For sale: 6GT done by Meredith Rifles. ------$3,000.00
26in bartlien 5r MTU.
These pictures are from when I had a 6.5x47 barrel on. The rifle looks identical same barrel contour and same cerikote.
Rifle will also come with 6.5x47 barrel
Bat TR
Manners T4A- Folder
Action bedded to stock
Muzzle threaded 5/8th x 24
Triggertech Diamond. Picture shows pro curve but I swapped it out for a flat trigger.
This rifle has under 100 rounds.
Cleaning out the collection. Rifle is perfect. Shoots one hole guaranteed.

Impact Precision 737R 90 Degree 308 size bolt (approximately 150 rounds on it).

SOLD

No price limitation, although I do like diamond in the rough value scopes that punch above their clas.

600yds and in.
LPVO with best 1x non distortion, 1-8/10.
MPVO with side parallax, 10-15X.

SFP preferably, but FFP if I can see the reticle with illumination.

Capped or locking wind turret.

Wonder what he did to piss off the Israelis

Be interesting to find out what they were up to.

Both promoted to command in ‘24 when Biden was pretty much a drooling potato. Would have been a Pentagon move at RADM level. But those are high profile billets.

This is a big deal…

But how big or why big… I have no clue!

Sirhr

Hello all,

I have a somewhat stupid question on bullet seating when seating into a compressed load. I’m noticing one bullets OG will be dead on, the next will be 8k longer, the next 4K longer and so on. I need to adjust the die to each specific round I seat. Is this due to the load being compressed slightly differently in each cartridge? Or am I missing something? All the brass is within .5k of spec, so I know it’s not that.

I used to stay away from compressed loads, but sometimes it’s unavoidable. Everything I’m loading is well within SAAMI spec. specifically 223 with 23-24.5 of N140 under a 75g BTHP.

Any tips or tricks with dealing with compressed loads would be helpful!

good condition 624i with one minor mark on bell, in a spuhr mount. 1750 shipped, PPFF or venmo only, most recent generation.ox.

Let me start off by saying I know exactly how difficult this endeavor is. I've seen the historical posts and people searching far and wide for everything from pins to actions. I've also had the pleasure of having several conversations with individuals who have laid out an enormous amount of detail and history.

Below is a chassis I picked up in January of this year. I've been so busy running my FFL/SOT, shooting team sniper/field matches, sponsoring the International Sniper Competition down at Ft. Benning (where I got to see the MSR first-hand by talking with the Brazilian team and discuss this with the USCG MSRT team) and preparing other competitions, that this has sat in my safe for a good while. However, the fascination with the design and the iconic look make me pull this out and admire it.

I want to start this thread to consolidate information for insight into this specific chassis and what is on it. I want to understand or try to source where these parts may have come from, what era, and what else may have changed along the way. For example, this chassis is not matte but rather has a sheen to it. Likewise, it has no engravings on the magwell. However, the folding stock is a lighter version, not the standard heavy version.

I'd like to know what I'm working with with this piece, and I really haven't dissected it too much insofar as the chassis goes.

I'd love to see this thing come to life and get the time it deserves. For as much engineering and time, money, and energy it required to develop, it deserves to be used.

If you'd like to see this thing come to life and can help outline structured historical or contextual information on certain aspects, it will seriously help me build a full picture of this. I've had conversations with original RemDef employees, but it's a lot to remember verbally.

I'll make a follow-up post on this thread laying out everything I can remember and categorizing it, but I wanted to at least start the conversation off here.

Thank you in advance for helpful contributions and knowledge you can provide!

- SASS Concepts, LLC "Precision for a Purpose"

Login to view embedded media

Not only are they still arresting sober people for DUI , this state TN is refusing to answer any questions about why it keeps happening .

This is after over 300 DUI cases in this same state had to be thrown out because the drives were sober . This does not include the ones who took a deal for “lesser charges” and paid hefty fines .

Terminus Zeus QC SA with a preferred barrels 20” 6 dasher barrel, preferred barrels 22 creed 18”, 22” straight jacket armory .223 twisted flute barrel, .308 and .223 bolts. TT Primary, MDT XRS stock, triggertech special, Nightforce NX8 C640 f2 mil scope with Nightforce 4 screw rings. 40 rounds on the dasher 20 rounds on the 22 creed. Custom pelican case with two laser engraved mags.

