This is why these Harvard twats need to be defunded into oblivion.

Nah… if men do more housework, today’s Karen’s would squirt out kids like Pez Dispensers.

Sure Harvard moron. Thank god NPR is still on the air so someone will report this sociological blather as fact.

P.S. bet you do the dishes because you are a cuck!

Sirhr

Good morning,

Have a very nice MRAD with two barrels - 26" 300 PRC in carbon fiber from proof, and 24" heavy 6.5 Creedmoor.

Also have the monopod, a few spare rails, two 6.5 CM magazines, and 300 PRC magazine.

Awesome system. But have had for two years and just do not have any place within 6 hours to really stretch its legs, and would prefer something slightly lighter and more portable to shoot more frequently. Also want to move to a gas gun.

Photos below - Optics and Atlas bipod not included. Want to trade for either:

(1) Geissele MRGG (will do gun for gun)

(2) LMT-10, JP Enterprises AR-10, or Seekins SP10M in 6.5 CM plus either optics or a midweight bolt gun in 7 PRC, 300 Win Mag, or 300 PRC.

I have a G36C and was in the process of making a G36K. My question is, have any of you used the SL8-6 as a long range target plinker before?

I'm debating putting a low pro rail and an optic on it. But at the same time, I can sell it to get better optic or other gear for my long range rifles.

It's decision time for me bc the rifle is BNIB still. I have the g36 bolt, stock, fbi 0-1 lower all bnib too, so altogether I can get some decent glass if I sell it all.

Let me know your thoughts if you would make it a fun shooter for a couple hundred yards, or sell it to fuel the never ending hobby of long range gear. I'm really leaning towards selling it since i'm quickly gaining more interest in PRS/Long Range matches at my local range.

Humor me here, trying to get a box or two of older FGMM and Lake City M118 for nostalgia’s sake.

I have 4 boxes of M72 30-06 match for trade. Would trade 1:1 with boxes of M72 I have (pictured below).


And would like to get 1-2 boxes of the below (XM118 or M852 are ok as well):


And

Older M49 spotter. Case is rough. Scope works. I disassembled and cleaned the prisms and shimmed to hold tightly in place. Prisms are very nice, no chips or scratches. Cleaned the objective best I could. The scope is clear and focuses sharp. This is a vintage piece of gear and at 20x they are not for looking at bullet holes. This is an observation telescope. This has an early property tag. $175 OBO

For sale: 6GT done by Meredith Rifles. ------$3,000.00
26in bartlien 5r MTU.
These pictures are from when I had a 6.5x47 barrel on. The rifle looks identical same barrel contour and same cerikote.
Rifle will also come with 6.5x47 barrel
Bat TR
Manners T4A- Folder
Action bedded to stock
Muzzle threaded 5/8th x 24
Triggertech Diamond. Picture shows pro curve but I swapped it out for a flat trigger.
This rifle has under 100 rounds.
Cleaning out the collection. Rifle is perfect. Shoots one hole guaranteed.

Impact Precision 737R 90 Degree 308 size bolt (approximately 150 rounds on it).

SOLD

No price limitation, although I do like diamond in the rough value scopes that punch above their clas.

600yds and in.
LPVO with best 1x non distortion, 1-8/10.
MPVO with side parallax, 10-15X.

SFP preferably, but FFP if I can see the reticle with illumination.

Capped or locking wind turret.

Wonder what he did to piss off the Israelis

Be interesting to find out what they were up to.

Both promoted to command in ‘24 when Biden was pretty much a drooling potato. Would have been a Pentagon move at RADM level. But those are high profile billets.

This is a big deal…

But how big or why big… I have no clue!

Sirhr

Hello all,

I have a somewhat stupid question on bullet seating when seating into a compressed load. I’m noticing one bullets OG will be dead on, the next will be 8k longer, the next 4K longer and so on. I need to adjust the die to each specific round I seat. Is this due to the load being compressed slightly differently in each cartridge? Or am I missing something? All the brass is within .5k of spec, so I know it’s not that.

I used to stay away from compressed loads, but sometimes it’s unavoidable. Everything I’m loading is well within SAAMI spec. specifically 223 with 23-24.5 of N140 under a 75g BTHP.

Any tips or tricks with dealing with compressed loads would be helpful!

good condition 624i with one minor mark on bell, in a spuhr mount. 1750 shipped, PPFF or venmo only, most recent generation.ox.

Let me start off by saying I know exactly how difficult this endeavor is. I've seen the historical posts and people searching far and wide for everything from pins to actions. I've also had the pleasure of having several conversations with individuals who have laid out an enormous amount of detail and history.

Below is a chassis I picked up in January of this year. I've been so busy running my FFL/SOT, shooting team sniper/field matches, sponsoring the International Sniper Competition down at Ft. Benning (where I got to see the MSR first-hand by talking with the Brazilian team and discuss this with the USCG MSRT team) and preparing other competitions, that this has sat in my safe for a good while. However, the fascination with the design and the iconic look make me pull this out and admire it.

I want to start this thread to consolidate information for insight into this specific chassis and what is on it. I want to understand or try to source where these parts may have come from, what era, and what else may have changed along the way. For example, this chassis is not matte but rather has a sheen to it. Likewise, it has no engravings on the magwell. However, the folding stock is a lighter version, not the standard heavy version.

