**Chassis only** looking to sell or trade my AI AT factory chassis and vision chassis. It has a target adjustable butt pad, Thumbhole stock, NVG bridge with rail. Not pictured I have buttstock spacers, spigot arca rail for the factory chassis, and thumb rest. i have the original box for the vision chassis and screws for the factory chassis. Not looking to separate anything. Asking $2300 for everything or would trade for a dark earth AI pattern ATX chassis.

For Sale Thunder Beast Arms 50% off Certificate - $OLD

Can mail hard copy or send picture of certificate with code.

Lightly used Vortex Razor Gen 3 6-36x56 - took this off my back up rig so got very little action.

Comes with sun shade, zoom throw lever and MK machining parallax throw lever installed. I can also throw in a IDTS tape for it.

$2000 Shipped CONUS

I have 2 DNT 7-35 scopes in MIL that I’ve decided not to use. They are both MIL and new in the box.

Asking $520 shipped each.

Looking to sell my armageddon gear game changer X bag. Basically brand new. Brown waxed canvas, heavy sand fill.

Looking for $110 sold

Selling new never fired alpha ocd 6 dasher brass. Just opened it to look at it and that’s it. Cardboard wrapper thing not included as I ripped it. Going to a different caliber than anticipated.

$220 shipped for both OR $115 each shipped
PayPal ff or cash app

But what a game!

Looking to sell my Heatseeker for Rem700. Chassis is brand new, only had barreled action put in to see how it looks while waiting for the intended action to arrive. XLR C6 and MDT folder were purchased here both stated BNIB, no wear or scuffs on any of them. C6 has the short LOP to accommodate the folding adapter. Everything has original boxes and hardware from the factory. $575 TYD or open to trades

Really Right Stuff TVC-24L Mk2 w/ Anvil 30 + RRS Tripod Bag.

RRS TVC-24L Mk2 w/ Anvil 30 + RRS Tripod Bag as I've moved to a larger model.
Barely used, tiny ding is highlighted.
Great lighter weight setup for hunting, spotting, photography,

Paypal $1250 Shipped in CONUS.

The Biden Criminal Regime is blocking aid to Helena victims because they're predominantly Trump voters.

Cleaning out the safe and getting rid of my 6.5 CM.

140gr Hybrid Target Lot# P002869 - 300 rds - $600
140gr Hybrid Target Lot# PR001300 - 40 rds - $80
144gr Long Range Hybrid Target Lot# PR000108 - 290rds - $580
153.5 Long Range Hybrid Target Lot# PR000118 - 200rds - $400
153.5 Long Range Hybrid Target Lot# P003069 - 20rds - $40
153.5 Long Range Hybrid Target Lot# PR000541 - 40rds - $80

Take the whole lot at a discount...

All order over $100 is SHIPPED CONUS, otherwise $10 for shipping.

All are Large Rifle Primers

APA Little Bastard: .223 (NEW) SOLD

• 5/8-24
• Stainless
• Bore 0.241”
• $75 shipped

APA Little Bastard: .264 (USED) SOLD

• 5/8-24
• Nitrided
• Bore 0.294”
• $70 shipped

APA Little Bastard: .338 (NEW)

• 5/8-24
• Nitrided
• Bore 0.368”
• $80 $70 shipped

SilencerCo ASR Brake: .223 (NEW)

• 1/2-28
• Nitrided
• Bore 0.265”
• $70 $50 shipped

Daniel Defense Brake & Rise Mitigator: .22 (NEW)

• 1/2-28
• $40 $30 shipped

DEAL/TERMS

• The first public “I’ll take it” will trump pending offers and claims via PM.
• Shipped free to 50 states (where legal)
• No trades

Moved to auction site. No longer available here.


See Part 1 Here




1) B&T APC556 (LE/MIL Version of APC223) Rifle 16" Barrel. Unfired and with an upgraded Telescoping Stock (which cost me about $400, IIRC). I shot someone else's shorty version of this rifle (and in full auto to boot) and it was the softest shooting 5.56 rifle I've ever fired. Get the version that is marked correctly for what it is (a 5.56 rifle instead of the "we have to mark it .223 so we can export it" APC223 Model ). $3,400 Shipped $3100 $2950 Shipped. See pictures below - Note that there's a rub mark on the "left" side just above the safety selector. I can't tell if it's an abrasion or remnant of a sticker, tbh, but I quickly tried rubbing it away without any luck.

Anyone have any info on this round? Been searching and I can’t even find a parent cartridge. Closest thing I can come to is a 300 Atlas.

