I have a basically new NF ATACR 4-20x F1 FFP with Mil-XT reticle. It was mounted on my 6arc, and has only one box 20 rds of hornady under it. Currently sitting in a Knights Armament 34mm 1.5” 20moa taupe mount. Also has an mkm bubble level installed.

Only sign of use I can find is a faint ejection mark on the tube behind the windage turret, shown in picture. Otherwise 9.5/10 condition

Comes with box and all original contents.

$2200 shipped for scope with bubble level
$2500 shipped complete with Knights mount

Prices are shipped to the lower 48 only. Insurance is on the buyer. PayPal or Venmo.

I already bought a replacement for it, so no trades please.

Login to view embedded media
No cliff notes on this one - I can’t explain this level of stupidity .

Think what those faggots could do with a million dollars? All the 'advocacy' they could buy. Or Astroglide. Or plane tickets to Provincetown? You know... to advocate for their butt-piracy in Palestine!

I mean... getting behind this does not mean getting "Behind" this. But if we can send a few hundred over to do a "Rose Bowl" parade ending on a rooftop... what a win?

Bah hahhahahaha... Trolling turned up to 11. Because it's one more than 10!

Cheers,

Sirhr

Barreled action:
BAT TR
Bartlein M40 contour 1:7 twist cut at 18.5” chambered in 6.5 Creed
Area 419 Hellfire
Trigger Tech Diamond

$2,000

Complete gun:
Everything listed above
KRG Whiskey 3 Folder with ARCA section, smaller buttpad (have original), and over-molded cheek piece
Atlas CAL Bipods with extended legs and spikes

$3,500

Prices are as low as I’d go being I’m already taking a substantial cut from what it’s worth. I would entertain trades for ZCO’s. Gun shoots phenomenally well, just selling for personal reasons.
I’m out of the country working, so my responses may be limited and delayed. I can try to get more pictures if interested.

Thanks guys

REDDING TYPE-S MATCH, FULL DIE SETS
Complete with bushing sizing die and competition/micrometer seating die.

• 6 GT, Custom (from GAP), Full TYPE-S Die Set (36000): $250 $225 $205 $175 SOLD

SINGLE DIES (not part of a set)

• 6mm Creedmoor, Comp. Seating Die, can't find box (55443): $125 $95 $75
• 40 S&W, Seating Die, can't find box (92253): $25
• 45 ACP, Competition Seating Die (55189): $95 $75
• 7.62x39mm, Seating Die Series B (92129): $45
• 380 Auto, Seating Die Series B (92170): $35

REDDING TITANIUM NITRIDE BUSHINGS

• .267, light use: $28
• .273, new: $28
• .274, new: $28
• .297, light use: $28
• .313, new: $28
• .335, new: $28

Most of these are LIKE NEW.

STUFF THAT IS SOLD

• 223 Remington, Full Die Set (36111): $175 SOLD
• 6.5 Creedmoor, Full Die Set (36446): $175 SOLD
• 308 Winchester, Full DIe Set (36155): $175 SOLD
• .266, new: $28 SOLD
• .267, new: $28 SOLD
• .268, new: $28 SOLD
• .269, new: $28 SOLD
• .270, new: $28 SOLD
• .271, new: $28 SOLD
• .272, new: $28 SOLD
• Sinclair Carbide Expander Mandrel, 6mm (0.242") SOLD
• Sinclair Expander Die, Standard 7/8 SOLD
• Sold as a pair: $75 SOLD
• 9mm Luger, NxGen Premium Handgun 3 Die Set (66172): $155 $125 SOLD
• 6 Creedmoor, Full Die Set (36443): $195 $175 $150 SOLD

Prices are SHIPPED CONUS.
Insurance over $100 is on you, in the unlikely event that you want it. Otherwise, this stuff is yours once it is scanned at the carrier.

First "I'll take it" in the comments trumps pending offers via PM.

I’m swimming in bipods….so trying to move a couple of them to clear out sections of my safe.

Atlas PSR Bipod
Area 419 Clamp(comes with pic clamp too)
SOLD

Atlas CAL
Area 419 Clamp
Spiked feet
$340 shipped

I can't talk about this elsewhere. Have an employee. Not doing well. I'm trying to throw him a lifeline so he can get to retirement. Give him his review, its not great, but its not bad ("I need you to change some behaviors") no PIP or coaching or anything like that.

Dude flips his lid on me. No offense but trying to stay cool and calm was not his strong point.
Tells me the conditions for him not to retire in a month. I'm a little--That's a bold strategy Cotton... (Inside I'm like Well, Bye!)

Now I know I am a mega-flame asshole in here (because I can be), but I apologize for using words like "crap" at work. I'm actually "Mister Nice" (STOP LAUGHING YOU JACKHOLES ITS TRUE!)

