Impact 737 action around 300 rounds 308 bolt nose 1350.00 shipped
No trades

Charles Follett
Darn Fine Shot
[email protected]
812-917=5653

choose one and give why you chose it

I have a mid 2000's NF NXS 5.5-22x56mm Mildot scope (serial M03251). I'm the original owner. It came in a triangular box, but I can't find the box. It does not have zero stop. That's always been a bit of a pain. Sure, I could put tape on it to ensure it doesn't move in the case or in the field, but any time I want to click up, or have changed it in any way, it's always a guessing game remembering which graduations is zero. It's a mind-f$ck. There were people doing zero-stop conversions back in the day, but I can't find them anymore.

I'm considering just selling the scope and getting something newer with proper zero-stop and mil clicks instead of MOA clicks. I know it's a night force but it's also an older night force, so I'm not sure where things are at. I do have a 5.5-25 x 56mm Arken right now and it's pretty good, but I haven't had it long. The Nightforce is currently on a custom bolt action 243 Winchester and is mainly for sniping coyotes etc long range. I was planning to just stick with a 30mm scope. The 34mm Arkens are incredibly heavy and overkill in my opinion and I already have 30mm rings, so I might get one of the 6-24 x 50mm models. Opinions?

Also, if I was to sell it, what would it be worth. There are a couple of small ring marks from but it's extremely clean everywhere else and was mostly a safe queen. I also have Nightforce wings and badger rings, and NF 20 MOA tapered base I don't use now that I should probably get rid of. The scope is currently in Burris signature rings.

Login to view embedded media

Complete sociopathic nut job BUT a top revenue generator so only suspended for 10 days after assaulting a minor for calling him dude . He will let his city burn and illegals control the streets BUT do not call him dude !

Hi all,

I recently broke in a new 6gt build with an ARC CDG. First 20 shots were all factory Hornady/GAP ELDMs and ran fine. My next twenty were my first reloads in 6 gt. Virgin Alpha brass with CCI 450s, 32.5 gr Varget. About 7/10 in each row failed to fire. Light primer strikes. I seated the primers with the Frankford hand primer, though they tended to catch a little on insertion. I’ve since found that i was using the larger primer keyway in the tool with the small primer “ram” piece. I’m not sure if this issue is more related to primer depth or the incorrect tool configuration or something else. Any advice? I’d like to fix my reliability issue with as few trips back and forth to the range as possible since my opportunity to test is limited.



In the picture, the round on the left did not fire, but the right did. What does the rounding on the left primer indicate?

Alright, really don’t want to sell, but realistically centerfire is my main gig. Bought this from training and looked to get into rimfire but I just don’t use it as I used too.

Full rig rundown
- RimX action
- Proof comp barrel 18 inch. (I ran it suppressed, no thread protector)
- trigger tech diamond flat face
- foundations Centurion w/ full length arca rail. (Some weights are also installed)
- Hawkins DBM
- Bushnell match Pro ED 5-30
- Nightforce Rings
- two mags

I may be willing to split. I want to keep it together as much as possible. Would be willing to split glass for now.

There’s about 540 rounds of ammo also included here. 500 unopened unused. This is also an older rimx. I have had no issues with it at all. Shoots amazing.

Shipped VIA FedEx to your FFL of choice

PayPal or Venmo F&F

Feel free to shoot me a PM if you have questions.


Asking $3400 for the full setup.

I have not purchased reloading supplies in quite a while. Normally I will stack deep essentials when the opportunity arises.

Specifically I am looking at adding more primers but I have noticed that prices are still elevated. I still have a stash so I am not in a hurry but it would be nice to top up.

Ideally I will buy CCI 400 and CCI 500 as my primary staples so those typically get preferable treatment. At first glance I saw some Magtech that were cheap but I have no experience with them.

My main question is which aggregation sites do you guys like to use? I used to frequent AmmoSeek but I'm not sure if there are others that I should be looking at as well.

Any other suggestions for places to frequent would be helpful. The regular ones like Midway, Natches, Powder Valley are on the list but I recently priced out the exact same product at one site vs another and for the exact same product one was over $50 more expensive even though they had a 'sale' going on and had free hazmat. In other words the regular price including shipping and hazmat at one site was cheaper than the sale price w/free hazmat.

Basically put it still seems sort of like a free for all as far as supplies go so I am seeking additional input from the peanut gallery.

Do you understand what the Dems & Rinos are doing to steal our republic from us?!