Split price:
Zeus qc with .308 bolt $spf
.223 barrel and bolt $spf
Dasher barrel $375
22 creed barrel $400
Mdt xrs $425
NF Nx8 with rings $1800
Case $200
Mags $80 each
Add $25 shipping to any of the split items except the mags

Middle of the night; dude clearing his house and smokes a black bear (sound only works in full screen for some reason):



Thoughts off the top of my head:

Interested in knowing what ammunition he used. Not a big bear, but they’re tough, and usually don’t go down easy.

Nice work on the shooting; looked like good CNS shots right off the bat. Good job. However, less than stellar job clearing the house. If that had been an actual armed intruder, he’d have gotten smoked.

Bonus points for having a sling, but he should have had his support arm through it… much harder to have your weapon taken away from you and used against you. No stone to throw though, he did better than I probably would have done in the middle of the night.

Like new Aero Solus Chassis in anodized Lagoon Blue. Had a RimX briefly mounted in it, but it never left the house. I shelved the project and its been collecting dust since. Come with the original box and paperwork. Asking $600 shipped.

Almost new STI short block in 38 super. Built by Jeff Abernathy at Tommy Guns USA. Has about 200 rounds down the pipe. Getting out of competing. Asking 1750

Odin works complete upper with 18" barrel. Spikes tactical lower, cmmg parts kit, magpul furniture. Cones with 2 5 and a 15 round mag and 2 boxes of hornady black ammo. $850 shipped or trade for xlr mg sa, mpa chassis, carbon stock.. manners ag etc

I have 2 carbon fiber Manners LRH short action Remington 700 stocks for sale. M5 bottom metal inlet. Sendero barrel channel inlet. 3 flush cups, Badger bipod rail and a 1” recoil pad. Carbon fiber finish only…. No paint. I received these yesterday and have no use for them. They do not have a mini chassis so they will need to be bedded or have a chassis installed. They come with factory pillars. $650.00 each or buy both for $1200.00.

Price includes shipping

USPS money order or Venmo only

Pm me with any questions.

I am looking for some image stabilized binos.
Played with some in a non-firearms class and could have sworn they were Vortex but I am not seeing them on the Vortex web site.
I *think* I am looking for something in the 10-12x and trying to stay under $1k but wanting image stabilized.

Any recommendations for general range use and spotting targets out to 800-1000 yds

Deal of the week, Rim X Prefits
We will be offering these as we chamber and test them. I had a bunch of various barrels we had ordered to try; our loss, your gain.
This is a great deal for a person who needs a lighter setup in a Rim X, **Sold**

Next one is 25" 1.250 12 Twist Lother Walther, Great accuracy for the price.

You would think they have learned by now that putting a woke 30 something CEO broad in charge of your American icon is a bad idea.



But not only did it lose a huge portion of its value yesterday during its rebranding and announcement of a pride, initiative, but Cracker Barrel has lost 58% of its stock value since she was appointed in 2023.

This broad must be completely tombed deaf if she has not seen what’s been going on in America the last six months.

She should be removed from her position by the board immediately and terminated.

Remember, it’s a public company so it’s your 401(k) that is eating this.

On the bright side, at least she hasn’t appointed Dylan Mulvaney yet as their spokes faggot.

I have 16 boxes of Hornady 6mm ARC 108gr ELD Match ammo. $27 a box and looking to sell the lot as a whole. I’m constantly finding more rounds lying around so I will include those free of charge as I find more. Probably closer to 340 rounds total.

Lot # 3240392

I have for sale a KRG X-Ray Gen 4 for Remington 700 SA. Included in the package is everything included with the X-ray chassis along with ; an Arca enclosed forend , over molded cheek rest, newer krg grip panels, and BCM Mlok guards. I have the original forend and cheek riser that will come with it. The paint is rattle can and has a matte clear coat for durability. The original color underneath is black. I sold my Remington 700 so I no longer need a chassis. $500 shipped

* the only thing that would be needed is the mounting screws. I can’t seem to find them but they are $3 on KRGs website.

I’m not a vintage gun guy, but my son is. He fools around a bit on the Reddit threads but I’ve told him that, by and large, Reddit sucks.

Reddit usernames/posts often wink in and out, and one has a hard time ascertaining the reliability and accuracy of info given there.

Can you dudes recommend me some good forums out there on post-black powder rifles? I don’t know where else to ask this question and cannot quickly evaluate a forum’s quality.

He likes guns in the Krag .30-40 and 1883 trapdoor Springfield timeframe (the more complicated the loading mech, the better for him lol).

Btw, his interest in this area started via Battlefield 1, the WWI video game. The game is quite fun, and the ammo loading sequences are apparently accurate. Just by playing that game he can manipulate old rifles in the gun stores! He is over 18yrs old, btw.

