. This gives you 18 oz of wiggle room to run a can or different brake.
-You can use this as a badass hunting rifle. Printed (3) .4-5" 5 shot groups with initial barrel break in with Norma 143 Match factory ammo. This barrel actually shoots better than my 10lbs Match barrels with the same ammo, which is super impressive.

I would like to sell this as a complete rifle, as figuring out what parts and ordering/waiting on them was the hard part. This is a turn key rifle ready to compete. I don't want to part it out as that defeats the purpose.

All Parts are new except for the titanium brake:
-Impact 707R short action
-Impact .473 lightweight 75* Bolt
-Bartlein #13 Carbon Fiber 24" 1-8" 6.5 Creed Barrel with 5/24 muzzle threads (35 rounds on tube)
-Foundation Ezekiel Hybrid Stock/Chassis in Kiamichi camo inletted for Impact 737r/707r.
-MDT Precision Bottom metal with adjustable mag catch
-MDT Send it Level
-MDT Lightweight Single Pull Ckyepod with upgraded Knobs
-Trigger Tech Special 2 stage Flat set at 8oz / 8oz
-Area 419 34mm Hunt Rings, 34MM height
-Leupold Mark 4HD 6-24 PR3
-Salmon River Solutions Titanium Timed Brake
-Short Action Precision 2 round match saver

I put a little over $7K into this setup. Someone is going to get a monster deal and save some cash with a ready to compete rifle, no taxes and free shipping.

$6200 Shipped. I can also break the rifle down and ship you everything but the action if that's easier, your choice.

Mark 5 with tmr reticle
With arc rings

Always wrapped ,in great condition , honestly not that many rounds on it, used on my 6.5 hunting gu n
$1580 shipped conus

No trades






[



ATTACH=full]8714572[/ATTACH]

Glock 17 Gen 5 with Holosun 508T. Slide work done by Jagerwerks. Dawson iron sights. Selling because I have more than I shoot.

$500 shipped.

Razor G2 4.5-27. EBR-7C MRAD. Glass is perfect. Slight ring marks. Comes with throw lever and Defender flip caps.
$1600

View attachment IMG_3967.jpeg

No point in trying to reopen San Francisco’s Alcatraz… when you can do better.

Airfield deep in the Everglades, surrounded by swamps full of gators and pythons and water moccasins and, well, rednecks who think “You got a nice mouth, Jose…” will be a deportation processing facility.

DHS has approved. So now, Pedro, you get to await your due process in a tent. In the Everglades. And if you try and get off the island… well, good luck with that!

Bet after a few days, folks are begging to hurry up that due process and get them back to El Salvador!!

Need one out near Ft Huachuca, too. Scorpions, rattlers and 115 in the shade for miles in every direction is also motivational.

What did one gator say to the other gator? Not bad for Mexican food!!

Sirhr