I want to shoot cutting edge mtac 182 g from my 308 using varget powder. Does anyone have load data ? I'm new to reloading. This will be my first attempt. My rifle is an ar 10 with a 24" barrel. I'm planning on single loading.

Gov. Abbott signed a law expanding qualified immunity to non-lethal weapons, such as stun guns and tear gas. And I would assume, bean bags, as well.

I know from plenty of the stories shown in this forum of cops exercising force against innocent people who were misidentified as a suspect. I think cops should be sued for negligent or incompetent behavior.

So, for me, this is a large fail for Gov Abbott.

What if they use the stun gun on an old man in a no-knock warrant at 5:00 am on an old man with a pacemaker? The man or his family should be able to sue and there should be legal consequences.

But often times, QI means immunity from lawsuits.

We get so tied up with immigration and constitutional carry and whatnot that we miss on something like this entirely and none of the congressmen and women seem to really be that worried about it.

If any of you guys ever go to the range testing ammo in say 5 shot groups each, how do you organize and transport it? Are there any boxes or containers that make it easy to store the ammo and maybe notes of what the loads are?

I've been using ziplock bags but it seems like there could be a better way I don't know of

Got 2 NIB Mark 4HD 4.5-18 scopes for sale only asking 975 shipped for each. No trades at this time.

Anybody know more??

Little more retarded than normal…. I finally talked myself putting money down on an m40a1 clone from GAP. Unless I find the correct scope/base I am going to use a Leupold mark 4 hd4-18 scope as a place holder so I can shoot it/see what it can do.

I’m assuming the scope mounting holes are still using 6-48 screws.

I’m thinking just going with a badger base and rings but wanted to see what other suggestions are out there. Scope is big so I am worried about issues with base/screws.

This is Bix n Andy, MPA branded single stage trigger for Rem 700. It was in my MPA 6.5CR rifle, and I used it for less than 100 rounds. I have changed the trigger to two stage, hence selling this one.
Since it is MPA branded trigger, there is no Bix n Andy model number on it, the best I can tell, it looks like it is Bix'n Andy Remington 700 TacSport PRO - X, Single Stage, Top Right Safety, w/ 90 degree shoe trigger. gain, do your own research.

The trigger has small scratches on pain on the top which doesn't affect functionality in any way. A
Asking for $190 shipped in lower 48 states. PayPal F&F (discreet, no comments), Zelle, Venmo and Cash App are accepted.

I have 5 boxes of 500ct 105’s. 1000 LOT 4952, 1000 LOT 5453, 500 LOT 5211.
$225 a box and if you take them all i might do better.
Can take Credit card for a fee.

Selling an ATACR and Badger mount setup.

-------------

Nightforce ATACR 4-16x42 F1, Mil-XT (C615)
Pristine condition. Comes with all the original box and all the goodies along with a set of One Hundred Concepts Ruggedized Scopecaps and is wrapped in Ranger Wrap.

$2200 shipped and insured.

-------------

Badger Condition One 34 MM 1.54" NV Height-20MOA

$250 shipped and insured - buy it with the scope and save 10% on this mount.

-------------

Badger Condition One 12 O'Clock Top Optical Plate - AIM MICRO-34 MM-Tan

$80 shipped and insured - buy it with the C1 Mount and save 10% on this plate.

-------------

Badger Condition One J Arm 45° 1.93" & Micro Sight Mount

$70 shipped and insured - buy it with the C1 Mount and save 10% on this arm and mount.

Site has a 48 hour bump rule. Do not bump before then again or post will be deleted and you will be banned.

Proof Research 25 cal steel barrel up for grabs. Details of barrel in picture. 385 tyd

Cole-Tac D-bag
$40 shipped

Pint-Sized Game Changer-heavy fill-SOLD​

$80 shipped-SOLD

Go get it

I got scammed on a fake ATACR and this is what eventually showed up in the mail. This is a pretty good clone of a Nightforce ATACR 1-8 that uses a DMx-like reticle and appears to be of "decent" material and optical quality. It even comes with a set of Tenebreax/Nightforce branded scope caps (cannot confirm authenticity). It feels robust enough to at least be suitable for 223/556 use. The scope is in what appears to be new condition and will come as shown.

LINK to the manufacturer's product page.

Price: $250 shipped

No trades please.

New Razor Gen III, FFP, 6-36. EBR-7D.

$2250 shipped.

Selling used Area 419 Hellfire Match brake, 30 cal with 5/8-24 adapter. Brake is still in excellent condition with only 20 rounds through it.

$100 shipped.