Who the hell after a bad review makes demands to stay employed? You guys wonder why I think people are dense as hell. I'm the person trying to help him, everyone else is scared of him..he literally bullied a professor into re-writting his review. So I knew the project he wanted, he was going to get (one of his demands) so to at least make him happy I told him he had be assigned, but I couldn't do the other 2 conditions. It was above my paygrade (Its a copout, more on that in a sec).

Dude then lectures me on how its my job to negotiate with the appropriate pay grade to get what he wants. (I'll take how to get Doc to can your ass on the spot for $1000 alex)

Actually it wasn't much of a negotiation: Convo went like this
"Hey Boss, X wants this or he retires"
"Do you care"
"Nope"
"Good let him retire, he's always pissed off anyway"

As the kids say:
I just can't even....

My new scope and mount is set to arrive tomorrow and the first thing I plan to do is re torque my rail and then get it mounted and thread lock everything, and possibly even thread lock the turret screws (one review showed that they might come loose, but that may have been a one off). My question though is which thread locker should I use, at first I was just planning on blue loctite but now I have discovered a new (to me) product called vibra-tite and it looks like it may have some advantages over loctite. What do you think? Is blue loctite enough or should I find some vibra-tite? If so which kind?

On a related question, the scope rings require 18 inch pounds of pressure but I had a hell of a time finding a torque wrench or driver that would actually do 18 inch pounds, all I saw were marked in 5 inch pound increments so that I could have done 15 or 20 but not 18. Finally out of frustration I just bought an old school beam style torque wrench because I can eyeball 18 (it is marked in increments of 10 with hash marks every 2.5 and also in newton meters and 2 NM is damn close to 18 inch pounds). Are their any issues using the beam style over the more modern click style?

2x ARC mags, short action 308 (only ones ted made). Red followers. One has an a419 extension on it. 170 shipped for both mags.

Has anybody else had any real life experience with the 223/556 68 grain BTHP? I have been reloading these pills and they are moving 2750 fps and shoot 1/2 inch groups but when used hunting varmints they are very disappointing. I have taken 5 coyotes and 3 foxes over the weekend and every one of them have needed follow up shots to get the job done humanely. All first round hits have been in the vitals. I expected a lot better results with this bullet but I think I will go back to shooting soft points after this weekend.

Lightweight buttstock inlet for Vudoo and Vudoo bottom metal. Brand new never had an action in it. Bipod included $850 shipped lower 48

Looking at building a new hunting rifle in 6.5 PRC and am stuck between the tried and true Impact or venturing off onto the Wombat. Was wondering if anybody had much experience with the Wombat and could chime in on some pros and cons on these 2 actions and why I should choose one or the other.

I have a Remington 700 5R Gen 2 in 6.5 Creedmoor that I am approaching the point of getting the action trued and re-barreled.

A little backstory. I bought this rifle about 4 years ago on a whim thinking I would eventually get it trued and converted to a .308WIN and drop it in a McMillan A-4 stock and basically create an M40A3 inspired "Clone". I bought a Bartlein barrel blank a (11.25 twist, M24/M40 contour) shortly after I bought the rifle. A couple years ago I came across an M40A3 spec McMillan A-4 stock and dropped the barreled action in it and this is how it sits now.

I have been testing several factory loads with this rifle and have been frustrated with the lack of precision I have been experiencing. I have tried:

Federal Gold Medal 140 SMK
Federal Gold Medal 140 Berger Target Hybrid
Berger 140 Target Hybrid
Berger 144 LR Target Hybrid
Berger 153.5 LR Target Hybrid

My best grouping with this rifle has been in the 1.25MOA range. Typically, its closer to 1.5MOA. Yes, I do realize it is a factory Remington 700 shooting factory ammo, but I expected better results based on some reviews I read back when I bought the rifle.

What I need help with is trying to decide whether I should stick with 6.5CM when I re-barrel it or go ahead with changing it to 308win?

Also, any suggestions on a gunsmith to do the work?

Thanks in advance,

T

Been listening to one of these guys for a few hours tonight trying to find a lady owl friend. As far as I'm concerned, I'd love for our back woods to be absolutely full of raptors and have been looking into owl/kestrel boxes I can hang in the trees there. Does anyone have any experience/success in growing a hawk/owl population in their backyard woods?

-LD

Gentleman, hopefully we can reach a conclusion.

Q: Is Frank a short hot dog?

Discuss

Just like nee, put it on a rifle but changed directions and it never even made it out to the field. Comes with everything in box like it should. No trades $180 shipped.

Finally put together the ar10 parts I had lying around and it work great once I got the gas block adjusted but then it started having issues ejecting and seemed to really chew up the rims.

I know the AR10 ejectors are normally pretty rough on the brass but I just want confirmation on what I've gathered from forum browsing.