I'd like to know what I'm working with with this piece, and I really haven't dissected it too much insofar as the chassis goes.

I'd love to see this thing come to life and get the time it deserves. For as much engineering and time, money, and energy it required to develop, it deserves to be used.

If you'd like to see this thing come to life and can help outline structured historical or contextual information on certain aspects, it will seriously help me build a full picture of this. I've had conversations with original RemDef employees, but it's a lot to remember verbally.

I'll make a follow-up post on this thread laying out everything I can remember and categorizing it, but I wanted to at least start the conversation off here.

Thank you in advance for helpful contributions and knowledge you can provide!

- SASS Concepts, LLC "Precision for a Purpose"

Login to view embedded media

Not only are they still arresting sober people for DUI , this state TN is refusing to answer any questions about why it keeps happening .

This is after over 300 DUI cases in this same state had to be thrown out because the drives were sober . This does not include the ones who took a deal for “lesser charges” and paid hefty fines .

Terminus Zeus QC SA with a preferred barrels 20” 6 dasher barrel, preferred barrels 22 creed 18”, 22” straight jacket armory .223 twisted flute barrel, .308 and .223 bolts. TT Primary, MDT XRS stock, triggertech special, Nightforce NX8 C640 f2 mil scope with Nightforce 4 screw rings. 40 rounds on the dasher 20 rounds on the 22 creed. Custom pelican case with two laser engraved mags.

Split price:
Zeus qc with .308 bolt $spf
.223 barrel and bolt $spf
Dasher barrel $375
22 creed barrel $400
Mdt xrs $425
NF Nx8 with rings $1800
Case $200
Mags $80 each
Add $25 shipping to any of the split items except the mags

Middle of the night; dude clearing his house and smokes a black bear (sound only works in full screen for some reason):



Thoughts off the top of my head:

Interested in knowing what ammunition he used. Not a big bear, but they’re tough, and usually don’t go down easy.

Nice work on the shooting; looked like good CNS shots right off the bat. Good job. However, less than stellar job clearing the house. If that had been an actual armed intruder, he’d have gotten smoked.

Bonus points for having a sling, but he should have had his support arm through it… much harder to have your weapon taken away from you and used against you. No stone to throw though, he did better than I probably would have done in the middle of the night.

Like new Aero Solus Chassis in anodized Lagoon Blue. Had a RimX briefly mounted in it, but it never left the house. I shelved the project and its been collecting dust since. Come with the original box and paperwork. Asking $600 shipped.

Almost new STI short block in 38 super. Built by Jeff Abernathy at Tommy Guns USA. Has about 200 rounds down the pipe. Getting out of competing. Asking 1750

Odin works complete upper with 18" barrel. Spikes tactical lower, cmmg parts kit, magpul furniture. Cones with 2 5 and a 15 round mag and 2 boxes of hornady black ammo. $850 shipped or trade for xlr mg sa, mpa chassis, carbon stock.. manners ag etc

I have 2 carbon fiber Manners LRH short action Remington 700 stocks for sale. M5 bottom metal inlet. Sendero barrel channel inlet. 3 flush cups, Badger bipod rail and a 1” recoil pad. Carbon fiber finish only…. No paint. I received these yesterday and have no use for them. They do not have a mini chassis so they will need to be bedded or have a chassis installed. They come with factory pillars. $650.00 each or buy both for $1200.00.

Price includes shipping

USPS money order or Venmo only

Pm me with any questions.

I am looking for some image stabilized binos.
Played with some in a non-firearms class and could have sworn they were Vortex but I am not seeing them on the Vortex web site.
I *think* I am looking for something in the 10-12x and trying to stay under $1k but wanting image stabilized.

Any recommendations for general range use and spotting targets out to 800-1000 yds

Deal of the week, Rim X Prefits
We will be offering these as we chamber and test them. I had a bunch of various barrels we had ordered to try; our loss, your gain.
This is a great deal for a person who needs a lighter setup in a Rim X, **Sold**

Next one is 25" 1.250 12 Twist Lother Walther, Great accuracy for the price.

You would think they have learned by now that putting a woke 30 something CEO broad in charge of your American icon is a bad idea.



But not only did it lose a huge portion of its value yesterday during its rebranding and announcement of a pride, initiative, but Cracker Barrel has lost 58% of its stock value since she was appointed in 2023.

This broad must be completely tombed deaf if she has not seen what’s been going on in America the last six months.

She should be removed from her position by the board immediately and terminated.

Remember, it’s a public company so it’s your 401(k) that is eating this.

On the bright side, at least she hasn’t appointed Dylan Mulvaney yet as their spokes faggot.

I have 16 boxes of Hornady 6mm ARC 108gr ELD Match ammo. $27 a box and looking to sell the lot as a whole. I’m constantly finding more rounds lying around so I will include those free of charge as I find more. Probably closer to 340 rounds total.

Lot # 3240392

I have for sale a KRG X-Ray Gen 4 for Remington 700 SA. Included in the package is everything included with the X-ray chassis along with ; an Arca enclosed forend , over molded cheek rest, newer krg grip panels, and BCM Mlok guards. I have the original forend and cheek riser that will come with it. The paint is rattle can and has a matte clear coat for durability. The original color underneath is black. I sold my Remington 700 so I no longer need a chassis. $500 shipped

* the only thing that would be needed is the mounting screws. I can’t seem to find them but they are $3 on KRGs website.