MPA Matrix Pro Chassis in an olive color. R700 SA right hand footprint. I had a terminus in here that ran like butter. I purchased this used and rocked it for about a season and a half. It is definitely beat up and could use a fresh cerakote. Comes with my custom grip tape which makes it extra grippy on the bag.

$700 Shipped CONUS

MDT ACC with with Rubber Dampeners $700 - Shipped CONUS

Internal and External Weights, and Baker Wings NOT included

Impact prefit bought from proof
6.5 creedmoor
1:8 twist
Cerakoted black
Hawkins 4 port
Barrel has been mounted but never fired. Had intentions of getting into prs but decided I don’t have the time
650$ shipped

Hornady 6.5 Creedmoor 140 gr ELD Match 127rds Batch #81500

SOLD

I have tons of 5.56 brass de-primed and cleaned and annealed but not resized yet. It all comes from stuff I have shot and my friends and shot and stuff that me being a "loot goblin" has picked up over the years at the range. I have 7K or so brass in reserve.

My question is about resizing. I don't really care about brass life as much as I do for my precision guns but measuring an AR chamber seems to be harder then removing the firing pin and extractor and checking bolt lift like I do with my bolt rifles. The only metric I can see anything concrete on is fired brass size and the go/no go gauge. It is worth it to set a FL sizing die to be .003 smaller then the go gauge or something subtracted from the no go gauge for a length?

I'm looking for a set it and forget it sizing die setup for my XL750 tool head with the bullet feeder for bulk reloading.

Do must people just not really worry about it and i am overthinking it?

Harris Bipod with Area 419 Arca Mount $150 Shipped CONUS

Cleaning out my safe. This was the first bipod I ran in PRS competitions. Served me well. Time for another to enjoy. Some signs of wear and tear but functions as it should.

Ok members, been sniffing around for info on these items and many threads are close but way off....I have mucho .223 components and was leaning towards the Tikka (Lite JRTXE312) and the Bravo stock. This is not a PRS rifle, (I looked at build parts and that is not in the financial folder ) but a fun bolt gun that I can shoot on the cheap, keep kids off my beautiful crabgrass lawn, and even let others try it as a starting point. As a certified service rifle slut, many nuances of the bolt gun realm escape me so I'll try to lay it out. Will there be any conflict running AICS mags with that particular stock? I plan to use mag length 77's and the 80's would be single load as needed. Looks like a simple task to drop the action into the stock but wanted to ask if there are any other pitfalls to consider?
The other varmint Tikkas are threaded but not the model I am considering. I'm sure John at Area 419 could thread it but wasn't sure if that would be out of
the question for this model. Wanted to run a can...Well shit....maybe I'll just call over there.... total budget including glass (Tasco scope from 1983 anyone..? ) $1400 - $1500 tops.

As always, thanks for any help and direction. Good luck and good shooting!

Doug

Hey everyone,

I’m working on my first AR-15 SPR build and need some advice on which barrel to choose. I’ve narrowed it down to a few options, but I’m having a tough time deciding. Here are the contenders:

1. Rainier Arms Ultramatch MOD2 .223 Wylde MK12 SPR AR-15 Barrel - 18" Nitride - 420$
2. BALLISTIC ADVANTAGE AR-15 MODERN SERIES 18" Rifle-Length Barrel SPR w/ OPS 12 - 320$
3. WHITE OAK ARMAMENT 18" Rifle SPR Barrel - 630$
4. CRITERION BARRELS INC 18" HBAR Contour, Rifle Gas System, .223 Wylde - 570$
5. CRITERION BARRELS INC SBN Barrel .223 Wylde 18" Rifle-Length - 570$

I’m located in Switzerland, which explains why the prices might seem a bit high compared to what you’re used to in the States.

I’m looking for something that will give me most accuracy at distance. (think 500+ yards)

Any insights on these options? Does anyone have experience with one of these barrels, and how do they perform in terms of accuracy, durability, and overall quality? Or should I consider a different barrel altogether?

Appreciate any help or advice you all can provide!

Thanks!

Any recommendations for a shop that can professionally and reliably (as in not take my stock, money and not have no updates or response to status queries for months on end) fix the target butt system that has fallen out of my McMillan fiberglass stock, as well as do some minor patch work on the gel coat (seal the exposed end of the cheek piece, patch up some areas of the stock where the fiberglass cloth is starting to show)?

Since McMillan has become more a “production company” since they changed ownership, they are no longer doing such post-production repair work on discontinued or low volume stocks/molds.

Thanks in advance!