Based off what I've seen it probably wasn't gassed properly, or the buffer weight was off, but weighing more towards improper gassing



This was running it with empty casings just to test cycling, work work fine then every couple rounds it would either fail to fully pick up a round which is probably cause it doesn't have a bullet or fail to fully go into battery

https://forum.accurateshooter.com/threads/130-page-pdf-of-different-chambering-methods.3912170/



https://forum.accurateshooter.com/t...other-chambering-print-pdf-out-there.4090841/

Any chance any of you would have these PDFs hosted here?

Couldn't set up an account at that forum.

Would've liked to have had a copy of these...

Why not let Trump win fairly and do his thing for four years? Meanwhile, they can continue working on their evil plan and unleash chaos after his term ends. How does his becoming the President again really affect them?

On the other hand, are they sacred? because:
- He will expose the new world order, covid scam, and other dark secrets of the govt.
- He will make drastic changes to all branches of the govt. To the point of starting to reform the whole system.

Up for sale is a benelli M4. Good condition with a couple small marks in the finish here and there. Fixed stock and 5 round mag tube. Less than 200 rounds through it. Also have a brand new still in the package Carrier Comp 7 round titanium mag tube with wolff spring and US made follower that will be included. These are currently over a 3 month wait.

Looking for $1850 shipped FFL to FFL

10/28 - price drop to $1700

Its been a few years since I've looked into the HVAC end of things. My parents need a complete system. They had a woodstove before...

Any opinions on:

AMERICAN STANDARD 97% AFUE S9V2B060U3VSA

2 STAGE VARIABLE SPEED BLOWER w/ 10 YEAR WARRANTY

Is this a reliable furnace?


Thanks, Matt

This was my match chassis for the last year. It has almost every upgrade from MPA/Grey Ops and is ready to compete right out of the box. All original parts will also come with this allowing you to play around and set it up exactly how you want. Right now I have it set up with full internal weights, full external weights, Lightweight Matrix Pro 2 Cheek and Bag Rider, and the rest of the adjustable guts pulled out of the stock to keep weight down so it will balance with zero play. The way its setup it perfectly balances with a M24/MTU barrel but if you want to run a Comp Contour or Straight Taper, just take some external weights off. There are a ton of extra grips, thumb rests and other accessories that add up to over $500 with of upgrades over a stock matrix pro. Chassis has some cerakote wear in the hot spots (arca rail, mag well, ect) but shoots perfect.

-MPA Matrix Pro RH Remington 700 Short Action in USMC Red
-Comes with 2 Short LOP Butt stocks designed for positional shooting.
-Full Internal Grey Ops Weights
-Full External Grey Ops Weights
-MPA Bag stop, cut down and blended to allow shooting off rooftops and not getting snagged on barricades.
-Matrix Pro 2 Cheekpiece and Bag Rider to reduce weight on backend
-MPA Locking Collars for cheekpiece so you can always return it to same spot after cleaning.
-Brand new Adjustable Mag Catch
-All the original parts to restore it to stock if you like.
-SS action screws

$xxxShipped

Time to upload that mangy old reloading bench?? I've got an assortment of bougie Area 419 reloading accessories up for grabs - sure to make you feel (and shoot?) better than all your shooting buddies.

Pictured, left to right

• Billet Loading Block, 308: $40 each (1 SPF to SdotW) (1 SPF to jklee)
• Billet Loading Block, Magnum: $40 SPF to platapus
• Master Funnel Kit: $85 SPF to Chgunz
• Die Storage Block, Standard 7/8": $50 SPF to Vitali1342
• (Dies for sale separately)

Prices are SHIPPED CONUS. Insurance over $100 is on you, in the unlikely event that you want it. Otherwise, the stuff is yours once it is scanned at the carrier.

First "I'll take it" in the comments trumps pending offers via PM.

Looks like I may an opportunity for a career pivot and a sizable income increase. But it will require working a rotating shift work schedule. It's been a long time since I've worked any night shifts I'm sure there are better tips and tricks since I did it last. At least I'm older and all of the kids are out of the house.

I'd be working 7 night shifts & 7 day shifts per month (3 night / 3 day / 4 night / 4 day) with 3 or 4 days off, respectfully between shifts. As challenging as it may be, the pay will be enough to allow my wife to retire early.

So...what tips and/or tricks do you have to navigate and tame this mystical beast?
Getting sleep going from nights to days and vice versa
Eating windows during night shifts
Prefered stimulants (besides coke & meth)
Supplements for sleep / daily use
Work out timing

Anything else you can think of. Even weird shit.

Thanks for your help.

Technology is cyclical, these are now in high demand. I will pass on savings to you, only $200 a pager or $35k for the lot.

I will also trade these for a KMW Sentinel, or an LRI or “settle” for a TacOps.

I know what I got. No low balls, (that means you @Threadcutter308, and no jewin down @powdahound76)

Payment terms are $500 a month at 43% interest fir 360 months. They are Jewish pagers after all.