Recently moved and realized I’ve got some things that I’ve moved from box to box that I’ll never use so they’re up for grabs. All prices include shipping. First “I’ll take it” gets it.

2x superlative adjustable gas blocks. One in .750 and one in .875. Both have seen under 100rds. The 750 ships with a carbine gas tube. $65 a piece

Older raptor by axts charging handle for ar-10/sr-25 SOLD

Vortex 30mm cantilever $75

Vortex pro rings in 30mm high $50

Vortex precision matched rings. 30mm. .875 $90

Badger condition one max mount. 34mm 0 moa
This has been cerakoted to match AI’s sage green. Slight wear $225

Trigger tech diamond two stage. Like new without package. SOLD

Apa fat bastard 3/4 thread. 338 bore $110

Faxon 350 legend barrel. This was originally a 12.5 in gunner profile that I sent to ADCO to be chopped to 9.9in and rethreaded.. Pistol gas length. $125

Leupold freedom RDS. Has one nick in the finish which I tried to get a pic of. Otherwise it looks new. SOLD

I have been a firm believer for quite some time that our culture and our country as a whole is withering. It is a combination of factors that are rooted to the very prosperity that we worked so hard to achieve. Unfortunately a large part of the human nature bell curve can tend to be greedy and lazy assholes.

I've tried to make my argument for this but my own words always seem to fall short.
FF to a friend posting a link to a Bad Cattitude article about this very thing on Substack. Written as an expansion and reply to The Drunk Republican, I think he says it perfectly.

I copied the text from the article, stripped the pictures and ads out of it and have pasted it below.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

FERTILIZING THE MORON FARM

The other day, gatopal™ “the drunk republican” was pointing out one of the odd contradictions of modernity.



But i wonder: is this a contradiction at all? I suspect it is not. I suspect it is, in fact, a sort of emergent property from plenty and wealth and the societal and individual incentives that seem to come with them.

Let us explore this emergent stupidity excursion as, like all such phenomenon, this highly complex and varied structure appears as though it may be well explained by only a few simple causal drivers.

Consider the possibility that the advent of moronical modernity finds its roots in a simple tenet of economics:

when, all else equal, the price of something drops, people choose to consume more of it.

the price of being moronical declined and so consumption of this "good" increased.


Pre-enlightenment, people were poor and life had more notable tendencies toward "nasty, brutish, and short."

It was a time full of severe selectors any of which would both cull you from the herd and assure future generations that genes like yours would not be around to commit further foibles.

The price of moronicality on both the individual and the societal levels was severe and rapid. A world near the edge of its structural carrying capacity to support its humans is a world with small margin for error.

Didn’t lay in enough food or firewood this winter? Guess what happens now.


Allow the nature of your society to become inconsistent with human flourishing and supportive of dependence and predation, and guess what happens then?

How many who fell for “communism could totally work if we just get the right people in charge this time!” are no longer with us to fall prey again?

Such calamity used to be near instant. Now it is a slow burn through the sizable fat reserves of the once replete civilizational success that made everyone so comfortable in the first place.


The “plenty” of the post enlightenment removed these penalties . . . even replacing them with welfare state subsidy.

That's how you fertilize a moron farm.

It's also how you drive and enable antisocial behavior and open up a society to conquest and collapse.


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
If anyone cares to read it direct from the source instead: https://boriquagato.substack.com/p/...GY_SBv96FRA-a7D5Oc_aem_iEbRBfTqrgjFx3bqYXf5cQ

Hi everyone, I wanted to share my recent experience with the Barrett MK22, because I was honestly surprised and think it’s worth discussing.


I own an MK22 with relatively light use (under 200 rounds). Recently, I purchased a 7.62 barrel conversion kit together with the official MK22 armorer’s tool kit directly from Barrett. When I went to install the new barrel for the very first time, using the supplied 140 in-lbs torque limiter and the Torx Plus T30 bit exactly as marked on the receiver, the handguard cracked while tightening to spec.


This was the first time I ever swapped the barrel, using the correct official tools and following the manual step by step. I didn’t expect something like this to happen on a rifle of this quality.


I’m already reaching out to Barrett for warranty support, but I also wanted to post here to see if other MK22 owners have run into similar problems. Even if it’s a rare defect, I think it’s important to share so others know what to look out for.


Has anyone else experienced this, or heard of MK22 handguards cracking during barrel changes?


Thanks for reading.

Tonight's dinner. Cheap but tender and full of flavor. Three steaks of this approximate size were a total of $18.55. This should be an easy one for anyone who knows their way around a steak.